Internet Information Services (IIS) Manager

Similar Questions

• ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue.

  Trying to get SCCM 2007 deployed. However, could not succeed prechecks for Management Point. Even though I have BITs enabled from IIS in Add / Remove components. This does not seem to fix this error. I have re-installed Win2K3 to see if that solves the problem, but no luck. Google search and exhausted. Now need some answers of MS. Pas able to determine the exact reason for the BITs not detected.

  Here it is the errors

  ***********************************************************

  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not installed and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or the Setup program could not verify the remote IIS settings because IIS common components were not installed on the site server computer. ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not configured properly and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the computer site server. ConfigMgr requires BITS be installed and active in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  and below too although I sent this patch. Cable. :)

  This software update addresses several MMC errors that may occur when you run the Configuration Manager console. This update must be applied if one of the following conditions occur: Configuration Manager console stops responding when the host computer is low on available memory, display errors in context menu on the console home pages, or inconsistent after drag - move fail. More information on this update is available at: http://go.microsoft.com/fwlink/?LinkId=98349.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/configmgrgeneral/threads

• How to choose Internet Information Services (IIS) in Windows 7 to create and maintain the virtual directory?

  In previous versions as windows SP xp2, I know how chose the Internet information services (IIS), but how to get it from Windows 7 to create the virtual directory.

  Control Panel\Programs\Programs and Features\Turn Windows or turn off features enable IIS.

• How to configure Internet Information Services (IIS) in Windows compressed Surface

  Hello

  I bought the new Tablet Surface of Windows running on the operating system Windows RT.

  I want to configure Internet Information Services (IIS) in the device Surface. So I opened "Turn windows feature on or off" in Control Panel. But this isn't the option 'Internet Information Services' list. Is it possible to configure or activate IIS on the Surface features? Please help on this application.

  Thanks in advance.

  Kind regards

  Hari.

  No, IIS hosting services are not in the RT as a consumer device, it is not intended to run IIS, or even other services, and these services are not rebuilt to run on the ARM processor.

  You could do that from the Surface pro, running the full Windows operating system.

• In "internet information services"! which of these need or must be checked ON?

  Original title: programs and features

  There are about 40 sub-features under 'internet information services '!  which of these need or must be checked ON?

  Information Internet Service are disabled by default, and it shouldn't be necessary if you are running a Web Site/Server.

  I think that some programs also require a Web interface, in which case IIS must be installed.

  What parts are needed depend on the program in question, and you would probably get

  an error if a program required these features and that they are not installed.

  -If you check the box next to the title it will automatically activate several basic features

  for HTTP, World Wide Web and security.

  .

• Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.__Internet Information Services (IIS) _

  Hope you can help.  A member of the family got a computer for Christmas, they got Microsof Office 2007 student and Home edition 60-day trial.  When you start one of the applications he asked 25 digid product key.  Office was preinstalled on the computer therfore in the folder click DAT trial 60 days ago, but the above message appears.  Thoughts or responses would be most appreciated

  Hello
  Welcome to the Microsoft answers site

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Error service Control Manager Event Id 7026

  Service Control Manager error - the next time you start Event Id 7026 or starting system (s) failed to load: __Lbd (I see this error message in the system event viewer when connecting). The full message of MS is below.

  Details

  Product: Windows Operating System

  ID: 7026

  Source: Service Control Manager

  Version: 5.2

  Symbolic name: EVENT_BOOT_SYSTEM_DRIVERS_FAILED

  Message: The next (s) starting or starting system could not load: %1

      

  Explanation

  The specified drivers not been loaded properly. The driver is not in the expected location.

       

  User action

  Do all the following:

  Verify that the drivers are properly configured.

  Check that the computer is running the latest version of the drivers.

  Unfortunately MS did not say how to do this, just to make - not all that useful. How can I solve this exactly?  Any help will be greatly appreciated.

  Hi Bantam,

  In Event Viewer, do you think the list of specific drivers as well as the error message?

  You can follow this link to update the drivers on your computer:

  How to manage devices in Windows XP?

  Hope the helps of information.

• INTERNET AUTHENTICATION SERVICE RADIUS AUTHENTICATION USING

  Hi, I have problems with the same configuration. I authenticate remote users in AD using the Internet Authentication Service on windows 2003 as radius server configure the same VPN via ASA5520 profile. Please a knowledge or have the same information on this type of server configuration? Thank you very much.

  Greetings from the King.

  Elias Vucinovich.

  Have a look here.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

  Rgds

  Jorge

• I get 'service control manager configuration tool' popping up when I start my laptop.

  For the last month or two, I get a message that the 'service control manager configuration tool' wonder if I want to allow this program to access my hard Bank of Windows etc.  What is this & how can I get rid of him?
  Lenovo N580
  Win 8
  Thank you

  I have this for over a week but have now resolved, for me at least.

  Click on the details and see what SC. EXE tries to run.

  Mine was SC. EXE 'start SbieSvc' which is Sandboxie.

  Update this solves the problem.

  Hope this information helps.

• Getting error code = 0x8000ffff: catastrophic failure COM + internal information Services.

  {Original title: 02D4B3F1-FD88 - 11 D 1 - D 960-00805 FC79235}

  Hi, I am getting following error messages: Please advice.

  A condition occurred that indicates this COM + application is in an unstable state or does not work properly. Assertion failure: SUCCEEDED (hr) of Server Application ID: {02D4B3F1-FD88 - 11 d 1 - D 960 - 00805 FC79235} ID of Instance Application Server: {5E40DAD1-716A-4093-AFE5-EB0B8A5194E0} ServerName Application: Application of the system of the serious nature of this error has caused the end of the process. Error code = 0x8000ffff: failure catastrophic COM + internal information Services: file: f:\xpsp3\com\com1x\src\comsvcs \tracker\trksvr\trksvrimpl.cpp, line: 3000 c:\windows\system32\comsvcs.dll file version: ENU 2001.12.4414.702 shp

  Hi Joseph,.

  1. when exactly you get this error?
  2. is your computer connected to a domain?
  3. you remember to make changes to your computer before the problem?

  I suggest that you follow the steps in this article for a possible fix (if connected to a domain).
  COM +-related events may be recorded in Event Viewer when you install Windows XP Service Pack 2 and connect the computer to a domain

• Lack of Service Control Manager executable (WinService.exe)

  I get the following error during startup by the Service Control Manager:

  ********************

  Windows could not start the SCM_Service service on the Local computer.

  Error 2: The system cannot find the specified file.

  ********************

  After checking the properties I realized that the real WinService.exe is missing. It should be in C:\Windows\SysWOW64\ directory but is not there. I searched the entire subdirectory of Windows, but there is nothing there.

  ********************

  Properties of SCM_Service

  Path to the executable file:

  C:\Windows\SysWOW64\WinService.exe

  ********************

  Could someone give me an idea how to restore this file please?

  If you cannot run the SFC, then you probably have more system files missing or corrupt than just WinService.exe - but we can't really say without CFS.  I fear that some type of resettlement is eventually inevitable.

  If your hard drive is showing corrupt sectors, we should make a complete diagnosis to ensure that it went wrong (or is about to go wrong).  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  Remember to do this last system repair/upgrade procedure, you need an Installation of Windows Vista genuine disc.  A manufacturer's recovery disk will not work (it only allow you to do a clean install, which is not to preserve your settings or your programs if you can first backup and preserve your data).  That's what we have to do if you can't get your hands on a genuine disc, but it is best if you don't have that you can borrow a disk from someone somehow.  I don't know that the warranty includes replacement of an Installation of Windows Vista genuine disc if you have been issued one in the first place (unless maybe you can prove yours is defective).

  Going back to September for a restoration of the system is probably a little too - especially since we are not some that will actually solve the problem (although he often works in this case - but I don't know that I would do so far back me).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Calls of "Service Control Manager".

  Hi, I keep on receiving phone calls from people who say they are of Service Control Manager telling me that my computer's security is compromised. They are making great efforts to convince me that they are genuine, and they know my name, address (and, of course, phone number).  One this morning kept me on the phone for ages and asked to be connected to my computer to solve the problem, although she said that she would not be when I refused the white point.  When I asked a letter mailed to explain the problem, she offers, but which now grew to the point that my ID would be cancelled by Microsoft if I don't have something on the issue.  It even reminded me when I lost patience with her and hung up.

  Are these called authentic and I have a problem with my computer, or are they hoax calls?

  Hi Cathy,.

  NO, such calls are NOT authentic!  It's a scam.

  Neither Microsoft nor their partners to make unsolicited calls.

  You can read these links:

  http://blog.Malwarebytes.org/tech-support-scams/

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  http://www.howtogeek.com/180514/the-%E2%80%9Ctech-support%E2%80%9D-scammers-called-Htg-so-we-had-fun-with-them/

  See you soon

  Julia

• Service Control Manager 'Mistakes' 7001 & 7023

  Separated from this thread.

  All of the above Services are set to automatic and started, but the problem persists. In the event viewer, I get the Service Control Manager 'Mistakes' 7001 & 7023 and cannot identify what is the cause. I have turned off Homegroup and reactivated it hoping that it was the culprit, but nothing helps. My biggest problem is to track down what exactly is the cause for me the answers in EV are vague. I've done clean boots run SFC/scannow nothing helps. I also do not show NetBIOS TCP or whatever it is in the plug-and-play hidden devices in Device Manager. I have Win7x64 Hm Prem on an HP pc custom.

  Jerry Merci for your reply. Fortunately I managed to solve this problem via another site of microsoft to a position that was several years thanks "RiverWay May4th 2013" (link) http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/function-discovery-resource-publication-0x80070005/3a149bbb-4ccd-4b2c-bd88-dd642a85575e?rtAction=1433718960031 as follows:

  He said: -.

  "I was able to move beyond this error by doing two things:

  (1) open a prompt with "run as administrator" command window and run the following:

  > net localgroup administrators localservice / add

  > net localgroup administrators service / add

  (2) delete all files in the C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking folder. Some files wouldn't be deleted because they are used. I've just left alone.

  I'm not sure if step 2) was really necessary. In any case, after that, I was able to start the service Function Discovery Resource Publication . I changed the start mode of the service to "Automatic (delayed)" as others suggested.

  Hope that helps ".

  It cleared up my event viewer errors, seems when I started tinkering with homegroup settings in SCM began pestilential havoc on other parameters and which started when I googled everywhere to try to find out why when I restart my desktop computer so slow to produce icons they start white and then slowly come back to life or generate slow down my pc. Leading also to run sfc/scannow which found corrupt files but was unable to solve some of them which led to SFCFix which sets and sfc/scannow which forced me to look at in the first place of event viewer. In any case its all good now.

• 'Blackberry Internet Browsing Service' to push the service on device with BES

  Hi, expert, from this link: http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Push-registration-returns-rc-1000..., we have the Service book called 'Blackberry Internet Browsing Service' or 'BIS-B '. In service to push page, I saw that too.

  It worried me a little. Let's support our agent for device with BES with Push using the blackberry infrastructure. "Blackberry Internet Browsing Service" will still be available for the device associated with BES? If this isn't the case, it would be great forced to use infrastructure Blackberry push service.  I tesed on my device that is associated with a BES, but I'm not sure it will work for all cases. Any confirm on that?

  Pushing to BES only devices is done via the Server BES not BIS push server. This is why companies like the solution BlackBerry because they control their own devices and have the option to only allow the 3rd third party to interact with devices. Some companies allow BIS books on device of service and others not - his company policy.

• OTP-S1100 does not connect to internet video service.

  Friday night, I noticed that I couldn't connect to Amazon Instant Video.  I couldn't connect to other video services as well.  I checked the system settings and I saw that the connection to the server of commissioning was not.  I did some more research and tried to place the servers DNS 8.8.8.8 and 8.8.4.4.  This change has enabled to connect successfully to the server configuration.  However, I still could not connect to the internet video service.  I would get either the message 'check' internet connection or would get not past the first stage of the three-stage login procedure.  I tried to reset the machine and initialize customizers.  Now all I'm left with is the option to refresh the internet video services which I can't because of the unit is not able to establish a connection.  I also tried to unplug the machine for about a half hour or more and then reconnect, and it did not help.  My firmware is updated also.  I even checked my router settings and enabled the respond to pings from the internet, because it seemed to help another user, but it did not help in my situation.  I have the Sony Essentials and Playstation Network accounts.  I can't connect to the PSN account because I can't access the 'account link' option on the BDP, and I can't try to separate fact and restoring links in the Essentials because account I did not either of his choice.  All other internet devices in my house are able to connect to the internet.  I can even not Amazon Instant Video on my PS3.  Any ideas?  Is there anything, I'm missing or haven't tried?  Any help would be greatly appreciated!  Thank you!

  I discovered that the device worked fine when connected to the modem directly, so I moved the combo modem/router to the location of the drive and changed over my home network so that all devices could connect and work.  Things seem to be working at the moment and hope they stay like that great!