In "internet information services"! which of these need or must be checked ON?

Similar Questions

• ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue.

  Trying to get SCCM 2007 deployed. However, could not succeed prechecks for Management Point. Even though I have BITs enabled from IIS in Add / Remove components. This does not seem to fix this error. I have re-installed Win2K3 to see if that solves the problem, but no luck. Google search and exhausted. Now need some answers of MS. Pas able to determine the exact reason for the BITs not detected.

  Here it is the errors

  ***********************************************************

  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not installed and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or the Setup program could not verify the remote IIS settings because IIS common components were not installed on the site server computer. ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not configured properly and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the computer site server. ConfigMgr requires BITS be installed and active in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  and below too although I sent this patch. Cable. :)

  This software update addresses several MMC errors that may occur when you run the Configuration Manager console. This update must be applied if one of the following conditions occur: Configuration Manager console stops responding when the host computer is low on available memory, display errors in context menu on the console home pages, or inconsistent after drag - move fail. More information on this update is available at: http://go.microsoft.com/fwlink/?LinkId=98349.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/configmgrgeneral/threads

• How to configure Internet Information Services (IIS) in Windows compressed Surface

  Hello

  I bought the new Tablet Surface of Windows running on the operating system Windows RT.

  I want to configure Internet Information Services (IIS) in the device Surface. So I opened "Turn windows feature on or off" in Control Panel. But this isn't the option 'Internet Information Services' list. Is it possible to configure or activate IIS on the Surface features? Please help on this application.

  Thanks in advance.

  Kind regards

  Hari.

  No, IIS hosting services are not in the RT as a consumer device, it is not intended to run IIS, or even other services, and these services are not rebuilt to run on the ARM processor.

  You could do that from the Surface pro, running the full Windows operating system.

• How to choose Internet Information Services (IIS) in Windows 7 to create and maintain the virtual directory?

  In previous versions as windows SP xp2, I know how chose the Internet information services (IIS), but how to get it from Windows 7 to create the virtual directory.

  Control Panel\Programs\Programs and Features\Turn Windows or turn off features enable IIS.

• Internet Information Services (IIS) Manager

  Error 404 need to activate the (IIS) Manager

  http://learn.IIS.NET/page.aspx/479/IIS-70-features-and-Vista-editions/

  Read the above.

  http://learn.IIS.NET/page.aspx/28/install-IIS-7-on-Windows-Vista-and-Windows-7/

  You need Vista Business, Ultimate or enterprise to have full IIS 7 on Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• OTP-S1100 does not connect to internet video service.

  Friday night, I noticed that I couldn't connect to Amazon Instant Video.  I couldn't connect to other video services as well.  I checked the system settings and I saw that the connection to the server of commissioning was not.  I did some more research and tried to place the servers DNS 8.8.8.8 and 8.8.4.4.  This change has enabled to connect successfully to the server configuration.  However, I still could not connect to the internet video service.  I would get either the message 'check' internet connection or would get not past the first stage of the three-stage login procedure.  I tried to reset the machine and initialize customizers.  Now all I'm left with is the option to refresh the internet video services which I can't because of the unit is not able to establish a connection.  I also tried to unplug the machine for about a half hour or more and then reconnect, and it did not help.  My firmware is updated also.  I even checked my router settings and enabled the respond to pings from the internet, because it seemed to help another user, but it did not help in my situation.  I have the Sony Essentials and Playstation Network accounts.  I can't connect to the PSN account because I can't access the 'account link' option on the BDP, and I can't try to separate fact and restoring links in the Essentials because account I did not either of his choice.  All other internet devices in my house are able to connect to the internet.  I can even not Amazon Instant Video on my PS3.  Any ideas?  Is there anything, I'm missing or haven't tried?  Any help would be greatly appreciated!  Thank you!

  I discovered that the device worked fine when connected to the modem directly, so I moved the combo modem/router to the location of the drive and changed over my home network so that all devices could connect and work.  Things seem to be working at the moment and hope they stay like that great!

• Can not install IIS services manager, receive message management console must be installed before installing the support. Where is the support in Vista? l; Ed; e

  Try to install the Internet Information services manager
  Received message the IIS Management Console is required.
  The Console where in Vista Home Premium?

  Thank you

  Hello

  For assistance on this issue, you can ask your question in the link below.

  http://forums.IIS.NET/

• Which drive would need a upgrade, not a clean install? Thank you

  Separated from this thread.

  Which drive would need a upgrade, not a clean install? Thank you

  Windows 7 is not free; you have to buy.

  Microsoft sells more Windows 7; Try Amazon.com.

  And Yes; This is an upgrade path. (see information below)

  @@@@@@@@@@@@@@@@@@@@@@@

  This offer is free years; long expired.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  @@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor" (you already have)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Windows vista Service pack 1 (K936330), need 25 character codes

  Try to install Windows vista Service pack 1 (K936330), need 25 character code.

  You don't need the code to install a Service Pack - what's your real problem?

  Your system shows a non-genuine notice?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• INTERNET AUTHENTICATION SERVICE RADIUS AUTHENTICATION USING

  Hi, I have problems with the same configuration. I authenticate remote users in AD using the Internet Authentication Service on windows 2003 as radius server configure the same VPN via ASA5520 profile. Please a knowledge or have the same information on this type of server configuration? Thank you very much.

  Greetings from the King.

  Elias Vucinovich.

  Have a look here.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

  Rgds

  Jorge

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch

• Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel?

  I am trying to cancel my subscription, but it keeps telling me to contact customer service which brings me to this forum. I followed the links, but then I end up where I started. Why cant I just click Cancel? Why can't I talk to someone on the phone?

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership