updates to the U4M1I208 and U44M1I216 error codes

Similar Questions

• Impossible to run Windows Update, get the 8007370B and 8007371C error code

  I could not update vista windows for many months, I currently have 30 updates update download but unable due to the error of the codes 8007370 B and 8007371 C... Help!

  I think that my computer was infected :(

  Just out of curiosity

  1 - What is the installed security/antivirus suite.

  2 - and what other security software you run, if any?

  3 - is this 'software firewall' the Windows Firewall or a third-party firewall? If the latter, what is the name of this application.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• get the 641 and 80070641 error code during the installation of Windows updates

  Original title : not able to have windows updates installed on the pc have vista and get code error 641 and 80070641 - what it means and how can I solve this problem please?

  Not able to install updates windows for my pc with the vista system. I keep getting error 80070641 and 641 codes. What do these error codes mean and how can I fix updates can take place please?

  Hi bvwga,

   
  Thank you for updating the State of the question.

   

  What is the error message you get when installing these specific updates?

   
  Follow the steps mentioned below and check if that helps.
   
  Method 1:
  Follow the steps in the link and check if the problem persists:
  http://support.Microsoft.com/kb/822798
   
  Method 2:
  Download and install KB2598041 and KB2596871 manually from the following link and check if you are to install it:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29372
   
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29362
   
  Method 3:
   
  You can try the suggestion mentioned in the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/security-update-for-Microsoft-NET-Framework-4-on/b57fc365-1b9d-48D3-a0ca-5568b64b31ed
   
  Hope this information is useful.

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• Net framework security update 4 KB2160841 66A___Help and support error Code: _

  Hello: I get the above message when you try to download the updates.

  Any help would be appreciated.

  Thank you.

  See the Srinivas R response to a previous post about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/31151006-dfd4-4B93-85EC-26ac470df87c >

• MBR is corrupted, not able to repair the MBR and get error code 0 x 490

  Original title: MBR is corrupted

  MBR is corrupt repair action: repair disk metadata - result: failed - error code = 0 x 490

  Hello

  According to the description, I understand that you are not able to repair the Master Boot Record (MBR) and getting the error is 0 x 490.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: Execution of restarting the Windows recovery environment (WinRE)

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  1. Insert the Windows installation disc in the disc drive, and then start the computer.

  2. When the message press any key to start from the CD or DVD is displayed, press a key.
     If your PC does not automatically detect the media

  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.

  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.

  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.

  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.

  1. Select a language, a time and a currency, a keyboard or input method, and then click Next.

  2. Click on repair your computer.

  3. In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.

  4. In the System Recovery Options dialog box, click on repair your computer.

  5. Click the operating system you want to repair, and then click Next.

  In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files): https://www.Microsoft.com/en-us/software-download/Windows7?WA=wsignin1.0

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

• Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

• Click repair your computer.

• Click the operating system you want to repair, and then click Next.

• In the System Recovery Options dialog box, click command prompt.

Type Bootrec.exe, and then press ENTER.

See the following link for more information:

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

http://support.Microsoft.com/kb/927392

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• try to install the update from the window and get error 0 x 80070424 for sure what I'm doing

  I try to run windows update and get the error message 0 x 80070424 what to do to fix this

  Hello

  1. have you made changes on the computer before this problem?

  2 is the issue specific to update?

  P Ed methods in the following article:

  http://support.Microsoft.com/kb/968002

  Update check fails;

  If you go to windows update by clicking the Start button, in hit and enter the type of search windows update box, click updates to review, and it will show you what that is either installed or not updated.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Win 7 will not update with 9 59 and 643 error Codes

  Were you able to copy and paste all command at the command prompt? It is normal that FORFILES to have a/c more than once as long as the other/c is contained in the order framed by double quotes.

  If in case you weren't able to copy the entire command, there is a possibility that he will not run.

  See screenshot below for the examples provided by the Forfiles command:

  

  

  Please repeat the steps listed above and an update on how it goes.

  Any new ideas?

  Please consider running Disk Cleanup, "Cleaning Windows Update" option. This operation requires a reboot that you won't be prompted to enter.

  Best regards, VZ

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

• I try to install the updates and still error Code OX643

  I have a XP system and I try to update each time I get an error Code OX643 I'm just an average user nothing special on my computer. Help, please

  The system says a security update for Microsoft .NET Framework 1.1 SP1 on Windows XP 2008 x 86 (KB2656353) has failed.

  Hi ClydeShaffer,

  Follow the troubleshooting steps in this document to resolve the problem with the error 0 x 643. If these troubleshooting steps do not resolve the problem, please let us know and also provide the PA information be requested.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Error 42 and 48 https://forums.adobe.com/thread/1893316

  Error 49 https://forums.adobe.com/thread/1491394 and https://forums.adobe.com/thread/1353632