In summary a list of the controls in a list control?

I have a spreadsheet with 5 columns, the values of each column, 1, 2, 3, 4 and 5. I also have seven rows. In each cell, I placed a list of control box.

How can I get a column to add controls? By example, if I ticked both boxes in the column a value of 3, how I summarize to read 6?

Thank you very much

Michael Kelly

Hi mckelly,.

You can use COUNTIF()

I used the column headers a multiplicand, but you can use just 2-5 in the formula.

Quinn

Tags: iWork

Similar Questions

  • I want to uninstall real player. I went to the control panel to uninstall, but it was not listed.

    Original title: real player not on the list of programs but still doesn't work

    I want to uninstall real player. I went to the control panel to uninstall, but it was listed.  I can always download with real player. What's new? Why is not listed if I can get rid of him.

    Hello

    What operating system are you using on your computer?

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    a. click Startand then click run.

    (b) in the Open box, type regedt32, and then click OK.

    c. in the registry editor, find the following registry key:

    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

    d. in the left pane, click the Uninstall registry key, and then click export on the file menu.

    e. in the export registry file dialog box that appears, click desktop in the list record in , type Uninstall in the file name box, and then click Save.

    f. each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of currently installed programs in the add tool / remove programs. To determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

    Full name: the Display Name key value data the name listed in Add / Remove programs.

    - and -

    UninstallString: The value of the UninstallString key data the program used to uninstall the program.

    g. After you identify the registry key that represents the program that you removed but which is still displayed in the currently installed programs list of add or remove programs, right-click the key in the left of the registry editor window pane and then click Remove.

    Click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

    h. on the file menu, click Exit to quit the registry editor.

    i. click Start, click Control Paneland then click on Add / Remove Programs.

    In the currently installed programs list, verify that the program whose registry key you deleted is no longer listed.

    j. do one of the following:

    o If the program list is not correct in Add / Remove Programs, double-click the file Uninstall.reg that you saved on your desktop in step 5 to restore the original list of programs in the registry.

    -or-

    o If the program list is correct in Add / Remove Programs, right-click the Uninstall.reg file on your desktop and then click Remove.

    For more information, you can check the link below:

    http://support.Microsoft.com/kb/314481

  • Programs disappear from my office and the program from the list but still appear in the control panel

    I use Window XP Home Edition and lately, I've noticed that programs have disappeared off the coast of my office and in the list of programs without allow me to delete them.  Firstly, this came to light when I went to start my virus scan and impossible to locate the icon or in the list of all the programs, but it is in the status bar at the bottom right of the screen. I have since discovered that other software have disappeared and when I will remove and reinstall them using the Control Panel can't do.  And when I tried to back up my data when it came time to burn data on a cd, I got a message asking me to insert a disk. Yes, he asked for a floppy and I couldn't have it burn the disk that was selected at the beginning of the backup.  A couple of days, I got the "blue screen" a couple of times and the computer turns off automatically. Oh yes, one more thing restore to a previous period will not fix the situation. Can someone tell me what is happening?

    Hi LarryFuller,

    It seems that your computer has been infected by the virus or malware. Scan your computer with the Microsoft Safety Scanner to get rid of the same.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • How can I remove a program are not not in the control panel: Add/Remove program list

    How can I remove a program are not not in the control panel: Add/Remove program list? I have a shortcut to a program called "Smart Engine" that pops up right on my desk. I can't find under anything else to remove it. I have remove the shortcuts, but they reappear everytime I restart.

    Smart Engine is a Trojan horse...  If you have MalwareBytes installed, try to run...  If this does not work (and it might because Smart Engine will try to stop it).  Click here for additional removal instructions...

    http://www.Spywares-remove.com/remove-smart-engine-smart-engine-removal-Guide

    --
    Gina Whipp
    2010 Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • I can't uninstall IncrediMail with markets listed in the control panel.

    Original title: impossible to uninstall

    I can't uninstall IncrediMail with markets listed in the control panel. I have Dell Windows Vista

    Hi Anneloye,

    Please use the forum for Support of Vista,

    It's the Q / A about uninstalling IncrediMail site:

    Q: How to uninstall IncrediMail?

    R: to uninstall IncrediMail, simply do the following:

    1. Click the Windows 'Start' menu, scroll to 'Programs', select "IncrediMail" and click "Uninstall IncrediMail".

      Note: When you uninstall IncrediMail, you will lose all unsaved data. It is recommended to backup your IncrediMail data before uninstall, in case you want to use it later.

    2. Select the option "Uninstall IncrediMail" (marked in red) and click 'Next' (marked in blue). When asked to verify the uninstallation process, click 'yes '.

    3. Once the uninstall is complete, reboot your computer.
    4. Navigate to: C:\Program Files\IncrediMail.
    5. Remove the 'bin' folder to completely remove IncrediMail from your computer.

    Hope this helps,

    Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot remove the flash drive in the list recently opened in the control panel

    I tried to erase all files recently opened in the control panel taskbar icon. But I'm unable to remove flash player from the list. Can someone help me how to remove it from the list.

    Screenshot attached

    Normally if you want to clear this history of jump list, you can do the following:
    1. right click on the Start button and click on "Properties".
    2. under the "Start Menu" tab, uncheck "Store and display recently opened items in the start menu and the taskbar" to turn it off.

    If you are still unable to get rid of the recently-opened items, try to delete the history of list of jump, which is stored in the following location:
    C:\Users\\AppData\Roaming\Microsoft\Windows\Recent\AutomaticDestinations

    That should certainly erase the jumplists, but if the problem persists, check the below link for further troubleshooting:
    http://www.thewindowsclub.com/clear-taskbar-icons-jump-list-history-Windows-7

  • xbr65x900c and HT-CT790 no sound, showing not not under the list of the bravia sync devices and not under the control of home theater

    I just bought a bar of his Sony HT CT790 and I'm trying to connect it to my TV Sony xbr65x900c, but it does not work.

    I have connected the HDMI ARC at both ends and verified that the menu of the bar of its manifesto in hdmi 4.

    I even updated the sound bar to the latest firmware and checked the TV is updated too, but the bravia sync devices list doesn't show any connected device and the control of home theater is not any device, and my sound bar is not listed in the supported audio system (HT-CT780 shows under is supported) This means that ht-ct790 is not taken in charge?)

    Help, please

    OK it's fixed! you won't believe how!

    Instead I used a HDMI cable, that I got with my xbox one and it worked!
    Also the bravia sync works and home theater!

  • On windows xp profesional no axcess my programs to remove one of them. In the control panel everything he says is list is filled and does not work.

    I can't axcess my programs via the Control Panel, which said that the programs being filled.  They appear donnot.  Operating system is Windows XP Professional service pack 3.  Thanks to any one that can help.

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Make the SFC (System File Checker) scan and see if the problem occurs.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    Hope this information helps.

  • How can I uninstall the old version of java 2 runtime environment (H.E. v1.4.2) when it is not listed in the Add/Remove Programs section in the control panel

    Java shows that I have an old version of Java installed.  I can't see to find this version anywhere.  I can't remove it, if I can't find it.  I looked in the Control Panel, under Java and everywhere else I could think of.  I removed something with the hotfix from microsoft, it shows the old version as Java installed on my computer.  Help!

    Try my computer, search, chk the box to search for files, search for downstairs,

    more options, chk boxes, search for system files, hidden files, etc. We could

    In addition, open C:, file open windows, scroll to the folder.

  • Incomplete information for the programs listed in the control panel

    In the Control Panel, some programs have no comprehensive information.  For example, some are missing the date of installation, some lack the amount of data, some are missing the Publisher.  Many programs have the name only.  When I highlite a line with incomplete information, I not give me the option to uninstall/change ("uninstall/change" is not at the top of the page, click the action to perform).

    Hi Richerich,

    Only programs that were written for Windows will appear in programs and features. Check the documentation that came with your program, or go to the manufacturer's Web site. Most of the programs moved into the C:\Program Files folder.

    Troubleshoot installing or uninstalling programs

    See also the below article from Microsoft kb for more information.
    Incorrectly, Add/Remove Programs tool displays installed programs
    In the above article, it mentions that it is for Windows XP, but it also applies to Windows vista.

  • I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

    Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

    Is there an action actually uninstall Highlightly your list of extensions instead of disable?

    One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Satellite P100-160 BT icon appears in the Control Panel, but no BT

    Hello

    I have a Satellite P100-160. I am very confused as to whether I have BT or not.

    * Reasons I thought that I had BT: *.
    I thought originally I had, because in 'Control Panel', it has a Bluetooth icon, which when I press on it opens the "Bluetooth devices". I also use WiFi I thought a sign that BT has been installed and working. I also notice that in Services' there is that something called 'Toshiba Bluetooth Service' running.

    * Reasons I think that now I don't have BT: *.
    However, when I press Control Panel > Bluetooth devices > Bluetooth settings, nothing happens. It's as if the button is dead. And when I try to 'Add a BT device', he finds not all devices. In addition, there is no BT listed in Device Manager.

    .....

    Overall, I am very confused! I bought yesterday wireless speakers after seeing the BT icon in Control Panel (I had read that if this icon was there, I got BT), but having struggled for hours trying to get BT to work yesterday, I came to the conclusion that I don't have BT at all!

    Could someone explain what it means the Bluetooth icon in the control panel? Why is there if I don't have BT? Or, the icon means I have BT but am doing something wrong?

    Thanks in advance! Very frustrated!

    David.

    > Satellite P100-160. I am very confused as to whether I have BT or not

    Satellite P100-160 was NOT equipped with Bluetooth module.
    But maybe the battery BT software has been installed and is why the BT icon is visible in the control panel.

  • Missing audio device of the control panel.

    Several days ago, I opened the control panel to troubleshoot an audio device. The Control Panel showed two audio devices:

    1: ATI PNP
    HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & B0AB116 & 0 & 0001
    Driver c:\windows\system32\drivers\atihdmi.sys (7.11.0.7703, 114,00 KB (116 736 bytes), 02/09/2010 12:34 AM)
    2: REALTEK PNP
    HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A92 & REV_1002\4 & 19 19054 & 0 & 0001 c
    Driver c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.6196, 2.37 MB (2 484 072 bytes), 07/09/2010 12:27)

    Both devices are still listed under system information/system/components tools, but:

    At some point during the configuration of the device from Realtek, ATI device disappeared from the control panel. Since then, I have found no way to adjust its properties, much less put on the control panel.

    The only other change observed: formerly the computer sounds internal (startup, error, stop, etc.) remained internal. Now, I can hear them through the external speakers - acceptable but not optimal.

    Any help would be appreciated.

    Milt

    Hello

    Could you post back with the full or part no of your PC model No.  Also, could you confirm the operating system you are using.

    Another thing to check is in the meantime.  Windows Control Panel, open Sound, right-click in an empty area of this window and check "Show disconnected devices" as «Show disabled Devices»  Another thing now appear?

    Kind regards

    DP - K

  • Programmatically disable the controls on the front panel

    Hi all

    I have a case in which I need to activate the control of front panel during scanning or taking data and when this case is false / when not not taking data. I try to make the Subvi usng vi reference, the node property, making the label controls and disbaling it. I want to disable the control listed in the table during the real deal and allow them to return to the case of fake. But right now, it of not working and hangs my main program. Please see the vi attached and help find where I am doing wrong.

    Thank you

    The best way would be to create an array of references to the controls you want to mess with beforehand.  I say that because I'm guessing that you have several groups of controls you will be turn on/off at the same time.  If you have a table of these controls already created, then just run the table in a loop FOR and use the Disable property.  I made a few minor cleanups in your current VI.  I got rid of the outermost case structure since the two cases are essentially the same thing.  A selection function allows to choose to enable or disable.

    NOTE: the forums are screwing again and not let me post a VI.  Change the extension back to vi to open it in LabVIEW.

  • How can I get the control specifies a reference (by the script)?

    By what method of property can I control that specifies a reference? (See an example of a reference to the code snippet).

    When I reference (ControlReferenceConstant in the script), I can't get control of the reference points to. I guess it's done with the property ' reference control bound to. " But I don't know how to convert the variant to the control. Conversion to the control class does not work. (See excerpt below). Conversion does not return an error, but the reference is not valid.

    A few details: the variant contains a reference to a control and has a name matching [2]. The type of reference data is just as well [3]. But the reference is 0, which is of course invalid digital show (seen in the probe and indicator).

    An entire book would be to iterate through all controls (indicators included as well as items in clusters and berries). The label could be the first check. But because they do not have to be unique is not enough. As a second step could be verified that the ReferenceConstant is listed by the property "nodes of control."(delede contrôle) reference ".

    [1] LV12 helps ControlReferenceConstant properties:

    http://zone.NI.com/reference/en-XX/help/371361J-01/lvscript/controlreferenceconstant_p/

    [2] get the variant name with:

    Select 'Type of Show' in the context menu of indicator varying or

    OpenG VI 'get name of data '.

    NIs in \Utility\VariantDataType\GetTypeInfo.vi VI

    [3] get the Refnum Type in the variant with

    NIs in \Utility\VariantDataType\GetRefnumInfo.vi VI

    If you look at using the property, you will see that it actually returns the data type of the node, not the actual control. That's way, you cannot use the reference in variant - it's not a real reference to a control.

    I think it's all just an oversight that no one added to the relevant property to the node, but there is a simpler solution for you that I think should work, that should come to him on the other side - for each control in the public Service, get the property [] of control reference nodes and it look for the reference of your node. If you found it, the node made reference to this control.

  • ActiveX - Get a reference to the control

    Hi all

    I need raise a value change event in a VI ActiveX of LabVIEW interface.

    To do this, I think that I need to retrieve the reference to the control and then use the (signalling) Value property of this control.  Does anyone have any idea on how I could get the reference to a control through the ActiveX interface?

    Any other suggestions on how I can trigger a change of value programmatically event are certainly welcome.  I tried the 'SetControlValue' call function but that does not raise the value changes.

    Thank you

    Zach

    I don't know if I understand, but it looks like you are trying to control LabVIEW via its interface ActiveX from another program, such as C. In order to get the reference to a control so that you can access the value property (signs), you must first access reference front panel of the VI and then get the list commands (which is an array of references). You can walk through this table until you find the one you want, and then set the Value property (signs).

Maybe you are looking for