In said Fixit WUAUSERV won't start so check if enough privileges on a user's computer

Similar Questions

• T43 won't start, it must remove the battery and try again.

  T43

  2686 E7U

  My computer frequently not turn on, I have to take to HQ and main and ultrabay batteries, sit around for a while and try again and again. It never fails to start the computer in the end, but I'm also afraid someday that simply, it won't start. Currently, I decided to not turn off my computer, I just pause and restart from time to time. Stability wise it is solid, but I would like to address this issue before the end of my warranty and I don't want to be without my computer for a long time. This has been a recurring problem for much of this year.

  I don't have a working windows partition, I run ubuntu, so I wouldn't have enough to mess with resettlement of the bios unless it can really solve my problem. Information about the current bios

  1.29 BIOS version (1YET65WW) 21/08/2006

  Embedded controller 1.06

  The typical sequence looks like this.

  Computer is turned off and unplugged after a normal shutdown.

  I plug in the power adapter to the computer, and after a few seconds the Green battery light.

  I press the power button, the computer does not put away and the light / energy from the battery stop.

  The light on the battery even when I release the power button remains off.

  Next step is to remove the AC and my two batteries, wait awhile, plug it back and and cross my fingers. If does not turn on, go to step 1 and repeat.

  I sent it to lenovo and they replaced the motherboard, and which until now has seemed to solve the problem.  even got a new keyboard out of it, even if the keyboard is a little more clicky then old.

  called Sunday, got a box Monday, droped out of the box of DHL Tuesday, got my computer back on Friday.  pretty good, considering that he was sent to tennessee.

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Acer laptop won't start

  Hello, I'm new here... In any case my Acer Aspire E 15 won't start. All I get is a small box blue message which said: lack of default boot device or startup failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or Boot Recovery Media. " So I press on enter a couple of times just to go back to the same blue message dialog box. I tried to go and wait five seconds to launch a kind of recovery, but it did not work. Then I activated the f12 boot sequence, and this alteration has nothing. My laptop did not come with a CD/DVD player, when my father bought new last Christmas. I uninstalled Microsoft Office Spotify and Amazon the last time that I logged online. The 64-bit Windows 8.1 is built in. Maybe that remove some files. IDK. What should I do? Do I need some sort of media recovery USB device? Your help is appreciated. Thanks, Neil

  It was a hardware problem and now it is fixed. Back to zero once again.

• Equium L40 - Vista won't start after installation of product recovery

  Hello

  I had to realize a product uses recovery provided restore disk on an Equium L40 computer laptop (PLS41). The recovery procedure done his job to the end, reformats and copy all the files and then restarts. Now the problem starts...
  The pc gets in front of the BIOS boot screen, then it goes completely black with only a cursor to underscore flashing in the upper corner of the screen. No HARD or CD-rom drive activity.

  I did the cover about ten times now. All with the same result. I tried the repair procedure using a Vista boot CD and I also tried using another disk supplied with the computer, anytime upgrade from Vista. Here they are without defects, see the hard drive and shows that the vista files are on it, also sees the winRE partition.

  I tired even fresh install from the disc at any time. It also reformats the disk, copies and decompresses all files needed, begins to install the updates on the disk and then said: he needs to restart. It restarts and goes to black screen with flashing underscore cursor. What happens if I press the 'coup of any key to boot from CD' or leave it to boot from the HARD drive.

  I tried to fix this for two days now, including endless hours of forum to research, the computer belongs to my friend gets very angry I am. I need help. No one knows how to fix?

  Hello

  According to your message, I think that the HARD drive is faulty.
  I think there's a defective recording of MBR (MBR) of the drive and therefore the laptop refuses to boot.

  One question; have you tried to set the BIOS default settings? If this is not the case, try this.

  If it doesn t help and the laptop still does not start upward, then you should ask ASP for verification.
  I think it s a problem of HARD disk and, possibly, the HARD drive must be replaced!

  Greetings

• 4600 won't start

  Hi, community,

  my pro sat suddenly won't start. only power led flashes. Got out of the car, a piece of metal appears to be noise. But - if the drive is broken - shoulnd't the laptop will start anyway? Thank you for your help in advance. Wolfgang

  Hi, Wolfgang

  Yes, the machine must be able to start up indicating at least the TOSHIBA logo without the optical drive and fixed.

  Some background info: flashing DC-IN means that you have a problem of power supply to your machine.

  Please delete what you can without using a screwdriver. PC card, battery and so on. If you have 2 mem cards remove one.
  When everything is there, try to restart the device. Keeps blinking? If you had 2 plates of mem, remove the still inside and install another one in another location. Try again. Always the same?
  So I guess that there is a physical problem with the machine.

  If the machine starts normally, try turning off and to reconnect one removed items at once turn on the machine after each reconnection.
  Test them one by one and see if you can find out if there is a specific that causes this problem.

  Good luck!

  Tom

• Mac OS x won't start on mac pro esxi host

  We have the latest mac pro machine functioning as a construction of host 5.5.0 esxi 2718055.  We have setup the virtual Mac machine of the as a waiter in a magic triangle to our Mac OSX windows domain configuration.  Everything was up and running for some time now not really used because we delayed the purchase of our projected deployment Mac until this year.  I logged on today, and he says he has several updates and necessary to restart, so we issued the command reboot. Now the machine won't start upward.  It starts the boot process you see the Apple logo and progress bar starts moving on a 1/4 of the way and then it just turned off. I tried several of the commands below in the link, but nothing works, it just turns off. I tried to use my mac with vm ware fusion and the connection to the host and always change. I have triple checked that I am in the comments window active when you press these commands, but the problem is it only stays on during approximately 5 seconds then stops. I have removed from the inventory of esxi and re added, as well as restarted the ESXi host as well.  The virtual machine is sitting on the local storage of the esxi server.

  https://support.Apple.com/en-AU/HT201255

  Has anyone else had a problem similar to this?  I'm getting to this section and the progress bar starts to go, but then stops and turns off virtual machine.  How can I enter in address this further.

  

  Okay, so I went through the list and now I got using the command option r. tried before but maybe I press the keys long enough.  I was using my mac book pro and pro fusion to do all this. Couldn't make it work when you use the client heavy vsphere on my windows machine. Repair disk permissions is grayed out. I ran check disk permissions and got a ton of errors, ran check disk and he stopped saying repair the disk. Ran repair disk and he stopped to say that he cannot repair the disk, backup as many files as possible, reformat the drive and restore your backup files.

  Is there another way to try to fix this sucker, or is he at this point a POS and build a new one?

  

  

• Satellite L500D won't start

  Hello

  My Toshiba Satellite L500D won't start.

  When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

  I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

  I hope someone can point me in the right direction

  Buddy

  Hello

  Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
  It will be interesting to know what you did with your computer laptop last days.
  Have you installed some day or anything that may be responsible for the issue described?

  Update the BIOS maybe?

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

• HP Pavilion won't start

  How to fix my computer hp Pavilion laptop? I clicked the button refresh settings, I was afraid of losing my files so I turned it off when updating. And now it won't start.  I tried pressing f10 but I don't know what to do. Can you help me?

  Re-read my last post. I have already explained what you use. You will need to bot to a backup flash drive or a DVD in Windows 8.

  You can also start HP recovery support to access the Startup Repair.

• Computer won't start; 3 long beeps, the fan turns

  Hello

  I have a desktop HP equipped of Windows Vista that does not start correctly.  When I turn it on it looks like it is starting, I hear the fan, the computer will beep 3 times in a row (I would say long beeps) then stops and beeps 3 times in a row again.  Then nothing on the monitor, fan always running.  If I didn't get anything I think that the computer and the monitor's energy-saving.

  Before I turn it on the screen says no signal so I think the screen itself works.  I don't quite see the HP splash screen.  Pressing F8 during startup seems to do nothing.

  I created Vista backup discs (food?), but I don't think they are bootable.  Some back story: a few weeks ago, I tried to download Windows Live.  After installing the updates, I could never Live DL and the next day I got the blue screen of death.  I rebooted, you press F8 repeatedly and Windows started normally.  Although it worked fine for a few days I felt nervous that I did a restore of the system around October 31.  Everything seems to be ok for over a week but now I have this problem.  I thought to upgrade to Windows 7, but do not know what to do at this point.  I've never opened a tour - answers Google talk out of ram or certain types of error of keyboard Bios (3270 keyboard card).

  Help, please!  Sorry to be so long.  :-)

  Hello

  These beeps mean hardware problems so check with a real computer (not the leeks and pics store
  at a Best Buy or other department stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Sound beeps are error codes that describe a problem with your machine.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then refer here: If you can not start then check with the manufacturer of the system.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/