in parallel to the max, process, process servers parallel slave: relationship

Similar Questions

• On the user process start/exit Windows memory leak

  I have more question just ask why batch file back in before the current ordering process properly release the .exe file, I see that some memory is not released at all. In other words, once again, I create and execute processes in the loop (here, to increase performance I do in parallel threads)

  off @echo

  IF "% ~ 2" == "" GOTO args

  SET /A FIRST_ARG = "% ~ 1" * 1

  IF % FIRST_ARG % EQU 0 goto single_thread

  : multithreaded
  for/l %% in (1, 1, % 1))
  Start % ~ n0 thread % t %2
  )
  end goto

  : single_thread
  echo from %1 %2
  : pushd z:

  for/l %% in (1, 1, % 2))
  Echo % iteratation 1%.
  echo int hand ^ (^) {int a = 0; for ^ (; a ^< %%x00000="" ;="" a++^);="" return="" a;}=""> %1.c)}
  GCC %1.c-o %1.exe - lm
  %1.exe
  )
  : popd
  end goto

  : args
  echo Usage1: % ~ n0 threadID executions
  Use: 2 Echo% ~ n0 ^ ^. 
  ECHO have first created a number of discussions and execution second order with them
  : output

  You start with 30 1000 arguments to have 30 parallel processors in batches, each compiles a 1000 times program and runs it. The problem is that the memory develops its use

  

  It's mine bug, you say? Where? In the end, I finished all batch processes. Memory consumption continued to increase. Yet, you see, he is not released. Is this ok? I noticed that my PC is starting to get excited. I can't even move a mouse after some 1000 CCG performs a loop with my simple program execution. PC becomes slow as hell and nothing helps to recover its restart performance but the machine. It seems that some memory leaks in Windows. It's not all recover when the process stops. Is this a known issue?

  It seems to be question of Windows Professional. I can't reproduce it in Windows 7 Enterprise, which also gets the requested CPU easily 100%.

  ------

  Update

  Note that this cannot be an antivirus because I have disabled all the and here is the card memory of mine

  Image name PID Session name Session # Mem use
  ========================= ======== ================ =========== ============
  System Idle Process 0 0 24 K Services
  System 4 0 1 320 K Services
  Smss.exe 340 Services 0 144 K
  Services of csrss.exe 516 0 992 K
  Csrss.exe 592 Console 1 4 568 K
  Wininit.exe 600 Services 0 256 K
  Winlogon.exe 648 Console 1 292 K
  Services.exe 692 0 6 056 K services
  Lsass.exe 712 0 4 988 K services
  LSM.exe 728 Services 0 1 680 K
  Services svchost.exe 824 0 3 848 K
  nvvsvc.exe 884 Services 0 252 K
  nvSCPAPISvr.exe 908 Services 0 1 K 100
  Svchost.exe 952 Services 0 4 396 K
  Services svchost.exe 132 0 9 K 420
  Services of svchost.exe 588 0 701 588 K
  Services svchost.exe 780 0 6 484 K
  Services svchost.exe 840 0 25 628 K
  audiodg.exe 1088 Services 0 14 848 K
  Services svchost.exe 1236 0 8 908 K
  Spoolsv.exe 1364 Services 0 4 780 K
  Services svchost.exe 1400 0 5 112 K
  Services svchost.exe 1436 0 11 684 K
  Services armsvc.exe 1548 0 216 K
  AppleMobileDeviceService.     1576 services 0 1 396 K
  BOINC.exe 1676 Services 0 2 704 K
  mDNSResponder.exe 1768 Services 0 2 004 K
  GfExperienceService.exe 1828 Services 0 268 K
  Services of XSrvSetup.exe 1876 0 292 K
  jtagserver.exe 1916 Services 0 272 K
  httpd.exe 1948 Services 0 548 K
  NvNetworkService.exe 1256 Services 0 412 K
  Services nvstreamsvc.exe 1456-0-688 K
  nvxdsync.exe 1584 Console 1 1 104 K
  nvvsvc.exe 1340 Console 1 556 K
  SNMP.exe 1428 Services 0 1 168 K
  Services svchost.exe 2096 0 292 K
  Services httpd.exe 2164 0 6 180 K
  vmnat.exe 2244 Services 0 532 K
  Services gcbarsvc.exe 2560 0 204 K
  vmnetdhcp.exe 2600 Services 0 392 K
  VMware - 2648 Services 0 524 K usbarbitrator64.ex
  Services nvstreamsvc.exe 2676 0 3 132 K
  conhost.exe 2684 Services 0 212 K
  Vmware - authd.exe 2764 0 1 912 K services
  Services mvraidsvc.exe 2960 0 3 432 K
  Services svchost.exe 3548 0 264 K
  ALG.exe 3588 Services 0 240 K
  WUDFHost.exe 3752 Services 0 244 K
  TaskHost.exe 4584 Console 1 6 988 K
  4604 Console 1 928 K nvstreamsvc.exe
  conhost.exe 4624 Console 1 400 K
  DWM.exe 4840 Console 1 35 676 K
  Explorer.exe 4864 Console 65 1 228 K
  Console NvBackend.exe 4968 1 3 628 K
  Console RAVCpl64.exe 5020 1 1 004 K
  Console AppIntegrator64.exe 5052 1 252 K
  GoogleCrashHandler.exe 944 Services 0 320 K
  GoogleTalk.exe 160 Console 1 4 308 K
  MSOSYNC. EXE, 1172 Console 1 2 284 K
  Console Workrave.exe 264 1 10 308 K
  Skype.exe 2860 Console 1 52 876 K
  3556 Console 1 968 K nusb3mon.exe
  acrotray.exe 3876 Console 1 476 K
  boinctray.exe 624 Console 1 460 K
  3504 Console 1 480 K gcbrmon.exe
  gcbrmon64.exe 772 Console 1 412 K
  5228 Services 0 252 K GoogleCrashHandler64.exe
  Services wmpnetwk.exe 6100 0 4 236 K
  Services svchost.exe 1864 0 26 684 K
  Wuauclt.exe 1304 Console 1 420 K
  Procmon.exe 705132 Console 368KO 1
  Procmon64.exe 705204 Console 1 4 696 K
  PROCEXP64.exe 1374272 Console 1 126 K 620
  WmiPrvSE.exe 1377420 Services 0 6 864 K
  chrome.exe 1015464 Console 1 127 740 K
  chrome.exe 700500 Console 1 66 000 K
  chrome.exe 1013924 Console 1 39 968 K
  chrome.exe 1014888 Console 32 1 508 K
  chrome.exe 639844 Console 1 69 256 K
  WinRAR.exe 4236 Console 1 26 748 K
  RAMMap.exe 1342448 Console 5 1 K 200
  RAMMap64.exe 1331116 Console 1 790 112 K
  chrome.exe 124224 Console 32 1 584 K
  Notepad ++ .exe 1377448 Console 30 1 712 K
  chrome.exe 634932 Console 1 93 284 K
  cmd.exe 392796 Console 1 3 596 K
  conhost.exe 1377564 Console 1 10 184 K
  Tasklist.exe 1343860 Console 1 6 536 K
  WmiPrvSE.exe 5124 Services 0 6 964 K

  Note that there is nothing near the gigabytes. RamMap report, takes into account a few gigabytes

  

  and the "Process" tab contains some gcc thouthand, cc1, as.exe, ld.exe, collect2.exe and other process that I started with gcc tools. I don't see in the list/process manager task, nor Process Explorer howerver. I can't RamMap them where?

  I got the answer https://social.technet.microsoft.com/Forums/en-US/0b610346-fc53-4b39-8cfd-9737d265c3f4/physical-memory-leak-by-terminated-processes?forum=winservergen#0f4158fb-050b-477d-9489-ee7afb602d2e. (Sentinel) Aladdin drivers blocked the destruction of the process after it is removed from the list of processes.

• "Error: not allowed to run the local process" during the execution of a WF in vRO7.0

  Hi all

  Need your help. We encountered a problem - "not allowed to run the local process", during the execution of a WF in vRO7.0.

  In this WF, they attempt to run the script class vRO 7.0 Server 'command. By default the Orchestrator applications having not allowed to run the command class, we get allowed by a mistake.

  To resolve this issue we need to set the system property ‘com.vmware.js.allow-local-process=true’ to the ‘vmo.properties’ properties file of the vRO 7.0 Orchestrator server.

  We already have the property to true for the properties file under ' / etc/vco/app-server " folder and after Orchestrator services are restarted. But still, we get the question.

  Another thing is that we use vRO cluster machines, so we put the real in both files to vmo.properties on both servers.

  
  

  Can you help me please how to fix?
  

  
  

  We have followed the link below.
  

  https://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.vco_administer.doc_42%2FGUID-F4995BD2-f2f7-48C0-B239-197F27FFE693.html

  Thank you

  Miloud

  Thanks llian, complete reboot of the devices/machines vRO made the resolution.

  Now everything works fine.

  Thank you

  Miloud

• Cloning a virtual machine running Live - destination of the is an exact match to the source at the beginning or end of the cloning process?

  Hello

  I'm not a VMware Expert, so please forgive my noob question.

  I was invited to migrate files from Windows Server 2003 to 2012 servers, and I intend to use cloning as a way of copying the VMDK with data from the file to the new server of 2012.

  I created a script with vSphere PowerCli, which made a clone of the source and, once the cloning is complete, it stops and disables the Server service on the Windows of the source virtual machine operating system to avoid changes in the source of this point in time.

  But I noticed, I have start by making a snapshot.

  Question:

  Changes made to the source VM when creating the clone will then be synchronized at the end of the cloning process, so that the destination virtual machine will be an exact copy of the source, at the end of the cloning process?

  Or destination VM will correspond only to the source of the VM at the time of the opening of the cloning process, and all the files that have been updated on the source VM when creating the clone will be lost on the destination?

  Thank you for helping me to get a clear understanding of the present!

  Best regards

  Changes made to the source VM when creating the clone will then be synchronized at the end of the cloning process, so that the destination virtual machine will be an exact copy of the source, at the end of the cloning process?

  Laughing out loud

  Or destination VM will correspond only to the source of the VM at the time of the opening of the cloning process, and all the files that have been updated on the source VM when creating the clone will be lost on the destination?

  Yes, the destination will be the data from the time you start to create the clone, because a snapshot will be created on the beginning of the process and the basic of this hat of the VM disk will be copied, all changes made on the source VM will be writing about the delta file and these data will not be copied.

• vSphere 5 How do I restart the syslog process

  I have to change the location of the directory of syslog on one of my servers for vSphere 5 and got a strange error. Now the vmsyslogd process is not running. I tried the command "esxcli system syslog reload", but it gives just the error ' failed to report reload vmsyslogd'. I also tried service.sh restart, but it did not help either. There must be a way to restart the syslogger without having to restart the entire server!

  Any suggestions? Thank you!

  try to start syslog by ' / usr/lib/vmware/vmsyslog/bin/vmsyslogd ' & 'esxcli syslog system reload.

• Error in the approval process

  Hi all
  
  I am a new bie to OIM 11 g. I developed a custom (single level parallel) composite approval and it works very well.
  According to my new condition, I need to add two blocks of approval set before the parallel approval block. Throughout the approval process contains 3 levels of approval with the third level as a parallel approval block.
  
  Level 1 approval will be a default approval and by default, all requests must be routed to this level.
  Based on a condition (create/edit/delete user), the request must be routed to the 2nd and 3rd level approval.
  
  In one scenario (condition), requests are routed to 1st, 2nd, 3rd level. In another scenario, requests are routed to approval level 1st and 3rd. In the two scenarios above, the request is completed successfully.
  
  In the last scenario (where lack of condition for the 2nd and 3rd level) the request is only forwarded the approval level 1 and not the other two levels. In this scenario, I get the following error, and demand is a failure.
  
  WLSPropertyUtils:getOperationName, the operation name is null
  Invalid result COMPLETED received the SOA for the id of the request 3058.
  [CALLBACKMSG] Plugin to change internal State for request 3058 and the status is: query failed.
  [CALLBACKMSG] Inside the plugin for adjustment of status to request 3058, target tye is resource and the operation is MODIFYRESOURCE.
  [CALLBACKMSG] Inside the plugin for adjustment of status to request 3058, target tye is resource and the operation is MODIFYRESOURCE.
  An attempt was made to search for unversioned
  resources global 'tail' of a version of the application "IOM [Version 11.1.1.3.0 =] '. This can potentially lead to conflict the uses of the global resource between multiple versions of the application.
  WLSPropertyUtils:getOperationName, the operation name is null
  
  Let me know if I am wrong anywhere or please suggest what to do to solve this problem.
  
  Thanks in advance for the help.
  
  Thank you
  PT

  Below you will find the link
  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/request.htm#BABJGIFJ
  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/request.htm#BABFIAIH

  check the mapping of "task results is REJECTING" and "results of the task is APPROVED.

• a lot of the great process time table

  Hello world
  I have a problem with a process that calculates 6 columns in a table with 260 million lines. Initially, the computing time was about 1.2 minutes per line. which obviously takes more than a lifetime to the end (about 500 years).
  To improve this process naturally so my first step was to the partition table. This create 64 partitions ranks 5 million in total. My second step was to use a big raise with a limit of 500,000 by block, in this way, I have my table and the next step is to calculate my columns. Unfortunately, my first 2 columns just take 2 hours to complete the 260 million (Note: I need to calculate all the rows in the table), but the rest of the columns, take 90% of total or even more. Finally, I make a big day with forall using data calculated on my paintings.
  After all this, calculation time was reduced from 1.2 minutes by the line to 6 or 7 seconds per rank. time, which is great, but only reduced from 500 years to 49 years.
  With this Setup, my next logical step is to parallelize my request, but if one have a degree of 8, my best shot is to take 6 years.
  Now, four of the six columns, the problem is that I need to calculate some values which requires some avg and sum over from these last six months before recording data.
  So, here's my real question. How I do it works?... surely I can't wait many years. the company is perhaps broken before this finish.
  Who is the professional way to make this real? I think that there, businesses have tables with many more lines, or even billions, I saw in other forums.
  I need this, somehow, somehow, it takes not more than one or two months... still less is even better. Help, please
  
  My DB is a 11G, running on 64 bit. 32 GB of RAM, CPU Quad Core 6.

  -Please explain what makes this request
  Select nvl (avg (chargeable), 0), max (flactual), max (flanterior), max (lactual), max (lanterior)
  in v_facturable_ant, v_flactual_ant, v_flanterior_ant, v_lactual_ant, v_lanterior_ant
  of mv_data_sec
  where v_periodo (idx) period
  and cod_empresa = v_cod_empresa (idx)
  and id_cliente = v_id_cliente (idx)
  and id_medidor = v_id_medidor_consulta
  and flactual = (select max (flactual)
  of mv_data_sec
  where cod_empresa = v_cod_empresa (idx)
  and id_cliente = id_cliente
  and id_medidor = v_id_medidor_consulta
  and v_periodo (idx) period
  and flactual<>

  1 v_flactual (idx)-online the value of an entry in the PL/SQL table
  2 v_periodo (idx)-online key to score even a record in the PL/SQL table
  3. the aggregate of all partitions except v_periodo (idx)
  4 find the max (flactual) value is less than the value # 1 above
  5 only where aggregate data flactual value = value # 4 above and
  cod_empresa, id_cliente, id_medidor a recording in the PL/SQL table match

  This is an aggregation for each record in each partition table
  "where id_tipo_documento ('b', 'F').

  The aggregation will include all the records with the largest value flactual which is
  less than the record value of PL/SQL regardless of the value of id_tipo_documento.

  So, if there are records with values of 5, 4, 3, 2 and 1 flactual

  1 rec with value of 5 will include records that have a value of 4
  2 rec with value 4 will include records that have a value of 3
  3. rec with value 3 will include records that have a value of 2
  4. rec with value of 2 will include records that have a value of 1

  With the approach you use if there are 1,000 records with the same values, flactual, cod_empresa, id_cliente and id_medidor, your code will be
  perform exactly the same aggregation on the other values (lactual, lanterior, flanterior, facurable) 1,000 times.

  This suggests that you do what I suggested in a previous post as #2
  >
  2. create a separate query to roll up the data in the table to get the max and avg values, you want to use for the calculation and the update. This query can roll by 'cod_empresa', 'id_cliente' and 'id_medidor '. You can roll it for each period or for each 'anti period' (with period1, periode2 and period3 that the anti-periode periode2 includes all other periods - Yes period.1 & 3).
  >
  Something along the lines of

  select periodo, cod_empresa, id_cliente, id_medidor,
  count(facturable), sum(facturable), max(flactual), max(flanterior), max(lactual), max(lanterior)
  from mv_data_sec
  group by periodo, cod_empresa, id_cliente, id_medidor
  

  and record the results in a new work table that is indexed appropriately. It doesn't once aggregations in advance.

  Use this work table in your query above. You can now change the query or cursor to work with only one partition at a time by adding a WHERE clause with the partition key that is passed as a parameter to your procedure.

  You may even be able to change the CURSOR to join the main table with the new table of work and iterate that, without needing to make a second request at all.

  One thing. that I don't know. You eliminate aggregation online because you probably aggregate values several times according to the grouping of data.

  I would still like to see a small set of sample data and the results of your calculations on it.

• How to configure the engine JMX parameter in the administrative process?

  Hi all
  
  I installed OBPM10gR3 on the WLS 10 gR 3 clusting shell. OBPM Motors started successfully.
  
  There is an administrator of the server running on localhost: 10101, a Manager running on localhost:10103 server, another server managed running on localhost:10105.
  
  I wonder how do I set the engine JMX configuration in the Administration process. What port? 10101 or 10103,10105? How about the credentials, weblogic as the default user?
  
  I'm appreciated you can share me the configuration engine JMX in weblogic clusting administration process. Thanks in advance.
  
  Best regards
  Bill

  See below for the settings you need:

  Configuration of engine JMX management
  Host: (this must be just one of the servers in the cluster managed)
  Port: (port of the managed server you chose above)
  Main: FuegoWebLogicDeployer (create this user in weblogic first)

  Responsible for the deployment of BPM for WebLogic applications
  BPM Application deployeur URL: http://:/fuego/deploy/servlet/worker
  WebLogic Server or the Cluster name:

  Hope that helps,

  Mike

• Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window.

  When I try to open Firefox, I get this message:
  "Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window. »
  I then clicked close firefox, but the problem was solved not so I uninstalled and reinstalled firefox, but it's the same thing.
  At this point, I went to support Mozilla and tried the steps described in the article, "Firefox is already running but is not responsible for - How to fix error message", but the firefox.exe process was not in the processes tab in windows Task Manager. While he was in the Details tab, when I tried to put an end to the process, I received this message:
  
  "The operation could not be completed. Access is denied. "

  What can I do to fix this?

  Thank you.

  Usually when you stop and restart Windows, Firefox is not running and can be started normally.

  Firefox is set to start automatically with Windows? Microsoft has a utility to investigate what is set to happen at startup: https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  It is possible that something is triggering a process in your default browser and it is the hanging of Firefox. You can try to change your default browser to IE (IE can offer to do when you start) before the shutdown and restart Windows to see if it makes a difference.

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• I'm on a macbook pro, and without knowing it, I turned to the vault of fire during a software update. The encryption process has begun. If I can't decipher, which will make my slow mac? or encryption is slow mac anyway?

  Hello

  I'm on macbook pro 13-inch (mid-2012), and without knowing it, I turned on the Arch of fire during a software update (El Capitan 10.11.5). The encryption process has started and if I don't want to read more, which will make my slow mac? or encryption is slow mac anyway?

  or at the end of the encryption process, my mac is slow?

  waiting for a quick response.

  Thank you

  Prosunkanti Sengupta

  I have a MacBook Air with active FileVault 2012. There is no significant difference in performance. Note, however, that there will be a performance impact until the original encryption is complete and that it doesn't have a way to stop it.

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• Satellite L305-S5955 - gel of the boot process

  Toshiba Satellite L305-S5955
  Once it froze early in the boot process - until windows starts, indicating (to me) it must be material.

  John

  Hi John,.

  You have already reinstalled Windows with Toshiba Recovery disk (factory settings)?

  If Yes, it could be a hardware problem, otherwise, it looks like a software problem or driver.

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?