Tecra 9100 - installed like 512 MB RAM, but it slowed down my computer!

Similar Questions

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• Ping.exe takes a lot of computer RAM and everything slows down

  Original title: ping.exe

  Ping.exe takes a lot of computer RAM and everything slows down. I stop the process, but it comes back. How can I remove it permanently?

  Hello
  I suggest that you try to run the computer analysis online and check if this may help:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Should have 8 000 emails in my Inbox Windows Mail (Vista) considerably slow down my computer with 3 GB of RAM and trigger alerts from Norton of "the High CPU use by Windows Mail.

  In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?

  If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)?      .. .in windows Live Mail (Vista)?

  Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?

  I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.'  Gravity is the next, and what can I do to fix the problem?

  Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files?   This change of response if the e-mail is unread vs bed?

  #2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.

  I would also say this. Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  It can be very useful, and it can't hurt anything.

• Tecra 9100 - where to get extra RAM?

  OK, so I found Crucial.co.uk a very useful site to determine what RAM your system can work with. Please can someone clarify for me than if I buy a 256 MB of RAM from them that I will also be able to use 256 MB of RAM already installed. It will be 512 MB of RAM - perfect for me.

  And another thing, where can I find slot1 and slot2 and RAM is easy to install?

  Thank you, and here is the Web page: http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=E927B290A5CA7304

  Post edited by: lewislite

  Hello

  The Tecra 9100 can be improved up to 1024 MB.
  Two memory slots are available at the bottom of the unit and therefore, you can use the two modules, i.e. 2 x 256 MB or 2 x 512 MB.

  As said that banks of memory are placed at the bottom of the unit. I think that it s in the middle and the coverage is only fixed with a screw.
  Simply remove this screw and you will be able to open the lid and should see two slots

  A hint; You can find useful information in the user manual. This can be downloaded from the page of Tosh

• Satellite L20: Installed 1 GB of RAM, but OS see 894MB RAM

  Hello

  I have 2x512mb ram installed in my Sat L20 but system says I only have 894 MB of ram, this means that there is some kind of problem? Thanks for your help.

  If the video card uses system RAM to increase the VRAM, then it is normal.

  Run dxdiag and look in the graphics section.

• HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

  my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

  Hi @minxfiles ,

  Welcome to the HP Forums!

  This is a good place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have 6 GB of ram and it is only readable 929 reading.

  Just to be sure you're correct DDR3 ram installation?

  Installing the chips of RAM, they must be of the type suitable and properly matched.  You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

  If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

  Good luck!

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed 6 GB of RAM, but only 2 GB can be used

  Hi I looked for an answer to my request, but I found the same answer everywhere and it does not

  I run Windows 7 64 bit and I have 6 GB of installed RAM (Yes in the system it says that its installed) BUT

  He said also only 2 GB of ram is usable out of that 6 GB?

  Now, my GPU (Asus geforce gtx 470) says in the manual it has 1 GB of memory dedicated, so that leaves 3 GB missing lol

  In my BIOS my PC says I have 2 GB of TOTAL ram? Now, it's an important goal. I have an Asus p7p55d-e pro motherboard. Any help as to how I can check if the ram IS working properly or how to make this usable ram?

  Thank you!

  What RAM do you use? Also update the BIOS, please. Remove the gain of RAM and put it back. Maybe it is not properly installed. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I installed 1 GB of RAM, but it is not reading in my program. It should say "went to 2 Gb". ?? Right?

  I don't see the 2 GB on my PC.  He doing anything?  Or is it just sitting there?

  http://www.crucial.com/

  Scan your Systerm with the tool on the link above to find out what type of RAM installed and RAM good game.

  And make sure that the RAM sticks are placed correctly.

  See you soon. Mick Murphy - Microsoft partner

• I bought a camera that came with Photoshop Elements. At the time, I didn't have my own computer to install it (using the CD) but now I have a computer (a Macbook Air) that does not have a CD player and I can't download the disc. Is it possible for me

  Help?

  You can download at the bottom of the link:

  Download Photoshop Elements products | 10, 11, 12, 13

• Micorsoft windows search filter host uses 3g of ram and slows down the computer to a crawl.

  search filter host started running after the updates and it slowed my laptop to a crawl.   Why is it turning?  And that fact?

  Running Vista on the HP hdx laptop.  RAM 4g dual-core

  It is probably rebuild the search Index (maybe called something in one of the updates for this action) - Although it could do other things as well (it's hard to tell).  You can do this finish faster in general by reducing the number of file types or sites included in the Index (Start/Control / Panel / Indexing Options / Advanced)- but the file types and locations are not included in basic research (it's a compromise).  Some people say that excluding files .xml help (especially if you have a big disco).

  If this does not solve the problem (or you're stuck with it running and it will not be closed) Download Process Explorer http://download.cnet.com/Process-Explorer/3000-2094_4-10223605.html and see which fits all the CPU usage - it should provide more information than Manager and helps focus in spots on the problem.

  The problem may be with the updates (or one of the updates).  Try a system restore to a point in time BEFORE the problem started (before installing updates without doubt).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates (but be careful, because if the issue is resolved, then one of these probably caused updates and you do not want to recreate the problem).

  For more information on the updates (which seems to be the source of your problem since it was started after them installed), repost in the Windows Update Forum: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the people who specialize in updating issues will be more than happy to help you with this problem.  Try to provide them with the names of the updates and their number KB (as well as all that you have done to try to solve the problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why speedgrade slowly guard eating up more RAM? Why slowing down?

  So, I tried to use the new Speedgrade CC 2015 on my desk with:

  • 4790 K I7
  • GTX 960 (2 GB OF VRAM)
  • 16 GB of RAM (Corsair Vengeance 1600 Mhz)
  • Purple WD 3 to HARD drive
  • Corsair 650W PSU

  I have some Adobe products configured to use up to 12 GB of Ram, while the 4 GB remaining is used to run Win 8.1 and several other background processes (Ref: image provided).
  I realized I still edition speedgrade pantry gradually upward from RAM. I have a 5 min video with several cuts I've linked directly from Premiere Pro for Speedgrade and even a few basic changes later, I think the program is weak and there is a serious mismatch between change values and the changes that appear on the screen. Is there a bottleneck of some sort that I'm missing here? The use of the RAM develops gradually with each additional change. Here a picture after some modifications in speedgrade. Note that I closed Premiere Pro after import via the Direct link.
  

  As a result I can't continue working in speedgrade and must close and restart. But the problem starts again in a few moments. What I'm doing wrong here? Also, is this normal high ram for a 5 min video with barely any changes done in speedgrade?

  There is a memory leak in Sg that strikes some people and seems to have expanded, including YUV Vectorscope, opened. Given the ranking without scopes is so limited that they are stupid, well, that's a problem. They are working on fixing this problem as she can hit hard. Saving & never closing ten minutes is a pain, no? My 32 GB of RAM lasted a little longer... but still would be mounted max and s l o w everything down. Dennis Weinmann has noticed this on another thread here...

  Neil

• I7 quad PC, 12 GB RAM, 64-bit slows down after several click operations

  My usual assembled quad i7 PC is about a year old.  I had a recurring problem of the working speed using the mouse during video editing.  The first mouse functions start clicks quickly to the Premier Pro and other Creative Suite CS5 software.  However, after only several mouse clicks, nothing appears to register.  After a short time, mouse clicks become active again but the PC becomes slow.  It was recommended that I check with Adobe to confirm that my system complies with the specifications of the Creative Suite CS5.  As far as I know, the system exceeds the specifications of the software box.  I fear that one of the RAM modules may not be meeting the specifications for speed.  How can I check this for the following configuration or other suggestions?

  -ASUS P6TWS Professional Motherboard

  -Intel Core i7 920 CPU

  -12 GB OF DDR3 1333 RAM

  -4 HD 1 TB

  -Video card ATI RADEON 4670 1

  -Coolermaster 690 case separate real power 700W

  -LG BlueRay writer

  My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer, I built, with similar and very different things

  Win7 64 bit Pro with all updates (automatic) and with all updates (automatic), so the body is 5.0.3 CS5 Master Collection

  Wired keyboard and mouse (old style, no USB) using the generic driver for Win7... not intellipoint, I've read in other messages CAN cause problems

  Connection through DSL modem, which is also a network of House (2 computers) via the DSL modem

  I had ZERO problems of any kind, with the body

  My best guess is that, Yes, the "bells and whistles" of your intellipoint mouse driver CAN cause problems... but with a wireless mouse, YOU indeed this specific driver to make the mouse work not at all

  Sorry... I don't have any other ideas to offer

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer