Impossible to stop or restart the pc :(

Similar Questions

• When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Restart mail Windowas

  When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Try to compact and repair the database (see www.oehelp.com/WMUtil/).  There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two.  So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).

  Steve

• Can I stop or restart the Task Scheduler service from the command prompt in Windows 2008 service?

  I'm on Server 2008. I have a scheduled task that is not working properly. I went to Services, and I see that it is configured to start automatically and it is actually being run. The problem is that I can't stop, pause, or restart the service. Y at - there a command I can run that can stop or restart the service?

  Why not with the right button of the job itself in the Task Scheduler, and then stop it?

  There are several methods to stop the Task Scheduler service that. Here's one of them:

  1. Create a task scheduled, called 'StopScheduler' as follows:
     -Triggering factor: at boot time
     -Command: sc.exe
     -Settings: time stop
     -User: System
     -Run with the highest privileges.
  2. Right click on the task of StopScheduler, and then click Run.
  3. Solve your tasks.
  4. Restart the Task Scheduler.
  5. Disable or remove the task StopScheduler.

  Note also that this forum focuses on the issue of Windows 7 in a domestic environment. There are dedicated forums for Server 2008.

• Stop and restart the cssd on all cluster nodes

  Hello
  
  Release our system to operate under linux Red Hat Enterprise Linux Server 5.3 (Tikanga) 2.6.18 - 128.1.1.el5
  Our ASM is 11.1.0.7.0 block of POWER 2
  Only ASM is clustered. Databases are not.
  2 cluster nodes (Clusterware 11.1.0.7.0)
  
  I have two questions:
  1. we need to stop and start the cssd (crsctl stop crs, crsctl start crs) on both our 2 nodes of clusters.
  In our test group, I stopped first the ASM and dbs all running on 2 nodes
  Then I got arrested and restarded the cssd on the first node, and then on the second node. What is the good order or procedure?
  I noticed after the cssd (crsctl stop crs) stopped the process "/ bin/sh /etc/init.d/init.cssd fatal" was always present. I waited for 30 seconds, but he was always there. Then I restarted the cssd (crsctl start crs) in any case. Why was the fatal process always there? It happened on both nodes. After you restart the cssd, I killed the "/ bin/sh /etc/init.d/init.cssd fatal" on both nodes. He was evidently reappear.
  
  in the event that we want to restart both nodes of the cluster, should 2 - I start by disabling the crs before restart the cluster of 2 knots (crsctl disable crs), and then turn it back on after that 2 linux servers are back (crsctl enable crs)?
  
  Thank you, man

  Hello

  So, for the closure of this thread, which is the appropriate procedure - for them stopping and restarting the cssd on the two cluster 2 node - among the two below:

  1 - do a "crsctl stop Sir' and then 'crsct start crs' on the first node. Then do the same thing on the second node
  2. make a "Sir crsctl stop" on both nodes. Then do 'crsct start crs' on both nodes

  I want to avoid is the two nodes start to restart because of the cssd.

  You can run 'crsctl stop/start' at the same time on both nodes or so as you want (1 or 2), no problem.

  If you start the clusterware on a first node and later the second node, just make sure that all services who were on the first node the second node have been properly resettled on the second node.

  Kind regards
  Levi Pereira

• Would never be able to stop or restart the computer in the menu after the 10.11.5 update and cannot get the 10.11.6 because iMac restart

  After the 10.11.5 update, that I could never restart or shut down my iMac (late 2013, 3.2 GHz Intel Core i5, 8 GB 1600 MHz DDR3) using the new menu. I can only stop it by pressing the button for a few seconds. I saw a few discussions addressing the question here and have tried to implement some of the solutions proposed, such as restarting in safe mode, deleting the application from Wacom-, but nothing has worked. Now I can't get the 10.11.6 updating or update my Adobe Creative cloud, incidentally, which became available to me, because I can't restart the computer. Do you know if this update would be better and solve the problem? Is there a way I can get this update even if I cannot restart the computer, or even to restore the system to an earlier version?

  Perhaps run EtreCheck and post the results here.

• Message Stop 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0) when to stop or restart the computer.

  Original title: message of stop 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0).

  Hello. I am running windows xp sp3 (sp2 initially update) when I try to stop or restart my computer I get a blue screen that says stop: 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0)

  Kbdclass.sys-
  address F880E9AC
  F880E000 base
  datestamp 48025372
  Help, please.

  Hi monicashannon,

  1. are you experiencing this problem after installing Service Pack 3 or you have made other changes to your computer?

  2. what processor you have on your computer?

  You can follow this link & check if the problem persists:

  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"

  Reference: How to troubleshoot a Stop error 0x0000007E in Windows XP?

  Hope the helps of information.

• Vista update: he couldn't stop to restart the computer. Help!

  Once more Windows Update restarted the computer, loss of data and working hours.  It is true that this cannot be avoided?  He took over & could not be stopped.

  I was just finishing a long process of renaming & move files on a DVD burning program, when I saw the Windows Update window that displays a countdown to restart.  There are 2 options: (1) restart now & see (2).  But the option to "Defer" is grayed out.  Nothing could be done.

  I saw the site of Windows Update program may restart the computer when the computer has not been used for some time - but the computer has been used nonstop.  The window on the reboot warning do not appear & was rather hidden under ROM burning software

  Any suggestions?  Will be Microsoft to solve this?

  It is not Microsoft.
  These are public Forums.

  Change the way you receive updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Vista offers four different methods for how Windows Update updates your computer. Below, we explain each method and when this is the recommended setting.

  Install updates automatically (recommended) - if you select this option, then all the critical updates will be automatically downloaded and installed on your computer. These updates will install at the time, you specify the fields to install new updates. This is the recommended option for the majority of people because it ensures that you have all the critical updates installed automatically on your computer.

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  Never search for updates (not recommended) - if you select this option, Vista never automatically checks updates. This option should never be selected as it puts your computer are likely to be affected, infected or hacked.

  Choose one of the following Options:

  Download updates but let me choose whether to install them

  Look for updates but let me choose whether to download and install them

  Read the news and see which you prefer to use.

  See you soon.
  Mick Murphy - Microsoft partner

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• How to start, stop and restart the task

  Hi all
  Need advice on what is the right way to start, stop, and restart a Java task?
  
  I tried with Executors.newCachedThreadPool () or fixedThreadPool(), however I could not present the task once. My program crashed when I tried again the task again after a shutdownnow command()

  Tasks are designed to be run once. If you want to restart features, use a service:
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/concurrent/service.html

  Service I posted in the following thread shows how to proceed:
  Multithreading

  Use of executors is unnecessary because a Service encapsulates the management of execution threads (although you can set your own liquidator on the service if you really need). Everything you need to do is use the start of the service, cancel, restart, and reset if necessary. If you do not use the cancel method, then you must ensure that your service is properly interrupt the current to cancel it for function, as you expect.

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• stop and restart the BIOS G470 2.19 problem 40cn33ww_64

  Hi there, please kindly help me.

  I have laptop of G470, Lenovo. Core I3, 8 GB RAM, 500 GB HDD, Bios Version 2.19 (updated)

  in fact, after I have updated to version 2.19 bios I got these problem.

  When I click on stop. the disc but stops the power still running.

  When I click on restart (on battery) my laptop goes off completely

  When I click on stop (on the adapter) my laptop will reboot.

  first of all, I think that it is BONE, I have try all the BONES, but it is still the same problem.

  Please give me a solution. Thank you.

  
  

• does not display the options to stop or restart the VM - WinXP

  I have a question, the virtual machine that belongs to a pool when the user clicks to turn off the host machine, in my case Windows XP displays only the option off and don't watch not options to shut down or restart. I have no respectful GPO to this installation type in the AD. Anyone know how I can solve this problem!

  Thank you.

  
  

  
  

  Photo attached.

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

  Maybe this KB Microsoft will help you, http://support.microsoft.com/kb/303070.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Stop and restart the virtual machines in the remote server

  I need to close virtual machines running guests 4 1 ESX from a remote server (IBM System i).

  The remote server in fact control the storage used by ESX and VM OS, so I'll have to scripts running on the remote server that:

  Stop the virtual machine

  Performs maintenance

  Reboot the virtual machine

  I tried to understand the big picture of the reading discussions here, but I'm still confused.

  VMA is to provide the best way for the virtual machines of withdrawal from a script running on a remote server?

  Scripts can I use SSH to connect to the vSphere environment to run scripts or issue the command?

  Thank you.

  vCLI (really its vSphere SDK for Perl), PowerCLI, VI Java, etc are all vSphere SDK to correct and they are a of the client-side bindings different scripts and programming languages which bind to the vSphere API. When I say 'API', I mean using one of these SDK is you use the vSphere API to perform the work.

  The SDK is initiated on the remote server, this can be windows, linux, etc as long as it supports one of these boxes to tools. In general, for admins, you will use either vCLI (vSphere SDK for Perl) that supports Linux and Windows, or if you are more windows-oriented, you can use PowerCLI.

  Documentation has been referenced in my first post, please take some time the documents because they provide much more detail on the use cases for each + a lot of examples with orders. Yet once, there no involved SSH if you use the vSphere API. As I told, vMA is a virtual appliance, you can download and start using if you do not want to install vCLI or PowerCLI on a remote system, this is assuming that you are comfortable in a Linux environment. If you're not, then I highly recommend using PowerCLI, who will need a remote server for Windows.

  Here are a few started getting additional resources:

  vSphere SDK for Perl + vMA:

  Getting started with vSphere SDK for Perl

  Introduction to the vMA (tips/tricks)

  PowerCLI:

  http://www.VMware.com/support/developer/windowstoolkit/

  http://www.virtu-al.NET/2009/11/10/PowerCLI-where-do-i-start/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• When I close firefox I get the message to stop or restart the script chrome://browser/content/sanitize.js:135

  Pop - up when I close firefox, it very often

  Which may be caused by disabling cookies via "clear recent history".

  • https://support.Mozilla.org/KB/clear+recent+history
  • Firefox/tools > Options > privacy > Firefox will be: "Use the custom settings for history" > [X] clear history of Firefox closing > settings
  • Firefox > history > clear recent history or tools > clear recent history

  If you use "Clear recent history" to clear Firefox cookies also tries to clear cookies from plugins like Flash (LSO), and then starts a process plugin-container for each plug-in, and which can add extra time and can cause a script error does not appear.
  
  Make sure that all plugins are up-to-date.

  Exclude cookies from "Clear recent history" to see if that helps.
  
  Allow all cookies expire when you close Firefox to delete unwanted cookies and keep those with an exception permit.
  
  Make sure that you do not erase the "Site preferences" because that will remove all exceptions.

  • Tools > Options > privacy > Cookies: "Keep until the": "closing of Firefox".

• W7 - Windows stop at 15%, stop/start pc update and cancel the update automatically before restarting the computer properly

  I recently bought an asus UL30A with W7. Since December, the system tries to install an update, stop installing at 15%, stop and restart the PC and automatically cancels the update, stop the pc again and restarts correctly. Watch the status of Update window, I've not opened updates, message,... all previous udpdates have been correctly installed.
  I tried a system restore by selecting various old success to restore update, but I have not one mentioning an error message that it cannot restore the system.
  Thank you for your help

  Hello

  References to Vista also apply to Windows 7.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.