Improvement of the reception of the WAP54G - advice needed

Similar Questions

• HP Pavilion a6000n - improvement of the system. Need help with the decision and suggestions

  Hi all

  I have a HP Pavilion a6000n, spec even with this link , except that I have 3 GB of memory and Window Vista Home Premium 32-bit.

  I think to update some of my computer hardwares that can run more smooth in some games and to improve my gaming experience.

  I'm looking to replace the processor and graphics card.  At the present time, I have an AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2.2 and a NVIDIA Geforce 6150SE nforce 430.

  My price range is around $100-$200 for processor and graphics together.

  I looked at cela processor and graphics card

  They will make a big difference and improvement than what I have at the moment?   If this isn't the case, then can you guys give me some suggestions on the choice of the better ones out there?

  Thank you!

  You have only a 300w ATX PSU (Power Supply Unit), then you will need to update if you plan to install a good graphics card.  Check the manufacturers minimum power required for the card you decide on getting.  As for the CPU, it does not require the upgrade - the graphics card is what causes your performance problems (in the games).  I would like to spend more money on a power supply and graphics card and leave the CPU alon (so far )

  Message edited by Kalt on 05/12/2008 23:18

• How to remove a web address in the address bar drop down list? The old advice does not work. Help!

  The OLD advice for this problem, listed below, does NOT work. Web addresses just do not detach:

  1) click the arrow located on the right side of the address bar of Firefox. A list of URLS will come down.

  (2) place your cursor on the URL that you want to delete manually.

  (3) press and hold the "shift" on your keyboard. Then, press the "Del" key The URL highlighted is removed. Or I have been advised to hold the 'Ctrl' key Neither work.

  There are a few new instructions, updates on how to remove the unwanted drop web addresses. Everyone?

  Hi, if your problem is removal of the history of the site. Click on the firefox menu and go to history-> history-> click history on the left side of the window. Now you can remove unwanted Web sites from the list.
  If you want to delete bookmarks fallow the instructions remove bookmarks

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Improvement of the basic Windows 7 scores; I need desperate help

  I'm sick and tired of playing games (even 2d games) who hangs out on Windows 7 and not on any other OS.

  I've disabled aero, update drivers, adjusted the display settings and tried a million ways to improve the basis of Windows 7 scores.

  I'm stuck with a 3.1 and games is trolling like a miserable slug. Two days earlier, he jumped to 3.2 and I have seen a massive improvement in 2d games. (teas 2d games that need to run at 60 fps had prieviously ran to 20 to 35 pictures per second. After the jump for 3.2, they ran 40-50 fps)

  Well now, they decided that they wanted to jump down to 3.1 and games act as slop again. I'm starting to become extremely unfortunate to have a Windows 7.

  Help would be greatly appreciated.

  Hi Smbmater99,

  Have you tried to optimize the performance of the operating system?
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I had similar problems while trying to play games like NFS, HALO 2 for Vista.
  I could solve the problem of cleaning residue from register of older programs that I have not used or removed and the temp. locations.

  You can also try to give it a shot.
  http://www.RegCure.com/
  http://www.Piriform.com/CCleaner
   Note: do not forget to take before cleaning the residue of backup (when prompted).

  After cleaning the computer, try to re - evaluate the Windows experience index.

  Concerning
  Terminator

• Transmitting the power of version 3.1 of the WAP54G

  Hello

  someone at - it known the transmitting power (in mw) of version 3.1 of the WAP54G?

  Thank you.

  This is the firmware part only third I know for the WAP54G V3.x with the function you're looking for without a lot of other useless to play. Simply go to advanced wireless settings, select the power and configuration of the antenna and your done.

  Note: The maximum power output is 84mw, and change it to any value that has no effect. Something like netstumbler to measure the new signal at the level of the customer in order to give you an idea on the comparative difference in signal.

  Concerning

  Fred

• Improvements to the sample gears

  improvements to the new sample of waterfalls 10.3 gears

  https://github.com/BlackBerry/Cascades-samples/tree/master/gears

  My commit:

  https://github.com/EKKE/Cascades-samples/commit/02051efc6dd5e02e61f63fb491d4b03f5d87ecbf

  Unfortunately realized that long ago I did a fork of a forj of waterfalls-samples, so I couldn't create a request from github

  With the help of my code changes:

  * you don't need a button to recenter

  * focus has been after that Page was created by a discipline QTimer

  * FocusRetentionPolicy.LoseToFocusable fixed gear container

  Now you can automatically drag after starting the application

  AND you do not lose the focus it by tapping on the screen

  @Mark Sohm: maybe the developer can insert this?

  Hey God, I made a request to draw for you. I was in the same boat with an old fork, but if you delete, then re-fork the repo, it seems to work without any problems connecting your local repo to the GitHub fork.

• Someone please send me the seo advice?

  Someone please send me the seo advice?

  If you want to increase your positioning on Google, then keep your website updated with valuable information.  Other people link to your site and your ranking Google will increase.  In addition, ensure that your site's metadata has good keywords and your home page says who you are and what you do.  See this: http://support.google.com/webmasters/bin/answer.py?hl=en&answer=35769

  If Google never detects you are trying to artificially increase your ranking, they will withdraw their index completely.

• How always show the toolbar of the improvements in the latest version of Windows Media Player?

  I made the switch from XP to Win7 64 bit and I would like to get WMP to behave like the previous version where the playback speed settings were still visible after the opening of WMP. I can't figure out how to activate this visibility option in the latest version. In the current version, I have to open the menu of upgrades, select the toolbar, and then rearrange on the screen to make it visible, and then set the speed.

  Clues on how to solve this problem so that I see the toolbar automatically everytime I open the program? Thank you.

  Hi usp.

  I'm afraid to say that you shouldn't find this option open by default as it was in previous versions of Windows Media Player. And there is no work around to get its default opening because it's by the architecture of the software.
   
  However there is an improvement in the same, instead of the default toolbar that we had previously we an arrow below the now playing tab where you can navigate in the development option.
  Here's how:
  1. start the playback of a file.
  2. click on the arrow on the tab playing, point to enhancements, and then click play speed settings.
  3. move the speed slider play on the speed at which you want to read the content, or click the slow, Normal or fast.
  4. to select speeds between the speeds of game marked, in the enhancements pane, clear the cursor Snap box common speeds.
  5. to hide the settings, click Close in the enhancements pane.

  For more information you can check the items below:
  http://Windows.Microsoft.com/en-us/Windows7/change-playback-speed-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Player

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• There is a special offer for the improvement of the CS6 CC?

  There is a special offer for the improvement of the CS6 CC?

  Used to be, but it expired months ago.

  Now you simply subscribe to the plan that you want for the price advertised.

• Improvement of the system: need page file, SSD install tips, etc. Win7 i7 generation

  Gents, it's been 4 years since I built my i7 LGA1155 based system and I have to type of upgrade (sh! t happens). It is not a full upgrade. I don't have enough green to buy a new vid card and am carrying on my storage drive.

  I bought a Samsung 850 Pro 256 GB SSD for my OS. The MB is an ASUS Z97 WiFi ac USB3.1 running a 4 GHz i7. The Z97 has Intel and ASMedia ports.

  
  

  My current configuration has a 120 GB for Win7, two Samsung Spinpoints SSD in RAID 0 as my D drive (my scratch disk, which has worked perfectly) and two WD black 1 TB in a RAID mirror as my E drive where I put all my videos, audio files (mirror raid because I'm insanely paranoid). I have also now a 2 TB backup Synology (external) so that the internal working paper mirror will not be necessary.
  

  
  

  So my setup will be:

  C drive: a single SSD with Windows 7

  D drive: two Samsungs in a RAID 0 (as I have now - although I will buy a large SSD on the road)

  E drive: WD Black (no more than mirror)

  Then readers of DVD and BD.

  I'm using CS5 Production Premium. That's what I have. I will not be able to level up to the end of this year or early next. Updates are no longer available normally, but apparently I can download a significant update to Adobe file and use it to manually update the CS5. I don't have this info right now (I think it is called "mul PremiereProTrial 5.0.3 Adobe UPDATE").

  
  

  It's been so long that I have installed Windows 7 (and I had my favorites on the subject so many links is now dead) I ask some advice on some details.

  My Windows 7 doesn't is selling at retail, but from 2011 so no SP1. I have already downloaded all the updates via WSUS Offline if I can do a proper update once installed Win7. This will be my first time through this method, but people swear by him.

  I know that my older Win7 installation CD will not see the new SSD, so I download the drivers for the SSD and also for my Intel and ASMedia SATA on the Z97 MB ports. I'm still not sure of exactly how this will go.

  A question I have is with the page file. I think that Windows automatically detect it on the operating system drive.

  I should he move to the D drive? I don't want to do anything that could cause me pain. My page file has always been on my C drive (if the memories are good).

  All the tips on this point and in my build system are greatly appreciated. I had so many links is dead now, so I'll try to find what I need. For example, what codecs I should download and install.

  By the way, I'm now change anything over 2 K. It is usually footage DSL, HDCAM stuff, as well as lot of Super8 who was captured 1080 p from QuickTime or ProRes files.

  for the pagefile, advice to move out of the ssd. It was at the time where the ssd did not last very long and it was an attempt to give them a longer life expectancy. now ssd last much longer is allowed to place the pagefile on ssd. When it comes to the filename of the page, you want it on a fast reader. the more memory you have at least windows will have to exchange information in RAM to the paging file. so if you have enough ram, the swap file usage will be less to reduce the wear and tear on any drive.

  codecs must be installed if used as a keeping clutter out of windows. most install quicktime for prores and dnxhd/r codec.

  Apple - QuickTime - Download and watch videos, movies, and shows.

  Avid QuickTime Codecs THE

  for windows 7, you may need to install the card drivers mother sata during the installation of windows 7, so that it can find your disks. someone asked on win7 install recently here: new construction, asking for Windows 7 install tips before you start

  There are a lot of youtube and the windows installation guides 7 online.

• EM12c, improvement of the system of two - Questions about the post-installation steps

  Hi DBA:
  I use two system of EM11.1 process and have updated the SGD. Immediately after the set SGD to level, I went three agents. The agents take on a cluster. I have completed the tasks of post-upgrade deferred Data Migration and the Migration of the accumulated data. Finally, I registered offshore on migration for these three agents and everything seems * fine. My question:
  
  I spent a second set of officers who support another cluster. Is it true that each migrated agent calls for a fresh run of deferred employment data Migration and Migration of the accumulated data?
  
  Thank you
  
  Laura Sallwasser

  Yes, as and when you put agents in batches of the accumulated data Migration task is triggered. To better understand this concept:

  in the approach to upgrade 2-System, you can choose to spend your Management Agents in phases. When a set of Management Agents are passed to the, they start to download data on their hosts and their targets in the improved management repository, while those who are not switched yet, continue to download data from their hosts and the former repository of management targets. Therefore, earlier versions of the Management Agents coexist with those upgraded when only some of them have passed, and in such circumstances, the data are transferred to the former repository of management as well as the other at some point. However, note that a Management Agent only represents a host at some point, so coexistence does not two Agents of management on the same host. It shows only an earlier version of the Management Agent followed by a crowd who cohabits with a upgraded Management Agent, followed by another host.

  When you swtich in the next series of Management Agents in the next phase, although they start to load data into the repository of improved management, the data downloaded to the old management repository before be toggled continue to exist in the repository of the old management.

• Hi - my Mu was "buggy" and update not - so I threw the APP in the trash - but now CC won't allow me to re - install because he thinks that I already have the APP - advice?

  Hi - my Mu was "buggy" and update not - so I threw the APP in the trash - but now CC won't allow me to re - install because he thinks that I already have the APP - advice?

  restore your application from the Recycle Bin, and then uninstall correctly.

  If this fails, CC Office lists the applications as "up to date" when it is not installed

• So far, no improvement in the protection against Spam

  Seeing no improvement with the anti-spam protection so far in Blog comments, despite the new BC update from yesterday that started the Akismet anti-spam protection.  Just after the update, I reset my settings in the comments to require comment approval and the new anti-spam Protection setting, and then spent a LOT of time marking nearly 800 previous comments submitted over the past months as Spam.

  But yesterday and continues today, my blogs are always getting hit with the same amount of spam as in the past, and of course, it's the same pirates who have sent such things throughout: PayDay loans etc.

  For the record, there must be a robot submitting this spam because on my comment form I do not display the Web site field so that humans can not complete (because they do not) but still it's fill, so it must be a robot with that sort of thing that reads HTML and ignorning flow my CSS display : none on the domain of the Web site.

  Frustrating... hoping that something will improve because all my customer sites are also infected by spam... customer feedback for me that they are concerned that the middle of BC is not safe and they worry about maintaining security of transaction as well as the result all the spamming.

  Hi all

  We just released the new spam protection features.

  I also created a doc on this forum explaining best practices on how to avoid SPAM:http://forums.adobe.com/docs/DOC-2882

  All comments are welcome.

  Dragos M.

• improvement of the performance.

  Hello expert,
  
  I have a statement below, the plan of the explain command showed using search for the complete execution of the table, what can I improve using the index (index have already here), appreciate.
  
  Select
  pp.policy_premium_pk,
  pp.policy_fk,
  pp.policy_term_fk,
  pp.risk_fk,
  pp.coverage_fk,
  pp.transaction_log_fk,
  pp.coverage_component_code,
  hiroc_rpt_user.hiroc_get_delta_amount (pp.policy_fk, pp.policy_term_fk, pp.risk_fk, pp.coverage_fk, pp.transaction_log_fk,
  pp.coverage_component_code),
  pp.rate_period_from_date
  proddw_mart.rmv_policy_premium pp
  where pp.rate_period_type_code = 'TERM_COVG. '
  and pp.coverage_component_code <>'NETPREM '.
  Pp.policy_premium_pk group,
  pp.policy_premium_pk,
  pp.policy_fk,
  pp.policy_term_fk,
  pp.risk_fk,
  pp.coverage_fk,
  pp.transaction_log_fk,
  pp.coverage_component_code,
  pp.rate_period_from_date
  
  the execution plan is the following:
  
  OPERATING OPTIONS OBJECT_NAME POSITION
  SELECT THE 35 396 DECLARATION
  HASH GROUP BY 1
  MAT_VIEW FULL RMV_POLICY_PREMIUM ACCESS 1

  Hello

  It is likely that the index is not used because the query returns a volume of data that allows access to an ineffective index. To access the rows of 3.5 m of data should take minutes, not hours with a full table scan, so I don't think that access to the table is the question.

  I suggest that you run a trace of your session and then use TKPROF to analyze the trace file. I bet you will find that the function call contains the SQL statements that are responsible for the majority of your time.

  Just because a query uses an index and runs quickly does not mean that each query must use an index to run quickly.

  David

  PS You can quickly verify that the function is the source of the problem by removing the SQL statement and then run the new statement.

  Published by: David Tyler June 24, 2011 16:21