In 11g default Audit policy

Similar Questions

• Server 2008 R2 GPO do not update Windows 7 security policy - Audit policy

  I have an old Server 2008 R2 Standard (SP-1) 64 and 25 workstations Windows 7 64,.

  On the server I have Group Policy Management, default domain policy, Computer Configuration, Windows configuration, security, local policies, Audit policy, all parameters together for the pass/fail (account, directory, logon, object, Prov., etc, etc, etc.) cela fine checks at the server level.  GPMC looks good, resulting strategy game is good with the default domain policy in all areas.

  25 workstations become the settings of the GPO server for story/password to the password policy, etc. and all other settings.

  25 workstations do not receive local Audit policy success/failure as the server, all the "Auditing No." and not able to allow to manually set or get updates from the Server GPO, not the gpupdate/force.

  When done desktop computers get their information to audit of Server 2008 GPO, I thought that this came from default DC GPO for the audit

  Thank you

  B.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• ASA political anyconnect and default group policy

  Hello world

  ASA is configured with anyconnect tunnel group and anyconnect group policy.

  AnyConnect group policy for

  in ASDM to allow concurrent connections box inherit

  timeout in ASDM watch checkmark on inherit

  By default of exhibitions in political group or system default

  simultaneous connections show 3

  timeout idlle shows 30 mins

  Need to understand that when we create anyconnect group policy and we click on inherit means it will take the value of this field of

  default group policy?

  As above default group policy also indicates that it has simultaneous connections for 3 and if I change to 2 concurrent connections in anyconnect group policy

  then the Group anyconnect policy will take precedence over the default group policy?

  The default system policy also shows idle time-out of 30 minutes that means it disconnects the anyconnect session after 30 minutes?

  Concerning

  Mahesh

  You're right about the strategy of group by default. If you assign a simultaneous connection of different to your group policy for the anyconnect profile these settings will override default group policy. Any changes of setting that explicitly to any group policy on the system replaces what has configured the default group policy.

• Disable the default ISAKMP policy?

  Y at - there no way to disable or change the default ISAKMP policy?  I created the number 20 of the police, which is used in a VPN site-to site in vain for a quarterly PCI analysis the results come back in due to stage successful 1 authentication with encryption DES/DH768.  I reproduce these results with the help of ike-scan with explicit parameters OF/DH768.

  This is a 2600 router and I just upgraded to 12.4 IOS (23) because I came across (http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html) Cisco documentation which says that 12.4 (20) introduced the "no crypto isakmp default policy" - but I do not see this command still available to me.  Here are the results of sh crypto isakmp policy:

  Priority protection suite 20

  encryption algorithm: three key triple a

  hash algorithm: Secure Hash Standard

  authentication method: pre-shared Key

  Diffie-Hellman group: #2 (1024 bits)

  lifetime: 86400 seconds, no volume limit

  Default protection suite

  encryption algorithm: - Data Encryption STANDARD (56-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: Rivest-Shamir-Adleman Signature

  Diffie-Hellman group: #1 (768 bits)

  lifetime: 86400 seconds, no volume limit

  Any help would be greatly appreciated!

  Hello Anthony,.

  I saw the link you provided.  It seems that this command was introduced in12.4 (20), T... note the T.  This indicates that it is only in the T-train train or technology and only seen in some other 12.4 T code or the train from 15.x newert.

  You say that your router is runnign 12.4 (23) implicitly code Mainline (M).

  The last T code for 2600 seems to be a 12.4 (15) T, so it does seem that you can enable this feature in order to disable the default policies.  It also seems that the 2600 series retired as no new code is released March 27, 2010.

  http://www.Cisco.com/en/us/products/HW/routers/ps259/prod_eol_notices_list.html

  Looks like you can be out of luck and may need to look for in buying a newer model router to get the newest software support and the ability to disable the default isakmp suite.

  Of course, it is noted that while they can establish a session ISKMP, however, they will really be authenticated by the router in message MM 5 as most people use internal cases for certificates on the VPN.

  I hope this helps.

  Kind regards

  Craig

• 11g OAM AuthZ policy

  I need help for OAM 11 g AuthZ policy.
  Looking at the authorization policy, I put it for range IPAddress, user identity and time based.
  I want to create a policy that checks an attribute see if whole or not and on this basis to allow or deny. How do I do that?

  I would watch the AuthZ constraints.

  Other than that, you could simply return a variable header for the attribute you want to toggle.

• Enterprise Manager - Oracle Forms 11g (Default.env: options)

  I have my OEM (field of forms) running, and I'm in the web configuration screen and by editing the file formsweb.cfg (default.env - section of the applet). My question is, overall, is there a LIST of the options available for certain areas:
  
  For example: if I want to change the default value for "lookAndFeel" of 'Oracle' to something else, what are the options should I? It is the same for all the other areas (e.g., splashScreen, logo, colorScheme). Is there a LOV by field? I don't know what I can put in the game there or less around with, and yes I have search online documentation but can't find anything as well as research on the Forums.
  
  I'm under Oracle Enterprise Manager 11 g FusionMiddleware control 11.1.1.2.0, connection to the database to Oracle 11 g on RHEL (Red Hat Enterprise Linux) version 5.

  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/e10240/configure.htm#i1009726

  look at table 4-12

• Domain policy by default in all of reception through Site to SIte VPN WAN

  We have a field of forrest with subdomains under it.  We have three subdomains.  All are different places and each site connects to the other with a VPN over WAN.  We have a WSUS server that is on the field T.  We have customers on all three areas, field T, S domain and domain CR.   All three areas can consult and get updates from the WSUS server in the T field.

  The problem is if the computer has been configured to the area S originally, and now the same computer and the user are field t, S domain computer can't get the default domain policy that it redirects to the WSUS server to domain T.

  We have about 15 computers that have the same problem.

  How can I do for this troubleshooting.  Why would he not the domain policy by default when the user connects.  When you perform a gpresult is always the local policy.  Never the default domain policy.

  You will find appropriate in the specific WSUS forum support: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

• How to disable the default ISAKMP on Cisco 2800 router policy

  I'll have a check point asking me to disable or delete the policy by default ISAKMP on my router. I tried to do, but I got an error that the command is not supported as below:

  

  If this is not possible on my router that has a version of IOS:

  

  So, is it possible to upgrade my router IOS to the latest version to solve this problem, which is:

  "c2800nm-advsecurityk9 - mz.151 - 4.M6.

  If that does not solve my problem, I have an official document from CISCO, which on my router, which is not supported "Disabling the default ISAKMP policy.

  I would really appreciate your reply guys.

  Thanks in advance,

  Hi Ebrahim,

  Version 15.1 (4) M6 supported by the command "no default crypto isakmp policy."

  Before you run 'no default crypto isakmp policy. "

  :

  Router #sh cry default isakmp policy

  IKE default policy

  Default priority protection suite 65507

  encryption algorithm: AES - Advanced Encryption Standard (128-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: Rivest-Shamir-Adleman Signature

  Diffie-Hellman group: #5 (1536 bit)

  lifetime: 86400 seconds, no volume limit

  Default priority protection suite 65508

  encryption algorithm: AES - Advanced Encryption Standard (128-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: pre-shared Key

  Diffie-Hellman group: #5 (1536 bit)

  lifetime: 86400 seconds, no volume limit

  .

  .

  .skipped output

  After:

  Router (config) #no cry isakmp policy default

  default router #sh policy cry isakmp

  Router #sh crying political isa

  World IKE policy

  *****

  If you are upgrading, you should be ale to delete default isakmp policy.

  Thank you

  Shakur

• Error message - "Could not create the security default policy"

  I just reinstalled Acrobat X on a new computer (upgrade to Acrobat 8).  Now, when I open a file in Acrobat X, I get a message error that says "could not create the default security policy."   How can I fix? Pourrait

  Hi dawlaw,

  There is a bug in Adobe software. Acrobat X pro and standard both install properly if any other Adobe product was already installed, but both disrupts the installation (do not create the AppData\Security subdirectories) if another product from Adobe that has not created AppData\Security directories has been installed first. Adobe has only been tested installation on machines that never had other Adobe products installed. They do not consider that other Adobe products can already installed.

  (Alternative 1 (safer) - (a) uninstall all Adobe control panel products, b) then delete (or rename) the directories \AppData\Local\Adobe and \AppData\LocalLow\Adobe \AppData\Roaming\Adobe - Adobe never cleans these directories after uninstall. (c) make an own Acrobat x pro or standard installation before you reinstall any other Adobe product.

  Solution 2 - copy \AppData\Local\Adobe\Acrobat\10.0\Security and \AppData\LocalLow\Adobe\Acrobat\10.0\Security from another machine that works.

  Kind regards

  Nicos

• The educational issue: by default the level of auditing

  Hi all
  
  I just want to confirm that the following about the value default audit level settings.
  
  #None: no auditing information is recorded at run time.
  #Statistics: statistical audit information is registered at run time.
  #Error details: error information and statistical audit information is registered at run time.
  
  
  What kind of error message I'd get if I put level checking by default to none or statistics if the mapping fails? (something like error ORA only? error ora and the number of recordings?)
  
  Thank you
  Sebastian

  Hi Sebastian

  When no audit is enabled...

  Remember that the maximum number of errors is important in general. The default is 50. If you run an insert statement that fails with an error like ' ORA-12899: value too large for column ' an error is reported, if the maximum number of errors is 50, the mapping will end with the OK_WITH_WARNINGS State (since the number of errors is less than the maximum). Maximum number of errors is it TI 0, mapping ends with State FAILURE. There is pretty much no other investigation. You can enable DML error logging and railroad DML errors in this way if all the stars were aligned with the modes of instruction, etc..

  See you soon
  David

• Unified_Audit_Trail fails to audit connection failures

  Hi all

  Oracle DB EE version 12.1.0.2.

  I have activated Unified_Auditing (pure Mode) on the database and the default policy that ora_logon_failures is enabled.

  We have pooled set up and use the view unified_audit_trail / sys.cdb_unified_audit_trail.

  I see no record of success / failure of connections. I tried to rebuild politics nothing helps.

  Of the clues as to what I can do to solve the problems? I have MOS SR open, but looking for a faster solution.

  Thanks in advance.

  -RR

  Here is some info of parameters:

  CHOOSE the VALUE OF V$ OPTION WHERE PARAMETER = "unified audit."

  VALUE

  ----------------------------------------------------------------

  TRUE

  display the parameter audit_trail

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  AUDIT_TRAIL NONE string

  -DBMS_AUDIT_MGMT. AUDIT_TRAIL_IMMEDIATE_WRITE

  -Select POLICY_NAME, AUDIT_OPTION, AUDIT_CONDITION, COMMUNE of AUDIT_UNIFIED_POLICIES where policy_name = "ORA_LOGON_FAILURES";

  POLICY_NAME AUDIT_OPTION AUDIT_CONDITION COM

  ---------------------------------------- ---------------------------------------- ---------------------------------------- ---

  ORA_LOGON_FAILURES CONNECT NO YES

  -Recreate the policy:

  CREATE AUDIT POLICY ORA_LOGON_FAILURES LOGON ACTIONS;

  -Select * from AUDIT_UNIFIED_ENABLED_POLICIES;

  USER_NAME POLICY_NAME ENABLED_ SUCCESSES FAILURES

  ---------------------------------------- ----------------------------------------                                    --------      ---                ---

  ALL USERS ORA_LOGON_FAILURES BY YES YES

  Looks like it's a bug...

  Unified Audit trail - log Action not captured (Doc ID 1940793.1)

  BUG: 19383839 - no UNIFIED AUDIT - NO logon OR FAILURE of logon ACTION CAPTURED

• How can I change the default setting of font size and type when using e-mail?

  When sending an email, I have a default setting of the Arial font to 10 points. If I change what it comes down to Arial next time I use it. I don't know how to change the default setting.

  Hi Robin,

  What e-mail program you are using (name and version)? Windows Mail, Windows Live Mail, Outlook, a program that you access through your browser (and if yes, what name and version of the browser?) something else (and what version and/or year of this product)?

  What Version of Vista you are using (for example, 32-bit Vista Home Premium SP2 or other)?

  Thank you!

  P.S. I am pretty sure that the procedure is simple and can be done-, but it varies depending on whether you use, so I want to provide the information that is applicable to you.

  **********************************************************

  EDIT: Just a few alternatives which may help:

  If Windows Mail, go to Tools / Options / compose / font settings (ditto for fonts Signature if you use signatures) and change it to anything you want.  Save the changes and close Windows Mail, and then reopen it.  Your default sending policy should now be what you set with this configuration.

  ************************

  If Windows Live Mail, this MVP following is courtesy of Michael Santovec,:

  "You use the Windows Live Mail (WLM) installed on your PC or the.
  Hotmail/Live.com Web site?  If in case of doubt, by reading an e-mail message has
  Help (ALT + H).  If the help pop-up menu and the last item will say 'on '.
  Microsoft Windows Live Mail"you use the WLM (2008/2009) program.  If she
  'About Internet Explorer', says, you use the Web site.  If the House of Ribbon
  Select instead of the Help menu, you are probably using the version of WLM 2011.  TO
  check the selection ALT + F, about.

  For questions of Hotmail (Hotmail.com/Live.com/MSN.com), use these forums
  (Including the use of the website of Hotmail and Hotmail account problems)

  http://windowslivehelp.com/product.aspx?ProductID=1

  Set the default font for new messages - only applies to messages in HTML format

  -WLM-2008/2009: tools (ALT + T), Options, dial
  "- WLM 2011: ALT + F, Options, Mail, compose.

• Why is group policy does not apply to certain customers in an appropriate way?

  It is a weird problem that I need help to find.

  I have especially windows 7 32-bit and 64-bit client workstations.

  PDC is Windows 2008 R2

  The SDC is R2 2012 Windows

  SDC has (supposedly) console, WSUS and IIS installed and configured correctly.

  Default domain policy had automatic updates set to disabled. I activated the strategy.

  I ran gpupdate/force on the faulty computers who won't get to the console.

  Computers refuse to appear. The windows day newspaper showed that the AU has been disabled by policy.

  I run gpresult /h and configure the automatic updates is disabled in the default domain policy.

  Both the AD and versions of Sysvol on the match from the customer to the top with AD and Sysvol on the servers.

  The client can communicate with the PDC, very well. The default domain policy is the GPO winner according to gpresult.

  What is the problem? I can publish newspapers or gpresults if necessary.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron

• LSA lsass.exe access attempts and get an error of 4674 audit. What he tries to do?

  I have auditing enabled by govt requirements.  It includes the successes and failures of access to objects.  I get the error of the object.  Don't know what looking for LSA and why or what can be done to mitigate the error.  If I try the advanced verification of changes, it resets all other default auditing settings.  Is not acceptable.

  Hello Gene,
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Community forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Windows 7 IT pro forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home