Impossible to turn on the firewall

Similar Questions

• Satellite P10-504 - impossible to turn on the firewall

  Hi friends,

  I m unable to turn on my firewall, I get the widows message cannot start the firewall/internet connection sharing ics service. I have the Satellite P10 504 with WXP SP3.

  All ideas welcome

  Thank you
  Colin

  There are a few articles Microsoft Knowledge on this problem:

  [Some administrative of the Windows XP Security Guide templates can prevent you from starting the Windows Firewall service in Windows XP Service Pack 2: http://support.microsoft.com/kb/892199]

  [You cannot start the Windows Firewall service in Windows XP SP2: http://support.microsoft.com/kb/920074]

  Check both maybe you could solve using the workaround solution described in the present statutes

  Good luck

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• Impossible to turn on the Windows Firewall, get 0x8007042c error code

  Do not let me turn on the firewall... code 0x8007042c error... How can I get rid of the error?

  Not so much because of the error code, but because your system is probably infected with malicious rogue security software, while your genuine Norton Security program has been completely disabled and is therefore more actively protects you.

  New malware secretly uninstall your Antivirus and then takes its place

  Since your security protection comes through Norton, you should seek the help of Norton in his withdrawal.  This infection can are delivered with a rootkit, and guiding the help of Norton or a malware removal Forum would be appropriate in these circumstances.

• I am unable to turn on the firewall on the computer.

  I am informed that my safety is controlled by .policy windows group, which has never they are.they stop turn on the firewall, as it is a private machine, .and I am the administrater. No outside person must have control of my safety. I understand there is a way to regain control. Please

  Help. Roy Barton

  Original title: my firewall is blocked by group policy, how can we turn it on please don't declare the obvious ive tried that.

  Hi Roy,

  Please contact the Microsoft Community.

  You can not turn on the Windows Firewall on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what exactly happens when you enable the Windows Firewall?

  (2) what is the antivirus installed on the computer?

  (3) where are informed that security is controlled by group policy? What is the full error message in this respect?

  (4) what is the version of Windows installed on the computer?

  (5) did you do changes on the computer before the show?

  I would like more information about the issue.

   

  Assuming that you are running Windows 7 on the computer, I could suggest some common troubleshooting steps.

  Method 1-

  I wish that you are running the fixit-

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

   

   

  Method 2-

   

   

  I recommend you to perform a clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

   

  Now try to turn on the firewall.

   

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

   

   

• I get this error while turning on the firewall manually ": {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{4026492F-2F69-46B8-B9BF-5654FCO7E423}" "."

  I get this error while turning on the firewall manually

  Here are a few steps to try troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows7/cant-connect-to-a-network

  If those who do not work, let us know exactly what is happening and when.
  B Eddie

• Cannot install updates or turn on the firewall. Need help please

  I have Windows Vista Home Premium 32 bit service pack 2 and I'm unable to install the updates, this is the case since December 2011.  I received the error code 80096001. I tried to run the Fix - It, but it does nothing.  Help, please!  Also, I can't turn on the firewall.  I scanned for malware with Security Essentials, Malwarebytes, and none is found.

  Thank you, but who has not helped either, so I finally had to use Recovery Manager to wipe the drive and reinstall Vista again. So far so good.

• cannot turn on the firewall in windows vista

  I went to the control panel to turn on the firewall, but a screen will appear that says: "due to a problem not identified, windows cannot display the firewall settings."  When I click on parameter update now a screen said, "firewall Windows was unable to make the requested updates".  Any ideas on how to proceed from here?

  Hello

  You can run this fix:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

• XP will not let me turn on the firewall

  I try to turn on the firewall, but it doesn't allow me to do. I have McAfee and AVG installed on my XP.

  Uninstall McAfee or AVG.

  With more that ONE AV installed may cause system hangs, freeze and strange behavior of the system.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  McAfee removal Tool

  For your XP questions:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to turn on the firewall on the primary domain controller (AD)

  Once I deployed AD and ADC (additional domain controller) for a single client. It worked well for 4 months. But now I sudddenly has received a call from the customer that the firewall of its DC broke down and could turn on the firewall. He said something like "error 1068: the dependency service or group could start" when I try to turn on the windows firewall. It's mission critical servers and quick responses are welcome.

  Hi Darpandeep,

  The question you have posted is related to the management of the Windows network and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps.

• Windows did an update yesterday since so I will no longer post on my site without turn off the firewall in microsoft security databases.

  I use Netobjects 12 on Windows 7 with Virgin Media, all other programs work correctly, including Filezilla. I checked that NetObjects is one of the programs that are allowed to access the internet. If I turn off the firewall in MSE, everything works perfectly. I've tried it on two different sites, nothing helps. Any ideas people? Terry

  Hello

  We need to know what update causes this problem. I suggest that you want to run System Restore before the update will install and install all the updated manually and see update is causing the problem.

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
   
  Once you are done with this, manually install the update and check with the question.
   
   
   
  I hope this helps.
   
  
   

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• McAfee Firewall will stay not on; Cannot turn on the firewall of Windows 7; Computer keeps restarting; and I can't access a file because my computer says I don't have permission

  I use McAfee Firewall as my firewall.  Now when I try to turn it on, it continues for less than a second, then turns off.  Firewall Windows also not be.

  My computer rebooting in itself guard so I can't complete a virus scan.  In one place, he suggested I have try in Safe Mode, but it didn't work (and he told me that it did not work because I couldn't connect to the internet).  I tried "Safe Mode with networking" and he would not even let me scan.

  Another thing, the last time that I tried to scan it got stuck on "Internet C:\Windows\SysWOW64A\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary / / Desktop.ini.  This makes me think that this could be the problem, so I tried to get him to put the file in "VirusTotal.  I was able to get to him before that I got the idea to put it in "VirusTotal" but now it won't let me and he says:

  "You don't have currently not allowed to access this folder."

  "Click Conitnue to have permanent access to this folder."

  When I try to click on "Continue", it only ever through.

  I tried to change the 'Owner' under 'Security' tab but it still doesn't work, so I can't check to see if the file is a virus.

  Should I try to download a new antivirus program to scan my computer?

  Sorry if this is in the wrong category.  I have so many problems, it is not easy to categorize.

  Uninstalling McAfee completely.

  Do not use any product that claims to make your computer run better.  Almost all of them are either false, themselves, an infection, or put your computer at risk. Delete everything that claims to be there to prevent the infections or pretends to make your computer work better, except for the singular than an antivirus product.

  It is a controversial topic, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I pick up after about 150 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.  My clients rarely know infections.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on most of these PCs to date and has never been a problem, and it has been on a course of about 11 months now...  It is a better product than Norton.  It is also cheap. One of the things I love the most about it, is the silence and discretion.  Especially if silenced you its function "portfolio".

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that other components of these products (other than the AV itself) IS causing more problems than any profit that they bring and work mainly by stopping the Windows component that does a very good job of this particular task still.  The problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said, this is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Please note.  You should never have more than one protection software installed.  Always make sure that you completely remove the firmware all protection before installing a new one.  That contains software that may have come preinstalled on your computer when it's new

  Totally impossible to delete most of all AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• I forgot to turn on the firewall

  After updating Adobe Flash, I forgot to re - activate my firewall. I checked it after noticing that a number of Web sites, I have visited not appeared in my web browser (Firefox). It was late, so I've re-enabled the firewall, turn off my iMac and went to bed. The next morning, I'm sending you this from my iPhone. How can I tell if there is malicious software on my iMac?

  Oh! I've also been alerted by a friend that she had an email 'me' which of course was not

  Help!

  marsue

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown. Alternatively, you can run Malwarebytes.

  Etrecheck - Information System

  10.8 Malwarebytes Anti-Malware for Mac and later versions

  What should I do if Malwarebytes Anti-Malware for Mac does not solve my problem?