Impossible to restart the Satellite C after update critical intsalaltion

Similar Questions

• How to restart the Satellite A100 after update BIOS to version 6.00?

  I've updated my BIOS to version 6.00, but when restarting my Toshiba Satllite the BIOS shows me an error:
  "No TPM or TPM has problem.
  The ram test has passed but I can't get into Setup and BIOS freeze after the RAM test
  Do you understand what the problem is and how I can find the solution?

  My model is: PSAA8C-TA402C

  I speak and write better French-language.

  Thank you

  E-mail: [email protected]

  ASP you last chance I understand that s too far from your city, but there is nothing to do. Communicate with the guys and maybe you will have to send the laptop to the ASP.

  Good luck

• Impossible to restart the iphone 6 after the white screen

  Screen went blank (White) disabled through holding "home" button and the Start button / stop together, phone expected to restart, but it didn't. attached to load but once again nothing... any ideas would be greatly received.

  Connection in recovery mode would be the next thing to try before repair. Check out this article on this subject:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• How to make the paper dirty after update links?

  Hello

  I use the code to update the link between resources by providing new URI below. The relationship between resources are updated, but the document is not become dirty.

  InterfacePtr < ICommand > updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));)
  UpdateCmdData InterfacePtr < ILinkResourceStateUpdateCmdData > (updateCmd, UseDefaultIID());

  updateCmdData-> SetResource (REF.) GetUID());
  updateCmdData-> SetDatabase (REF.) GetDataBase());
  updateCmdData-> SetNotify (true);
  updateCmdData-> SetUpdateAction (ILinkResourceStateUpdateCmdData::kUpdateURI);
  updateCmdData-> SetURI (newURI);
  updateCmd-> SetUndoability (ICommand::kRegularUndo);
  CmdUtils::ProcessCommand (updateCmd);

  How to make the paper dirty after update resources?

  Thank you

  Use PreDirty(); before your change.

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Work of card reader that after I restart the Satellite P305

  I was wondering if anyone else has had this problem. I have a P305 and is the only way that the card reader is working after I restarted the computer.

  If I insert the card and then take it out and try reseating the computer cannot read the card.

  Please if anyone can help.
  I called technical support, but they don't have a clue.

  Thank you

  Hmm, it sounds a bit as the Plug N Play service and the Smardcard would be disabled or wouldn't run properly.

  You can check if these two services are running.
  You can check this in;
  Control Panel-> Administrative Tools-> Services

  There you can disable and enable the services manually.

  The other option would be a reinstall of card reader driver.
  Check it out!

  Concerning

• Can't see the imdb videos after updating to firefox 39.0

  After updating firefox 39, I can't see videos online in some websites like imdb, marca.com, etc. Only works on youtube.
  I disabled Adblock and noscript, but continue the error.

  It's embarrassing, I just restart computer and all start work very well, I didn't remember the last time I have shut down or restart my pc, so it's all...

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Satellite U400 - after update BIOS lighting lights

  Since the update the BIOS on my U400-15E (Vista 32), lighting of the multimedia keys, touchpad always turn after the restart, recovery from the sleep or Hibernate. Touch the illuminance on the off button once does that second touch them will turn off until the next reboot.

  Illumination is disabled in the configuration of the bios and also through HWsetup. After reboot/wake up, without touching the illumination button, accessing the illumination in HWSetup tab / illumination is shown as turned off even if it's on. Touch the power button can toggle illumination to without changing the real light on keyboard. Next key activates / deactivates them both off.

  This isn't a pain important but very frustrating. Any ideas?

  Hello

  A friend of mine had a similar problem with the buttons of the illumination and the reason was an update of Windows or software that is not compatible.
  Anyway, he did also reinstall the VAP and updated the BIOS but no luck. At the end of the story he reinstalled Windows using recovery disc HARD option and everything worked very well.

  Maybe a new facility with Toshiba Recovery disk or HARD drive recovery option can help you, buddy.

  Good luck!

• icon in the invisible dock after update to 10.11.2

  Did the update to 10.11.2 on my Mac Mini 2.5 Ghz.  Problems connecting after installation.  Scheduled to start in safe mode, before I could see the desktop.  After I restarted in normal mode, most of the icons in the dock was invisible.  They are still there, if you place your cursor on the dock, he wrote the apps, but the icon is invisible.  Had to manually reset individually.  Updated very buggy...

  How do "reset you manually?  I have this too, but only for a few apps and only on the right side of my Dock.

• I got the blue screen after update

  Hello. I got a bluescreen error after update my entire system today. He wrote:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1030

  More information about the problem:
  BCCode: 116
  BCP1: 85F5C510
  BCP2: 8E813DE0
  BCP3: 00000000
  BCP4: 0000000D
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  And continued to restart every time I went into IE games, etc.
  What should I do?

  Hello

  Have you updated your screen/video or other great drivers latetly - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there. (Analysis of thethe)
  Minidumps is not necessary that you have updated the video drivers because it is
  very often the cause of the issue and only if the BSODS continue.)
  

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ---------------------------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a period of time
  instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• iPad is no longer the computer charges after update to iOS 10

  Given that I have updated to IOS 10 on my iPad 2 Air, it will not load using my computer (an iMac) or when it is connected to my car.  It worked until I updated.  No idea how to make it work again?

  -Mike

  Try restarting the iPad.