Remote access over Internet connection problems
I'm trying to figure out how to get remote access to work via the internet. I used to work and it works very well, but we are also on a local network. I have sent the invitation to someone and the password, but it does not connect. I tried the following:
- Computer Management / Services / connection manager (manual) remote access & routing and remote access (manual)
- Windows Firewall / allow a program... / Exceptions / Allow: Remote Assistance & routing and remote access
- Disabled Norton Firewall
I have alos got my friend to make sure that its parameters match mine. And I still have no success. Does anyone have other ideas? Alternatively, it won't work because I am trying to connect via the internet?
Hi nataar,
Welcome to Microsoft Answers Forums.
- What software do you use for remote access?
- What is the version of Windows installed on the computer?
If you use Remote Desktop connection in Windows Vista, try the procedure below
Log your PC computer with an account that has administrator privileges.
Step 1 open the start menu, right-click on "My computer" and select "Properties". A window with the options and details of the computer opens on your screen.
Step 2 go to the 'Remote' tab at the top of the window "Properties".
Step 3 check the box for the option "Allow users to connect remotely to this computer" in the section "Remote Desktop" in the Properties window.
Step 4: click on the 'Apply' button at the bottom of the window to save the changes and enable the remote desktop. Outside users will now be able to access your computer over the Internet.
Enabling remote desktop access to your computer
To activate the Office remote connections to your computer, follow these steps:
- Click Start, right-click computer, and then select Properties.
- Under tasks, click settings on the remote control and confirm the user account control prompt.
- Select allow connections from computers running any Version of remote desktop. (Version 'more safe' only works on using IPSec security, and on these networks business networks, you probably will not be allowed to change these settings in any case).
- By default, all administrator-level accounts can connect to the computer. If you want to grant remote desktop access to a limited number of users, click Select users, add, advanced, find now and then find the desired name in the search results section. Double-click it. To add another name, click Advanced and find now again.
- Click OK to close the dialog boxes.
NOTE A password must be set on a user account before the user can connect to the remote computer.
At this point, you must do two things to make sure that remote desktop has been implemented correctly:
- Click Start, Control Panel. Under Security, select allow a program through Windows Firewall and confirm the user account control prompt. On the Exceptions tab, find the Office remotely in the list of Exceptions and do not forget, that it is checked. If it isn't, check it out. On the general tab, make sure that block all incoming connections is not checked.
- Use another computer to test the remote desktop before you get involved in the Internet game. Follow the instructions in the second part of the chapter to open the desktop client remotely on another computer on your network. As the host name, type the name of the computer you just put up. Make sure that you can connect on your own local network before continuing.
Remote Desktop connection: frequently asked questions
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Messages: 4Registration date: 19/07/20090HP compaq presario F 739AU Internet connectivity problem
2010-01-13 09:53
I reinstalled windows XP Professional on my pc and since this time found that I am not able to connect to the network.
I installed the CD given by the service provider for modem and is ok, but there is a problem that the modem is not
How detected. IT shows that the Ethernet controller driver is not installed! Therefore, the modem is not detected.
Where can I find the SW necessary. I've come thro, HP Web site, but couldn't find anything useful. PL suggest that if I can get
the drivers and how to solve this problem. Anand Ketkar
NVIDIA Chipset, install and reboot select / check the option to install ONLY the Mediashield drivers_No:
-
I have an Acer Aspire One A150 Netbook with Windows XP home SP3 and I have internet connectivity problems. In my device manager, there are 5 network adapters: 2 seems to be your run of the mill Atheros wireless and Realtek PCI. those who are very good. However, the 3 Planner package miniports have the icons of exclamation mark on them. Ive tried everything I have kno how to do including trying to reinstall on the Acer site. Help?
Hi Olesauce21,
1. have you done any hardware changes or software on your computer before this problem?
2. you receive an error message when you connect to the internet?
You can follow this link & check if the problem persists:
How to solve the possible causes of Internet connection problems in Windows XP?
Reference: Wired and wireless in Windows network connection problemsAdvanced Troubleshooting for Windows workstations network card
Hope the helps of information.
-
internet connection problems Windows xp
my windows xp laptop does not connect to the internet. tried to restart. Netshell.dll, refreshing and the other two? NetMan? only work... any basic information would be great. I tried the installation Wizard but wont even boot to the top. He's here. theres no icon on the desktop or whatever it is to show a network. any help please!
Hi jimmyschaff,
- Did you the latest changes on the computer?
- Are what Wizard you referring?
- When was the last time it was working fine?
- What is the type of internet connection you use?
- What happens when you try to connect to the internet?
Check out the articles below and try the steps mentioned, check if it helps.
How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP
http://support.Microsoft.com/kb/825826
How to troubleshoot possible causes of Internet connection problems in Windows XP
-
Why start having internet connection problems when I watch a lot of videos in windows vista?
Why start having internet connection problems when I watch a lot of videos in windows vista?
Bandwidth saturation, perhaps?
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
VPN remote access - no network connectivity internal!
Hi Experts,
I understand that it is a very common problem when considering the implementations of IPSec VPN for remote access using Cisco VPN Client. But for the last six months, I have tried to configure remote VPN access to as many sites customer and gets stuck to the top with the same question!
-The remote VPN Client connects, authenticates successfully to the local user database (to make things easier, I used the local user authentication), the tunnel is set up (I could see the exit of the isakmp #show her as a AM_ACTIVE ). So I think that the parameters of encryption and authentication for Phase 1 /Phase 2 should work because the tunnel is having successfully established
-Now comes the question, no connectivity to the internal network. I tried all the possible solutions, that I could find online.
1. the most common problem is NAT - Traversal not active
-Compatible NAT - T with the time default keepalive of 20
2. None of the configurations NAT to exempt remote VPN traffic
-A ensured that Nat configurations not present in configuration and internal network 192.168.1.X VPN traffic networks VPN 192.168.5.X /192.168.10.X being exempted NAT
3-Split tunnel configurations
-Reconfigured Split tunnel access list configuration Standard access list expanded (although not required as a Standard access list is more than enouugh, if I'm not mistaken) to allow traffic selected from 192.168.1.X for 192.168.5.X/192.168.10.X that will create routes on Client that allows users to simultaneously access VPN resources and access Internet VPN client. The Tunnel from Split network group was added again to the group policy.
4 enabled Perfect Forward Secrecy (PFS) /Disabled
. It may be an extra charge, it has been disabled / enabled
5. the road opposite Injection
-Ensured that a temporary reverse route has been injected to the routing table by allowing the reverse Route Injection to insert automatically the temporary static routes to the remote tunnel using the command set reverse road networks
A few more interesting things were noted:
Encrypted and Bypassed packages found when a continuous ping started the ASA inside the interface.
No decryption happens of the VPN Client, which means that there is no answer back from the network traffic statistics.
Decryption and packages are found be increasing when I try to ping of the IP address to the customer (192.168.0.10) has published the SAA. But on the SAA, I'm not back any response and showing as? . So that would mean that there is communication of ASA to the customer via the VPN tunnel while no communication is happening from the internal network to the customer
The entire configuration is shown below
ASA Version 8.2 (1)
!
ciscoasa hostname
activate the encrypted password of AS3P3A8i0l6.JxwD
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP X.X.X.X 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
access-list extended SHEEP allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
ST1 list extended access permitted ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
IP local pool testpool 192.168.0.10 - 192.168.0.15
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dyn1 1jeu transform-set FirstSet
Crypto-map dynamic dyn1 1jeu reverse-road
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap outside crypto map interface
crypto ca server
SMTP address [email protected] / * /
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.10 - 192.168.1.132 inside
dhcpd dns 8.8.8.8 4.4.4.4 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal RAVPN group policy
RAVPN group policy attributes
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value ST1
the address value testpool pools
dk Z6zukyDvwVjP7o24 encrypted privilege 15 password username
sv i1gRUVsEALixX3ei encrypted password username
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
address testpool pool
Group Policy - by default-RAVPN
testgroup group tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:48f0863a70b8f382c7b71db0b88620fe
: end----
Could you please help me identify where I'm going wrong. Its been a long time I have trying to figure out but nothing seems to work! ;-(
Help, please!
Thank you
ANUP
(1) pls replace the tunnel ACL ACL standard split as follows:
no extended ST1 192.168.1.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0
access-list allowed ST1 192.168.1.0 255.255.255.0
(2) add icmp inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
(3) Finally, I add the following so that you can test the ASA inside the interface:
management-access inside
-
Strange internet connectivity problem
Hello!
I'm having a connectivity problem I have never met before. I use a wireless router from Apple with internet cable.
Yesterday, my computer would be is no longer in contact with my router wi - fi. I get a message that the network could not be attached (I ran the Diagnostics wireless, but it's a whole lot of sense to me empty files). However, I also have a Roku, and which IS connected to the WiFi without problem. I completely stopped and restarted the computer, no joy. Reset the modem and the router, no joy. Still works with Roku, not with the computer. But the weird part is, I have Optimum Online, which allows subscribers to log-in to its hotspots, and it worked! I am connected Optimum wi - fi network on my computer right now.
So I don't know where is the problem! It is not the router, because this is related work with Roku and is not the computer, because it is connected and working with the Optimum hotspot. What gives?
Try this!
Go to the Apple menu > System Preferences > network
Select a Wi - Fi connection in the sidebar and then click on the button "Advanced...". "in the lower right corner of the screen
In the list of preferred networks, delete the name of your Wi - Fi network
Click on the "OK" button to save that change and then 'apply' in the network preferences window.
Now, go to the Applications folder > utilities > Keychain Access
Make sure that "Login" keychain is selected and "All items" in the category is selected in the sidebar
Use the search field to find items that Keychain with the name of your Wi - Fi network and remove
Quit Keychain Access
Now try and access your Wi - Fi network
-
Unable to access secure Internet connections
I have my laptop series satellite has recently stopped for allowing me access to secure Internet connections. When I spoke with my Bank's online support, they identified that I will need to reinstall the xp home operating system and it will get it back. Only thing is, is that it came pre-installed, and I did not all discs...
I don't want to pay a bomb buy new XP - any suggestions on how I can make low-cost cela? I get a new digital / provider internet tv etc Thursday the engineer came to the House to install it and I need to have this problem before it happens (this leaves me a day and a half!)
Help! Thank you! :)
Hello
Try to contact Toshiba service partner allowed in your country and order the original CD from recovery for your unit. I'm sure that it will not cost you much.
You can find the address under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Good bye
-
Satellite C850-19Z - internet connectivity problem
Hello
I bought this laptop about 14 months ago and have had fairly consistent problems with internet connectivity. Initially, the problem occurred when the prompt "Choose your browser" would appear. After selecting IE or chrome, in a day or two, we would start to get the "limited connectivity" message. We have around this simply by avoiding the selection of the browser prompt, but would still have problems every few months, IE being told there was a communication problem with the DNS server.
We did the usual stuff: unplug the modem for a few minutes and sometimes he would settle the matter, but only temporarily.Usually, as soon as the first problem arises, it would be just a matter of time until we could get no connection whatsoever. The only thing that could make it work again was a complete restoration of the system, we have done 5/6 times over the months.
In any case, it happened again, but this time NOTHING we tried before doesn't work. He started by see us full bars and 'connected', but being not able to open Web pages and now tells us that there is the usual problem of "DNS server".
Any help would be greatly appreciated as I'm not able to get a new laptop, or pay for repairs now.
I must also respectfully as advice or assistance request to explain as if you were talking to a 5 year old... This is NOT my fort!Thank you very much.
Hello
Usually all the laptops with the factory settings and good connection LAN or WLAN can be used immediately for the internet. You have to just pick your favorite browser or install it also and just start using it.
In your ad I didn't understand one thing: what type of connection do you use.
Are you using a LAN or WLAN connection? -
Xbox 360 internet connection problems
I can't connect to internet because there is no gateway and my ip address does not work
What should I do? #Hi Stephen94,
Welcome to the Microsoft Answers community.
a. Since when are you facing this problem?
b. were you able to access the internet on your computer as soon as possible?
I suggest you to reset the TCP/IP stack and check if that helps.Method 1: To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
If the same problem still persists, then try the next method.
Method 2: Router/modem power cycle.
(1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
(2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
(3) shuts down the computer (not restart).
(4) wait at least 4 minutes.
(5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
(6) connect the Ethernet cable to the computer.
(7) turn on the computer.
For more information, visit the link below:http://support.Microsoft.com/kb/908885
http://www.Microsoft.com/windowsxp/using/Networking/Setup/Xbox.mspx
http://www.Xbox.com/zh-SG/support/xbox360live/connect_to_xbox_live/connection_methods/gateway.htm
http://support.Xbox.com/support/en/us/Xbox360/xboxlive/getconnected/setupahomenetwork/windowsicsconnection.aspx
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support -
Twice in the space of a few days our internet connection has been disabled. System Restore solve the problem - temporarily. It would be good to know exactly which file is causing the problem.
I applied all the updates of Windows 7 on 5 computers and encountered no problems. You use McAfee antivirus by chance? There was an update for that because of the problems of Internet access for some. Check with McAfee, if you use that.
Good luck.
-
Internet connection problem, error: status WAN down.
Hello. We have a Windows 7 and a Motorola 2247-N8 wireless modem/router. Recently, our internet connection has dropped. I was able to reboot the router, but on the main login page, it says "Status WAN" is declining and the PPP username and password are empty. These two things are related? Can I do to solve this problem? Thank you.
Thanks for the information. Your observation of the Westell modem/router is in line with what your ISP says you: your modem is assigned an IP address by a DHCP server at your ISP.
Your two pieces of equipment have in fact several parties. Both of them have modems, which is the interface between you and your ISP. Both of them have routers. A router is required between the two networks; in your case, this is the Internet on one side and your local area network (LAN) on the other side. Unit integrated Motorola also a wireless access point.
You only need one of each part: a modem, a router, and a wireless access point.
Normally, you should be able to use the Motorola device and renounce the Westell unit. However, the unit modem Motorola seems to have a problem to connect to your ISP. According to the User Guide, that I found for him, this unit of Motorola doesn't seem to be able to connect to the type of system used by your ISP.
You can use parts of two devices: the modem and router Westell unit and wireless point from the Motorola unit.
I'm going to assume that this is the User Guide for the your Motorola device--> http://www.arrisi.com/modems/datasheet/2247-n8/2247_user_manual.pdf
Connect an Ethernet cable between your computer and one of 4 yellow Ethernet ports on the unit of Motorola. Open a web browser and type http://192.168.1.254 in the address bar and press enter (see page 13 operating Guide). You may or may not assign a password for the configuration utility (you should end this) as described in step 4. Skip steps 5 to 7.
Click the "Configure" (page 16), then click on "DHCP server". Uncheck the box "Enable DHCP server", and then click "apply changes". You want to disable the DHCP server in the Motorola unit because you plan to use the DHCP server in the Westell unit.
If you already haven't, go back to the configuration menu and click 'Wireless' and set "of basic wireless settings" (p. 21), you want wireless to be activated, you want the 'Standard' to be compatible with your laptop and other wireless devices (B/G/N is the most flexible; use G or N-only if you know that all your wireless devices use the same wireless standard). I recommend uncheck Wireless Protected Setup. "Channel" should be 1, 6 or 11 (you may or may not need to change the channel; in general, this is necessary if you live in an area where there are many nearby wireless networks, as a residential building).
In the "Wireless security" (p. 23) article Choose WPA2 if all your wireless devices support this standard. Otherwise, use WPA. Don't use WEP or anything. Do not 'hide the SSID' or "Block Wireless Bridging." If you wish, enter a new name SSID (p. 24). If you do this, do not use your name or address in the SSID name.
Make sure you click on "Apply changes" once you make a configuration change.
At this point, you can exit the utility of configuration of the Motorola.
Disconnect all connected to DSL entered the Motorola phone.
Plug the phone cable between your wall socket and the entrance of LILY on the Westell unit.
Connect an Ethernet cable between the port of 'Data' at the back of the Westell unit and one of the yellow Ethernet ports on the unit of Motorola.
At this point, you should be able to access the Internet using any device connected by wifi to the Motorola unit or (b) any device connected to one of the 3 Ethernet ports yellow on the unit from Motorola which is not used to connect to the Westell unit.
Last words:
If you created a password to access the device configuration utility (and you should), write it down on a sheet of paper and the paper to the tape drive.
The IP address, you need to use in order to access the configuration of the Westell unit unit is 192.168.1.1. Write this on the same sheet of adhesive paper such as password and the Westell Westell unit.
The IP address, you need to use in order to access the Motorola unit configuration utility is 192.168.1.254. Write this down on the same sheet of paper as the Motorola password and stick it to the Motorola unit.
The DHCP server in the Westell unit by default local IP addresses assignment between 192.168.1.15 and 192.168.1.47. This should be more than enough. You can check the IP address local to any computer by opening a command prompt window and typing in Windows
ipconfig/all (press on enter)
This will show you the IP addresses assigned to all NICs (wired and wireless). You need only be concerned with IPv4 (not IPv6) addresses.
Note that if you open a web browser and go to a site such as http://www.whatismyip.com/ , you will be able to see the IP address public attributed to your Westell modem by your ISP's DHCP server. In this case, "public" means that all users can see at this address. However, router Westell "cache" local to your devices IP addresses so they are not visible on the Internet.
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
-
Internet connection problems Asus G750JX Qualcomm SR9485 prevention
I've had this laptop for my graduation in the middle of May. Since 9 June my laptop randomly drop internet connection so that it says I still have the connection. I mainly use this computer for internet activities.
I already tried things.
- Factory reset
- Download driver new site Web from Asus
- Download driver for prevention Web site
ASUS G750JX 17.3 "i7-4700HQ 2.40 GHz 16 GB 7200 RPM 750 nVIDIA game W8 disc HARD 3 GB 770 M Full HD Blu - Ray laptop
Hello
Collate ASUStek support, their drivers and documentation online and ask in their forums
on known problems. Don't forget to update the WiFi drivers with the latest version available at
ASUS and then check for a newer version on the sites of Atheros.ASUS - Service<-- includes="" live="">-->
http://www.service.ASUS.com/ASUStek support
http://support.ASUS.com/ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usASUStek drivers
Atheros http://support.Asus.com/download/download.aspx?SLanguage=en-US- drivers
http://www.Atheros.cz/Qualcomm-Atheros - drivers
http://www.QCA.Qualcomm.com/resources/driverdownloads/========================================================
More troubleshooting:
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmMicrosoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8 - Hardware
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft - Windows 8 - why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft - Windows 8 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Thunderbird 31.0: Tabs open not record leaving
When I close Thunderbird 31.0 with tabs open and restart once the formerly tabs are not restored. The same problem I have with the file of the selected account. At the start of the Thunderbird don't remember. With older versions, it worked without an
-
Password BIOS after update BIOS on Satellite A210-131
I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.What is the password?
-
HP Pavilion x 360: forgot password x 360 power
I forgot my password on it please help. Cose halt is [1 87857794]
-
I need to know which connector is line in
HP Pavilion a6742p desktop PCSerial number: [personal information]Product number: fq619aa I run Win7 home prem 6 GB mem I'll try to record an audio cassette that I bought legally. I need to know which connector is line in My wife needs this song so s
-
HP e-Print C310c: I can not print on some colourd paper or black paper
Hello everyone - this is my first time introduced into the HP community - please excuse me if I posted this in the wrong place etc. in any case my problem (the impression I visit the GP ) I have a wireless HP e-print printer with, I dare say - not ge