Impossible to run as administrator. Disabled UAC administrator

Similar Questions

• Administrator privileges, can not uninstall, impossible to run as administrator

  Hello
  I try to uninstall a program, and he said 'you must be an administrator to remove this application. To remove this application, you can log on as an administrator or contact your technical support"or else he says"you don't have sufficient access to uninstall x. Please contact your system administrator. I thought that maybe I had no ownership of the file to uninstall so I found the folder of the program, right click Properties, then advanced, security, then the owner tab. My profile name is displayed and I click on edit, but it says in a window of Windows security "cant' open access control editor." access is denied. "

  OK, so I'm the administrator as I have only one user account. I then tried to follow this advice, http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile, on a corrupt user profile setting, but ran into problems. I notised that anything with the shield symbol reacts when I click it, that is, under user accounts, click on "Add or remove user accounts", but there is no reaction. The same for the change of name of the account, type, manage another account and change user account control settings.

  Also, I tried to start in safe mode. He has successfully uninstalled one program (peerblock) but for the other (private tunnel) says it is not accessible in safe mode.

  I have just tried to run programs as an administrator and a similar error occurs - "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I uninstalled some programs a week ago and tried others just a few days back which is when I noticed the problem. So, in general, my problem seems to access anything whatsoever with administrator privileges.

  I am under W7 32-bit.

  I hope this is enough information.
  Kind regards.

  Hi again,
  so, ok, I have a firewall, which I had eliminated as the cause of the problem by setting it to allow traffic. However, he just informed me blocked traffic even if its set for allow. I stopped and tried what I could not do more high and everything works again. So in short, the problem was me or PrivateFirewall...

  Thank you

• Unable to disable UAC errors: to continue, type an administrator password, and then click Yes, but he is nowhere to type a password and Yes is disabled.

  Original title: to continue, type an administrator password, and then click Yes, but he is nowhere to type a password and Yes is disabled.

  Yesterday I just reinstalled Windows 8, replacing the preview of the version and the official version.

  I would like to disable UAC and various other things, but I can't.
  Do you want the following program to make changes to this computer?
  Control parameters of account user (or almost anything from the control panel)
  To continue to type the administrator password, and then click Yes.
  There is no area password to type in. He 'bumps' when I type. I can only click on the No button or display unnecessary details.
  I will not restore the system on a new installation. Apparently, it's an old bug that has never been fixed because you can just tell people to do a system restore and close the book on the complaint. If please post a proper fix and stop wasting users time.
  Hi, I know I'm a little late to the party, but I found this post faced a similar problem and thought that post my findings.
  I found a work around for this problem, which does not require a reinstall of Windows, but you may lose your user account.
  Summary:
  The problem is that in Windows 8, the administrator is inactive by default, you will have to find a way to activate it. You can enable the admin account as an administrator,.
  However. Fortunately, (on my machine anyway) it seems that you can access your hidden from the Safemode administrator account. If your first set of objectives will be as follows:
  -starting in safe mode
  -Log in as an administrator
  -l' administrator, enable the account administrator similarly.
  -Restart your machine and you as an administrator outside of safe mode (normal mode).
  From here, you should be free to do what you want. Now that the admin account is active, you are allowed to type a password when prompted (by default that the password is empty). For me, however, when I tried to promote my previous user administrator account (among other things) I noticed symptoms that seem to indicate that the account ceased to exist. I went through measures to set up a new account and get it synced with my microsoft email account.
  -Create a new user account
  -give administrator rights
  -remove my old (for some reason, hidden) account
  -Sync to the top of my new user account with microsoft e-mail account.
  Directions for use:
  How to get admin access:
  (1.) start in safe mode. You can make it easier by opening a command prompt (Start menu-> type "cmd"). And type "shutdown/r/o".
  2.), your computer begins to restart, but give you a set of troubleshooting options. Choose troubleshooting->-> start of the Advanced Options settings.
  3.) after reboot and enter safe mode, users of contactor by going to the start menu-> click on your user name-> and choose administrator.
  4.) Windows will begin the first initialization for this account.
  5.) once connected, open the command prompt, this time as a Director. (Make a right click-> Run as administrator).
  6.) type "net user administrator / Active: Yes" to set the admin account as 'active'. It will now be shown outside of safe mode.
  7.) restart your computer and log in as administrator again. You can now add users and to play with the permissions etc. (metro options are not available in safe mode, where the reset).
  How to remove your old account of 'lost' and synchronize your new account with the microsoft account.
  1.) create a new account via the control panel users. Don't forget to give you administrator rights.
  (2.) to remove your lost old account by typing "net use /del" in an administrator command prompt. You need to know your old account name, good luck with this one.
  3.) go into the settings of your pc: open the context menu on the right-> settings-> "change PC settings."
  (4.) to go to the users-> Select 'switch to a Microsoft account» tab
  I hope this helps!

• My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

  My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

  There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.

• Cannot disable 'Run as Administrator' in Outlook 2103

  I can't disable "Run as Administrator" when I open Outlook 2013.  I tried repair (both fast and online), rebooted the software (twice), confirmed in 'Properties' that "Run as Administrator" box is NOT checked.  Yet, whenever I open it, it runs as an administrator - which means that I can not do research.  Help!

  Post Office forum for a faster response.

  In a search of this forum, I found this - http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-starts-configuration-every-time-its/b3c619b0-0020-48c6-b800-bf4b764b1cb9

• I'm unable to download the updates for Adobe reader 10.1.1. Win 7 claims that I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Here's how you can find your status:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:

  NET user "user %%nom.
  What do you see under "a Local group memberships?

• How can I disable enable "Run As Administrator" of the web browser?

  I inadvertently changed Firefox to "Run As Administrator" status a month earlier, trying to accomplish something irrelevant, now, when I had no undersatnding of what I was getting myself into. I assigned it ONLY for Firefox, by right-clicking. It is a problem of NTFS permissions. I tried to learn just to reverse this trend and take FFox its normal state where I can open it without having to click a box 'Continue' through the frame. Area of the user, or need to enter a user name and password when a Standard ACCT. No one else using my laptop but me - I just split the thing in 3 diff. accounts for purposes of mode of life/segregation.

  I uninstalled FFox, choosing to NOT preserve settings, cookies, and etc and started from scratch with a new re - install. and it made no difference. It still retains security on the icon shield, running in admin. mode. What now?   Thank you...

  Hello

  From your problem description, I understand that whenever you try to start firefox, Windows ask permission.

  If there was any misunderstanding, let me know.

  Please follow the steps below to resolve this issue

  Right-click on the firefox icon, click Properties, and then click the Compatibility tab.

  Under privilege level, uncheck the box run this program as an administrator check box, and then clickapply.

  Now, click on show settings for all users

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Under privilege level, uncheck the box run this program as an administrator checkbox and then click OK.

  I hope this helps

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Portege R830 - fingerprint authentec AES1660 "run as Administrator"

  Hello everybody,.

  is it possible to configure digital footprints toshiba while there is no need to enter the administrator password when I run some application by the "Run as Administrator" option in windows 7.

  I would use as a single fingerprint (without UAC modyfication).
  I know that it is possible in the previous drivers without toshiba software.

  My configuration:
  Laptop: Toshiba R830
  Fingerprints AES 1660 (driver version: 9.0.8.21)
  The fingerprint utility version: 1.0.3.54
  OS: Windows 7 Pro x 64

  Kind regards
  Przemek

  Post edited by: pmantaj

  > I would like only fingerprint (without UAC modyfication)

  You can change the settings of the UAC

  Try to set the cursor never notify

  Go to user account control settings. Click on the link "change user account control settings.
  In order to disable UAC, move the slider to never notify it the position, and then click OK.

• Open administrator cannot open any programs unless you run as administrator.

  .. .UAC not OPEN cannot open unless you run as administrator programs.  IE9 IS NOT ONLY IS NOT OPEN

  Hi ionpetcu,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Disable user account control and check.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users.

  Method 3: If the problem persists, create a new administrator user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  For reference:

  How to enable and disable application Setup detection in user account control?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-enable-and-disable-application-Setup-detection-in-user-account-control

• Cannot download Adobe digital reader get box asking to run as administrator

  I tried to download Adobe digital reader and when I try I get a race as a box with two options

  (1) saying run the current user who is not checked

  and

  2) run as administrator is checked, I try to add my password and tells me it failed. I'm the admin under my name, so I tried to move to the current user and are not said that I am not authorized

  something I can do?

  Make sure that you turn it back on UAC.  You may download an older version of the UAC must be disabled.

• cannot open programs by right click and run as administrator

  had a virus earlier today, I think it was the security of windows one... anyway I got rid of it with malwarebytes and restarted my computer. now, for some reason, I can't run programs without going through a right-click and run as an administrator.
  When I try to run normally (left-click) I get this window "open with."
  I'm not very good with technical terms, but I tried several fixes that have failed

  When I right click, open properties, then open the tab compatibility... "run this program as Administrator" button is grayed out so I can't do anything with that.

  turning UAC enabled or disabled dosent seem to do anything.

  Some programs are completely inaccessible, (like microsoft word)

  I also watched regedit but as didemt not a lot of sense to me at all. If anyone could break how to fix this step by step before reinstalling the DVD (which I did not), you will be my best friend

  EDIT: I followed this link of early wich looked like the same, but the link of download in the best masculine seems to not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-open-programs-unless-run-as-administrator/e939ba45-c6ab-499d-AB21-433e7314d344

  Hello

   

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Activate security software once everything is done.

  Method 2: When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you follow

• Run as administrator does not not for files bat inside the folder names with special characters such as)

  Dear all,
  I am unable to run any file beats with "Run As Administrator" when the bat file is present in a folder that has (in his name.
  For example: I main.bat in d:\test (_8july) \main.bat.
  The content of main.bat is like that.

  c:\windows\system32\cmd.exe /C "e:\test.bat."

  The content of test.bat is like this:

  echo 'test' > %temp%/test.txt
  pause

  If I double-click main.bat, I can see the file text.txt being created and 'test' written in it.
  If I click with the right button on main.bat and select 'Run as administrator', cannot run the file beats and I get the error "d:\test" is not a recognized command.
  How to handle these situations?

  If I run as c:\windows\system32\cmd.exe /C 'd:\test (_8july) \main.bat' to 'Run' in Start menu cannot run little. It gives the same error "d:\test" is not a recognized command.
  If I run as c:\windows\system32\cmd.exe /C "" d:\test (_8july) \main.bat"" it can work and works very well.
  So, the question is when we choose 'Run as Administrator', it takes the file bat as insead "d:\test (_8july) \main.bat" of ""d:\test (_8july) \main.bat" is there a work around for UAC, we can pass the correct string

  Thanks in advance
  Rambeau

  Hi Raghu,

  Your question of Windows is more complex than what is generally answered in the answers from Microsoft Windows Vista forums. It is better suited for the IT Pro TechNet public. Please ask a question in theForums of Scripting on TechNet

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When to use "Run as Administrator"?

  Hello

  I have Vista Home Premium on a pc where I am the only human user. My Vista account seems to be an "Administrator".
  I have UAC on, but the 'silent mode' value using a tool called TweakUAC.

  Recently, for one reason or another, I became somewhat obsessed by running installation executable and some programs using "run as Administrator" from the context menu of the right click, just in case where he contributes in one way or another.

  So my question is, how do I know when I should / must "run as Administrator"?
  It is clear that otherwise, I'll see a "permissions" pop up error, or maybe the executable I run will be block/crash?

  Thank you
  Lee
  UK

  It is easier than you think. System and installation tools and others only when necessary and you
  that it is safe. The Google link can help answer the rest of your questions. There is not 100%
  good answer as judgment will always come into play.

  Rob - bicycle - Mark Twain said it is good.

• Run as administrator

  Why Windows 7 always tell me that I have to run as administrator when I'm already logged as administrator? Then he gives me no options. I hate Windows 7

  Paula,

  The "built-in Administrator account ' that nika0 referred to as has no UAC invite [those who mind].  If someone gets to fool you by running a file infected of any kind, nothing to protect your system.

  In a normal account, UAC guests allow you to examine why something has requested access to other protected areas of the computer so you can decide to grant or refuse permission.  This applies to normal administrator thus accounts because they will in the same way that standard users until this UAC prompt accounts is approved and even in this case, it's just the approved program that is allowed to continue.

  You should only see the UAC guests when you do something that might affect other users of the computer [or could affect their if there was other users].  I can imagine no burning disc that would generate the UAC prompt.

  I wonder if your account has been corruption.  This can happen without specific cause identified, but shut down Windows without going through the procedure of his power right off is considered a probable cause. I suggest that you create a new user Admin in Control Panel [view by - small icons, as applicable], user accounts, manage another account, create a new account.  Then repeat this disc you have recalled to burn.  If it works without causing a UAC prompt then you can conclude that your account has corruption.  If you get the same answer so I'm wrong and you can ignore me.  Please, do not post back with the results.

  If you want to say what other examples, you had to get the UAC guests, I can also tell you if they its normal.

• How can I enable the "Run as Administrator" install a program in Windows 7 64 bit Home Premium

  Hello

  I am trying to install a backup program on my computer. I am the administrator and the only user of this computer. When I right click to install the program I do not get the "run as Administrator" option, but install. (For this program only all others I get "Run as Administrator".) After changing the UAC I still could not install. I then installed 'Take Ownership' in the menu, but still can not install the program because that supposedly, I do not have the necessary privileges. Then I contacted the manufacturer of the program and told me...

  Based on the problem that you are experiencing, it is a possible solution, we have tried before.
  I need you to delete a file (ctd.db - it can be represented by ctd right on your machine depending on settings)
  Go here:
  C:\Windows\System32\config\

  The path to this program on my pc is not not than stated previously. I could not remove him. I tried other methods without success. Attempted to create another account as administrator, but was not allowed to do.

  Any suggestion will be highly appreciated.

  Thank you

  Hi Andre,

  I'll take what you wrote into account; However, I think I may have found my answer. Here is a link to what I intend to try. Perhaps you and others may find this useful.

  http://www.howtogeek.com/124087/how-to-create-a-shortcut-that-lets-a-standard-user-run-an-application-as-administrator/

  I'll get back to everyone in a near future to let you know if it worked.

  Thank you.