Impossible to use the card on my Equium A100 reader

Similar Questions

• Impossible to use the box of favorites - a pop up appears saying unavailable location

  original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE

  Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.

  Edward Baker

  Hello

  I suggest try to reset Internet Explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

  It will be useful.

• Is the card in Satellite P100-437 reader also supports format SD HC?

  Hi all

  not sure if the card in Satellite P100-437 reader supports also format SD high capacity?

  Thank you.
  Kind regards
  teo_ost

  Post edited by: teo_ost

  Hello

  Please check this thread for your question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99339𘐋

  Welcome and good weekend

• How to use the same point of view as read only in the ADF and editable

  Hello

  How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

  -James

  Hello

  Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

  From slide 14, that's where your use case comes into play

  Frank

• Impossible to use the system in sleep or Hibernate mode after installing a new video card

  Have a card GeForce 6200 graphics with latest drivers installed and now I can't use the features of standby or Hibernate mode in Windows Xp System.

  This seems straight - Stand By and Hibernate will usually be available if the video drivers are not updated.

  For your NVIDIA GeForce card, I would do this:

  The best way to reinstall the NVIDIA software is to visit the NVIDIA support web page and let your system and to recommend the best software for your system... or you can find the correct version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  When you have done, you can add a fourth "Hibernate" button to your menu to shut down the computer to prevent you from pressing the Shift key to Hibernate (which is good for lazy people like me).

• What are the cards WiFi are Equium A60-692-compatible?

  Hi all
  I have a Toshiba Equium A60-692 (model: PSA67E-001001EN). It has a wifi, lid at the rear for a wifi card, but I can't seem to find a list of anywhere where wifi cards are compatible. Someone would be able to provide me with a list of compatible cards!

  Some people said that the Toshiba Equium A60-692 does not support a Wifi but as there is a sign for one at the back I guess that it is wifi ready! In the connectivity for the Athros Wizard, he says also there a 1394 connection, but it does not have a card.

  I found a few on ebay and I want to know if they will be compatible:

  (1) Toshiba 802. 11a / g Wireless LAN Mini PCI Card - Netzwerkkarte, Mini PCI - 802. 11 b, 802. 11A, 802. 11 g, PA3298U-1MPC

  (2) Toshiba WLAN Mini PCI PA3300U-1MPC 54 megabit 802.11 g/b

  (3) TOSHIBA WLAN MINI PCI 54 Mbps 802. 11a / b PA3273U-1MPC

  (4) Toshiba PA3300U-2MPC card WiFi Kit 802.11 g 54 Mbps NEU

  Thank you for your time and I look forward to your responses!

  Neil

  Post edited by: neilsalexander

  Hello

  If s said Atheros has a connection 1394 so I guess this means that the firewire.
  The IEEE 1394 mean the firewire connection available on this laptop.

  Anyway, the WiFi network is not available and if you want to use WLan technology on your laptop if you use the WLAN USB key. It is the simplest way to connect to the wireless LAN.

• Satellite A300: Cannot switch between programs by using the card external sound

  I want to use Notepad for recording and playback for music.
  I bought the TASCAM US - 144 d/a changer / sound card and Steinbergs Cubase LE 4.
  The driver is an ASIO for the d/a TASCAM changer.

  It can be set to a substitute of ASIO called ASIO DirectX Full Duplex Driver.

  It is not possible for me to change between the different programs, for example Windows Media Player 11, Cubase 4 or Audacity.
  The Mediaplayer Te gives the following information:
  "Ist Beim beaches der Datei in Windows Media Player ein problem aufgetreten. Klicken Sie auf "Webhilfe", um weitere zu receive support. »
  It is not possible to switch the output of the TASCAM external sound card.

  Drivers for Cubase, TASCAM and Media Player are the most recent.

  What I've done wrong? Someone at - it an idea?

  Thank you

  Hello

  Please don't be crazy about me but what I do not understand what your problem with Toshiba?
  If you use external third party product, please contact the support of manufacturers and clarify this issue.

  I mean, you'll be really lucky if anyone here uses the same wheels. Before you wait here contact manufacturer. They have the best experience with own products.

  Good luck!

• Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

  Hello

  I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
  I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

  However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

  Thank you

  Jack

  Hmm. I wonder about the 8 GB card Micro SD.
  As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
  Usually the laptop card reader s should recognize either large 4 GB microSD cards.

  However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

  See you soon

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• Possible to use the card NVIDIA via BIOS Y50-70?

  Hello

  Someone can tell me if it is possible to disable the card Intel completely and use NVIDIA directly via the BIOS?

  I try to use Nvidia Nsight to debug shaders in OpenGL, but graphics Optimus/switchable make things difficult for Nsight.At its point BIOS has just UMA and switchable graphics option. But I've seen other laptops with a discreet graphics option. Is this template hardcoded to go through the Intel card anyway? Is there any other version of BIOS that can add the option? So far, this has been just a pain and no gain.

  Thank you

  I think that it is wired to be it, but you had an option on older machines to switch it in any case.

  AFAICT, they won't add this option.

• Using the card wifi Intel N5300 T420

  First post.

  The card wifi Intel N1000 on my T420 just broken and I have a T400 sitting there for years. I wonder if I can use the wifi card in to work with T420 T400.

  The card wifi T400 Intel N5300's is a full-size PCI-e card

  The card wifi T420 is intel N1000, it is a half-size PCI-e card

  In T420, there is a position near the site of the ram to the back of the portable computer, which can operate with a PCI-e size. Is it possible to intall the Intel N5300 here? Or that there is WAN only?

  Thank you

  McDull

  It won't work.

• Can not use the card PXI controlling SCXI for something else

  Hi all

  We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.

  I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.

  I'm doing something wrong?

  Thank you.

  Dear Claudio_G,

  That should really be a limitation in VS2011 because there are future news added since VS2011.

  And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.

  Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.

  Kind regards

  Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |

• Impossible to use the creative photography of cloud

  Initially, I tried the demo version of light Hall CC which has since expired. Subsequently, I decided to buy the plan of creative photography Cloud directly from Adobe and just do the pre-paid annual subscription. Unfortunately, I am unable to use it even if I see that it's under my Adobe ID when I go to my Plans & products he said only: "you'll be able to manage this little plan" under plan Cloud creative photography (one year, paid in advance). When I try to use Lightroom, it just says: the development module is disabled if clearly the creative cloud does not seem to be updated to reflect the composition that I bought. Has anyone meet this issue before? It's really disappointing to see a business too great that Adobe would have a buying experience such shit.

  I read through multiple sections of help that doesn't fix my problems and it is impossible to find a phone number to call.

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Do you need to have the card downloaded app to be able to use the card in the wallet of Apple?

  Say I want to free up space on my phone - if I delete the app from Starbucks, my card still works when I try to pay with pouch Apple?

  It is not necessary to have installed the application. The card will work without it. The card is in the portfolio, and Starbucks scans the code in this topic. The application allows you to manage the card, add money to it, etc... You can manage their Web site on a computer map if you wish.

• Impossible to use the keys FN on my Satellite S50T-A-10Z

  H?

  I have a Toshiba Satellite S50T-A-10Z. I've recently updated the BIOS. After the update, I realized that I can not use the FN keys. And also I can't turn off my keyboard background light.

  Before the update, I was able to do by pressing on FN + z. help, please!

  Hello

  As far as I know keyboard light can be turned off in the BIOS directly. You will find this option?
  Have you tried to change function key mode in Control Panel > keyboard?
  Please try to change this mode to the standard F1 - F12 (you have to press the FN button) mode and check if the problem persists.