Impossible to print to network printer with the firewall Windows blocks the outbound connection by default

Similar Questions

• HPO D5560 not print with the black print cartridge

  Having a D5560 printer which stopped printing with the black cartridge.

  Thought it was the cartridge has installed a new (only use HP cartridges) no difference

  After thinking the Black just stopped - no phasing-out quality, etc..

  Ran the cartridge filter (all levels of cleaning) no difference

  Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

  I use this on Windows 8.1. It worked fine for months

  Can't think that I had installed recently HP driver updates

  I have a hardware problem?

  Thanks for any input

  See you soon

  Geoff

  OK, so it's weird.

  Just thought to connect my netbook windows 7 into the printer.

  It print very well with the black print cartridge.

  Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

  Problem solved, but I'm losing the plot!

  See you soon

  Geoff

• The photosmart c8150 print with the new ipad

  The photosmart c8150 print with the new ipad?

  Hi toddgas1,

  Unfortunately, this printer does not support Airprint or ePrint.

• Each page is printed with the word 'project '.

  CP1525nw

  All the pages I print, regardless of what program I have prints, prints with the word 'project '.   I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark.

  I'm wasting toner, paper and time trying to get it to stop.

  I'm running on Mac Os X Snow Leopard.

  First of all, so much thanks to HP for a quick response.  Sorry you're solution did not work.

  I have check the updates of the system to Snow Leopard.  Behold, an update utility from HP printer (or something) worded as it was available.  Downloaded, installed and restart.  Whalla, problem disappeared.

  Go figure.

• I can't print with the printer canon pixma comment do?

  Adobe comment print with?

  Hi marie-josed29443125,.

  Do I understand correctly that you try to print from an application Adobe to a Canon Pixma? What application you use, and you are on Mac OS or Windows? Are you able to print to that you print from other applications (not Adobe)?

  In general, as long as you have the printer set up with the right connection and the printer driver, you should be able to print from applications, including those from Adobe.

  I suspect that you may be running in trouble with the printer, so please let us know if you have a specific problem with an Adobe application, and we will try to get it sorted.

  Best,

  Sara

• It is necessary to check all documents printed with the Flattener Preview

  It is necessary to check all documents printed with the Flattener Preview before sending it to print?

  Only if they have transparency, and even then is not necessarily, although certainly will tell you what is happening to interact. I would not hesitate to consult the overprint preview, however.

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

  + Sorry for my English is not my mother tongue. +

  Hello

  I expose my problem:

  I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

  Configuration of the laptop:

  * Windows 7 Ultimate 64-bit (with all updates installed).
  * All the updated drivers correctly.
  * With the latest version of the BIOS.

  Router:

  * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

  The router configuration:
  * WPA2-PSK AES.
  * 802.11n
  * Maximum output power.
  * Channel: 11 (not automatic, that this channel is relatively free).
  * Width of channel: 40 Mhz.
  * Maximum tx frequency: 300 Mbps.

  Other information:

  The wireless card drivers are correctly then updated (ver. 5.60.48.35).
  * The router has updated the firmware.
  * I tried all the settings of the wireless card.
  * Bluetooth off (without interference).
  * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

  Thanks in advance,
  Greetings.

  Post edited by: Xibalba

  Have you tested using different channels?
  Have you tested speed WIFI connected to another router?

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• Windows 7 will not reconnect to the network wireless after the first connection.

  Hi, we have computers portable windows 7 on a corporate domain which primarily use a desktop lan connection. We have a user based certificate that is registered automatically through Group Policy, to allow wireless access, and another group strategy that puts in place the wireless itself.

  The question we have is: LAN/WLAN switch is enabled in the BIOS.

  User can start and open a session with or without the LAN cable and wireless connections automatically connects them (if no LAN cable not inserted) wireless access point

  Once connected (if started with inserted LAN cable), when the LAN cable is removed, the wireless connection will automatically connect AP (specified by Group Policy).

  If the user then taken LAN cable back in, (after returning from meetings etc...), it connects to the wired LAN fine.

  If the user removes the LAN cable once again, (another meeting etc.) the wireless connection is not automatically connect again.

  The user can open the connections wireless at this point and manually connect to the access point.

  The opposite occurs if the user starts with no LAN cable it inserts after the start and then he removes, the wireless connection does it not connect automatically.

  "Connect automatically when this network is in range" is enabled in group policy

  IPv6 is disabled on the wireless card

  I tried to delete the contents of the Interfaces file in the program data\microsoft\WLANSvc\profiles

  WLAN/LAN switching works fine every time.

  Anyone have any ideas?

  Thank you!!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the wireless connection that isn't automatically. That this computer is connected to a domain network, I would like to advice post you your query in the TechNet Forums.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps. Feel free to write us again for other queries.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Computer XP versus, Brother printer with the IP address of the old computer inside info.

  my daughter has a 'new' xp windows computer, but still has its old brother mfc printer.  the printer prints the computer because its IP address is from his old computer. I have tried everything and you can't change the numbers mask IP, gateway or subnet on the printer in the menu.

  can someone help me?   PLEASE AS SOON AS POSSIBLE, THANK YOU

  I contacted the brother who was a 6 hour ordeal to get no. WHERE.  online, it says hit the + button until NETWORK appears, there no + key!

  I can copy documents without any problems.

  also the scroll on the mouse does not scroll while she has to slide to the bottom of a page to read slowly.

  Thank you!!!

  If the computer is connected with a USB cable (which is what you describe), then IP addresses of the computer and the printer are simply not relevant to the printer connection.  The printer's IP address is used ONLY if the printer is connected to a network using an Ethernet cable (which is the picture above in my previous post).

  Now that we know what is wrong, we will try to understand why the printer does not print.

  Probably the easiest way to proceed is to uninstall the printer (assuming that it has never been installed, which seems dubious) and then reinstall it.

  I'm going to assume that you don't have the CD that came with the printer (if you do not have the CD, see pages 16 to 18 of the Quick Start Guide).

  The following instructions are "Article One" of Cori Bright (http://www.coribright.com/windows/Article_One.htm) which unfortunately seems to be offline at the moment:

  1. Unplug the printer from the PC
  2. Go to the control panel and click on Add/Remove programs.  Highlight any printer software that is listed here.  Select Remove.  (Note that simply delete the Brother here software)
  3. In Control Panel, click printers & faxes.  Right click on the printer in question and select delete
  4. Look at the toolbar.  Select the file, then server properties. Look in the tab drivers.  Highlight the printers drivers listed here and click on remove for each one.  [(Notez que vous n'avez pas à supprimer les pilotes pour les autres imprimantes).]

     4. Note that brother has a 'Uninstall tool' which should perform steps 2 to 4.  I have no experience with this tool, that's why I gave you the manual steps above.  I provided the link to be complete, not because I think that you need to use this tool: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002700/dlf002701.html?reg=us&c=us&lang=en&prod=mfc440cn_all&type2=2&os=7&flang=4&dlid=dlf002701

  5. Restart the PC. Do NOT reconnect the printer!
  6. Go to the website of the manufacturer of your printer.  Search for new XP drivers for your model.  Download the correct software.  If there is no Windows XP drivers for your printer, try to watch those for Windows 2000.  In most cases, these will do almost as well.  For the Brother MFC-440CN, go here--> http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=mfc440cn_all&dlid=&flang=English&os=7&type2=-1 download the file named "Full Driver & Software Package."  Make sure that you are connected as a user with "Computer administrator" privileges before you do the next step.
  7. Run the exe that you just downloaded.  He has auto-démarrer Setup
  8. The software will tell you when to connect the printer.
  9. Once the software is installed and the printer connected, try a test page.  He should feel great now!

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• LaserJet p3015: print with the printer driver universal pcl 5 of Collator

  We use the universal PCL 5 driver for printing on a Windows 2008 R2 file and server to our printers laserjet printing network.  Our enterprise application doesn't have a way to bring together several pages together, so this will be done by the printer driver and settings.  However, I don't see an option to collect pages in the printer settings.  Is this possible with the PCL 5 UPD or it will need to be upgraded to achieve?

  As I mentioned in my previous answer, most small LaserJet printers will not print collate.

  They will just print a copy, or (as your symptoms seem to suggest) just ignore the Collate setting.

  This is because the true ranking of multiple copy requires the use of Mopier Mode, which in turn requires the availability of a hard disk of the printer - printers in most small do not have a mounted hard drive.

  To get the same effect as the standings, drivers for these printers will send multiple copies of the print job in the same connection.

  But they do if the driver configuration indicates that Mopier Mode is activated, so you must ensure that the configuration shows that it is disabled.