HP Pavilion won't start

Similar Questions

• HP Pavilion won't start not

  Hello

  My HP Pavilion (info below) is does not start. She asks the system repair CD I bought them at HP but the system is still not recognizes them and won't start do not. I have run all diagnostic tests (hard disk, memory, etc). All the great test, no problem. Suggestions:

  Model number:

  LW407UA

  Description of the model:

  LAPTOP HP PAVILION G7 - 1113CL

  Serial number:

  [number of Series edited by Moderator]

  Creator:

  RYYCEBL

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as coming from a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select the Boot Menu options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• HP Pavilion windows won't start

  Hello.. my computer hp Pavilion dv5 laptop starts and immediately after he says from windows will blackscreen with white cursor and hangs. When the computer starts the screen says dhcp... and in turn the line then nofilename or badfilename and when I did the test said some wild-card I think that the hobertkey all other tests, I ran seem to spend of the sections and the system restore won't let me... someone could help me please. Thank you for allowing me to post this... Robert... ps... my laptop is a hp Pavilion entertainment pc... SD.MS/Pro.MMC.xD...and windows 7 ultimate running sound

  Thanks Patnert... I installed windows 8, so I solved the problem... but certainly will use your suggestion in the future must be... I appreciate your time and your suggestion

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• HP Pavilion DV9888eo won't start with My Book Mirror 2 t connected

  Same problem here: http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&thread.id=4367

  Installation program:

  HP Pavilion DV9888eo, AMD Turion TL-60 x 2, 3 GB of RAM

  Western Digital My Book Mirror 1 t connected USB 2.0

  Windows 7 Edition Home Premium 64 bit (clean install)

  Problem:

  -Won't start if the external hard drive is connected to a USB port

  -Boot freezes, the BIOS detects the drive, shows USB 2.0: WD My Book, fan gets stronger

  Tried solution:

  -Different USB ports

  -Varied, boot order first set internal hd

  -Disconnect and start continues

  -Mouse USB wireless at the same time / plug, unplug, almost worked

  Works okey if hooked up later when Windows has loaded (also works just after when it is plugged in after successful BIOS).

  The closest match: http://www.experts-exchange.com/Storage/Hard_Drives/Q_23769717.html

  Any advice how to solve?

  Message edited by lukevader on 10/11/2009 16:02
  Message edited by lukevader on 11/11/2009 01:37
  Message edited by lukevader on 11/11/2009 01:48

  My conclusion: HP BIOS/USB controller isn't working okey with WD My Book when you start the computer. If you wait about 3-4 minutes, to return to the boot. If you re-create the partition in Windows 7, you might be able to speed up the process. I have converted the MBR to GPT (Google more) and reformatted it NTFS. Reducing a starter and holds a GPT formatted, cannot be a boot disk. Now, there are about 1 min delay. If there is a switch to turn off USB Legacy support, that could help. There is not, thanks to the crappy BIOS HP. You can also seek support from Western Digital and discover interesting things.

  Then, finally, it'll pass the boot.

• HP Pavilion DV7-2270 won't start. Even when it does it stops or BSOD comes up.

  Number and name of the product
  HP DV7-2270us

  Operating system installed
  64-bit Windows 7 Home Premium

  Error message
  Technical information BSOD

  STOP: 0X0000000A (0 X 0000000000000190, 0XFFFFF80003E8C65B, 0 X 0000000000000002, 0 X 0000000000000000)

  Question

  My laptop won't start and when it does stop down suddenly or BSOD screen comes up. My battery died and when the computer starts, it displays a message on this subject. I've updated the BIOS and driver software but could not solve this problem. It is used to run and operate perfectly. Help, please!

  Problem solved! A loose chip (graphics card) has been the cause of all the problems. My laptop works as fine as ever. It was also the problem of previous versions of the laptop dv6/7. So, you just need to check if the graphics chip is loose. If so, welding, it will allow to solve! Good luck!!

• hpdv6000 won't start - error updates configuration? !!

  My HP Pavilion dv6000 won't start.

  When I turn on my laptop it goes through the normal stages of start-up, however it comes up with "configuration updates: stage 3 of 3-0% complete.". Do not turn off your computer.

  It remains on this page for a few minutes with the hourglass of thing going, but nothing happens - it stays on 0%

  The computer then turns off and turns back on again and repeat the process of a second later.

  I can't clear the checkpoint!

  This morning, I thought that it would be alright because instead of going to the screen updates it came with the users screen. I clicked on my profile, entered my password, but then it froze. ??!!??

  So I have held down the power button, it has left a few minutes and turned back on but not luck.

  Continuing along in circles.

  Help... :/

  Hi catMshaw,

  Take a look at the procedure in this document and let me know if this helps your situation.

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• MacBook won't start - completely back screen

  2015 12 '' MacBook

  My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).

  Nothing happens when I press and hold the power button.

  Any suggestions before I take it to the Genius Bar?

  Here is some information that might be useful.

  After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.

  However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye