In the code of CVI full function teststand

Similar Questions

• How to get the result of the test of CVI DLLs in teststand!

  I write a driver dll to test a source, I want to get the tension of world SERVERS (the instrument of the RS) and I used to call DLLs that written by CVI, teststand

  My question is what is the best way I can get the result of the test and show the user to teststand. the code below is fair? When I used to call this dll document, teststand

  "" I just get the result by setting in TS.this is a good meathod, and what should you do in teststand, I put the "outputVoltageV" point to an object?

  /*===========================================================================*/
  / * Function: read voltage/current output * /.
  / * End: this function returns the output and actual output voltage * /.
  / * current instrument.                                      */
  /*===========================================================================*/
  ViStatus _VI_FUNC rsngsm_datReadOutput (ViSession instrSession,
  ViPReal64 outputVoltageV, ViPReal64 outputCurrentA, ViPBoolean statusPeakCurrent)
  {
  ViStatus rsngsm_status = VI_SUCCESS;
  Bruno buf [BUFFER_SIZE];
  ViInt32 retCnt;
     
  FMT (buf, "%s<>
  If ((rsngsm_status = viWrite (instrSession, buf, NumFmtdBytes (), & retCnt))<>
  Return rsngsm_status;
         
  If ((rsngsm_status = viRead (instrSession, buf, 50, & retCnt))<>
  Return rsngsm_status;
  If (Scan (buf, "%s > %f [p2];")) %f [p2]; %i [b2] ", outputVoltageV, outputCurrentA, statusPeakCurrent). = 3)
  Return rsngsm_status;
         
  Return rsngsm_status;
  }

  sean_tan,

  Yes, you just pass a value of digital TestStand (e.g.; locals.number).

  If you use the adapter of the ICB, it might make more sense that you can use the Flexible DLL adapter for this type of function, that you do not use the standard settings of tTestData and tTestError. While TestStand will correctly recognize the function prototype, you want to make sure you that include the type library of your function Panel (you will need to create one if you have not already done so) in settings target of LabWindows / CVI-> type library.

  I hope this helps.

  -Jack

• CVI 8 has problems with the code of CVI 2009 - why?

  I use NI CVI 2009 and thus programmed. Now, I bought 8 CVI and wants to continue programming. But CVI reports errors in the source code of the ICB 9 and I do not understand what is the problem?

  example of

  char save [size + 1];

  Erros

  128, integer 22 should be constant.
  ...

  What is the problem with this simple line of code that worked perfectly before?

  Unfortunately the statements of variable length arrays is a feature of c99 is supported in CVI9, but probably not in version 8. If you use CVI8.5, you can try to add this pragma at the code and see if that fixes the problem, but according to this list of features posted by Luis, I'm not positive in this regard:

  #pragma iso_9899_1999;

• What is the code for looping a clip backwards?

  I would loop a front clip and back by clicking a button front or rear.  I found the script code 3 following actions on Adobe, but the code that plays the mc in the opposite direction is not triggered by a button.  Can someone find me the code requiring the user to hit the reverse button for a mc backwards in a loop?

  Here is the code to play forward:

  function playAnimation(event:MouseEvent):void
  {
  star_mc. Play();
  }
  Save the function as an auditor with the key.
  startButton.addEventListener (MouseEvent.CLICK, playAnimation);

  ________________

  Here's the code that automatically plays the mc in reverse but that is not triggered by a button in the code above:

  This function is called when the enterFrame event is triggered, which means
  It is called once per frame.
  function everyFrame(event:Event):void
  {
  If (star_mc.currentFrame == 1)
  {
  star_mc.gotoAndStop (star_mc.totalFrames);
  }
  on the other
  {
  star_mc.prevFrame ();
  }
  }
  star_mc.addEventListener (Event.ENTER_FRAME, everyFrame);

  
  

  I need code that will play before in a loop and play backwards in a loop and triggered by the buttons.  Please help...  Thank you

  Apart from the function that performs the actual reading reverse, you need a button that tell the movieClip to run the "reverse code" each update of the framework.

  Suppose you have a button named reverseButton. When you click on it, copy the following code calls the function 'playAnimation', which tells the movieClip with instancename star_mc to run the code you already have.

  function playAnimation(event:MouseEvent):void
  {
  star_mc.addEventListener (Event.ENTER_FRAME, everyFrame);
  }
  Save the function as an auditor with the key.
  reverseButton.addEventListener (MouseEvent.CLICK, playAnimation);

• How to connect the parallel test using the logarithmic function Teststand database result

  Hello

  How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database

  I use Labview 2013, 2013 Teststand and sequential model.

  The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.

  Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)

  TKS

  
  

• How to insulate the wait at some of the code function

  I'm building a system to applaud ecg with an external Stimulator using TTL of programming impulses to work along the side of the information obtained from the ECG. The most important of these features is the heart rate. However, whenever I activate my pulse trains in the code, the function DAQmx wait until Done.vi made a break measure everything in the code, including the part of my code that monitors heart rate, which uses time to for. What I would like, is the wait function only affects the pulse train generators without a break anything else in the code. Is this possible? And if so how can I get there?

  I will attach my vi

  Your problem is that everything is in the same loop.  If the longest operation is going to determine the flow of the loop (and therefore rates of treatment).  What you really need to do, is to separate tasks on separate loops.  Use of queues or notifiers to communicate your data and commands between the loops.

• HTML5 reference code works is not inside the Javascript on DW CS6 function

  Hello

  I'm working on Dreamweaver CS6 and indicators of code does not work as expected when you write Javascript code.

  The minute that I insert a code hinting feature no longer appears the HTML5 elements.

  

  Should I remove the function then him reappears indicators of HTML5.

  

  How can I get the code referring to work when I add in the function?

  Thank you

  Herman

  Thank you for reporting this issue, Herman!

  We have recorded a bug for it and you're tracking internally.

• Why the function "Insert an Image" does not insert the code at the location of the cursor?

  I mainly work with php files and I'm still working in code view only.  I am editing the php files that I wrote using a different code a few years ago Editor.  I place the cursor to the place in the code where I want to go the image tag and use the menu "insert an Image".  The code is then placed directly under the < body > tag.  It is always placed in the same place no matter where I place it in the code.  Can someone tell me what is happening here?  Thank you.

  Not sure why it does not insert the image where the cursor is, but my workflow is much easier. I mainly work in code view and I will drag the image from the files Panel to where I want to in my document. Simple

• comment in the code mode function does not

  I have a document saved php and for some reason, I can't comment on a line or group of lines in the code section? Anyone else having the same problem?  What could be the reason of such a thing?  This is not the first time that this has happened.  I once had the same problem and had to stop dreamweaver and start it back and the functino comment was working.  Now I've been home for 2 hours trying to figure what's not switching on and stop and still does not work.

  Thank you.  After getting up this morning with my first cup of coffee, I opened my document and for some unexplained reason, I was now able to insert comments on the side of the code.  This problem has happened already about 2 weeks ago. It has come and gone on its own after restarting a few times.  I'll keep your link in a safe place and more closely if it never happen again. Thank you very much

• Launch a LabVIEW VI to the background of CVI

  Not sure if this is better posted in the LabVIEW or CVI forum...

  I need to start a LabVIEW VI "in the background" of the CVI.  In other words, I need to call a LabVIEW VI (which is embedded in a DLL) of CVI and have the function call immediately, while the VI called end of running in the background.

  I've had success making this kind of asynchronous call of in LabVIEW using an asynchronous start node name.  This works because it is supposed to: the node of the asynchronous call ends the execution immediately, while the called VI runs in the background.

  The problem arises when I integrate this into a DLL and call from the CVI.  If I build the DLL with active debugging and then walk through the code, stopping the code just after the asynchronous call, the background VI runs correctly.  But if I run all this full speed, the asynchronous VI does not run.

  I guess that the call of the DLL returning before the asynchronous VI can finish, the asynchronous VI is killed during the call to the DLL returns.  Obviously, I need the background / asynchronous VI ends once control is returned to the CVI code.  Am I doing this wrong?  Is there a better way?

  My code is highly integrated and probably not useful to publish.  If this could help write an example isolated post, I'll do that, but only if others cannot identify a better/different approach.

  Thanks in advance,

  Joe

  Hey JoeDG,

  Yes, as Evan mentioned in the thread you referenced, it's a feature of LabVIEW. As he says, for the ongoing enforcement there must be at least one open front. While I understand that this causes problems for the screws that are run without front panel, it seems that the workaround that you put in place is the best way to go. I apologize that you had to take an indirect route to achieve your final goal, but I'm happy that things are facing up and running for you now.

  Best,

• How to access the attributes of an object using TestStand. ?

  Hello

  I have a class named status in c# that has 2 data members. There is another class named parameter and it has functions that return objects of type status.

  I did the DLL from the parameter class. Then I added this class to NI TestStand and calls a function and this function returns an object of type status.

  Is there a way by which I can access the data members of the object returned in TestStand?

  Thanks in advance

  Yes, there is another alternative. If you state a value type (i.e. a struct in c#) then you can tell teststand to store it in a corresponding data structure TestStand rather than an object reference variable. It works even for the private fields in your structure. To do this:

  (1) first to report a type value and no matter what other changes are needed in your code to take account of this (value types are copied when it is passed by value to another method, if this isn't what you want you will have to pass by reference - i.e. the c# ref keyword).

  (2) recompile your assembly.

  (3) in the specification of module Panel TestStand .NET, you should now see a new button next to the expression for the return value of type status resembling TestStand data type icon. Press this button and it will prompt you to create a TestStand custom data type that matches the type .NET. Select this option to save the type in the type palette file MyTypes.ini. Just do it once. Once the type is in your palette file type MyTypes.ini it will be available then and you must only update if you change the type .NET.

  (4) create a local variable of the TestStand Custom data type instead of the object reference. Note that you can expand and see the properties under.

  (5) use this new local variable to store the return value of status. TestStand will be copy/update the properties of the variable to match those of the .NET structure that the method returns.

  NOTE: You can also simply store the fields of a struct in separate variables increase the return value of type status once it is a struct and specify a separate variable for each field instead of creating a custom data type TestStand.

  Don't forget that TestStand makes a copy when you store a struct that this way replaces the struct when this will not appear in the copy.

  Hope this helps,

  -Doug

• LabWindows CVI Full recommended OI does not start

  I made an installer of deployment Teststand-2013. On a target PC (Windows 7 64-bit) it works fine. But on another target PC starting the Labwindows/CVI Full IO recommended (attached screenshot) fails with an error-145 when trying to load testexec.uir. Both targets have Windows7 64-bit and Office 2010 installed. How will I know what ActiveX control is missing or damaged on the second PC?

  I found http://digital.ni.com/public.nsf/allkb/9894BE2B832B7FDE86256ECD00041172. But the Office is installed, and ActiveX Control Pad is obsolete and incompatible for Windows7 64 Bit and is no longer available from Ms.

  mkossmann,

  You can use the option "Hide the license dialog box" on the Installation Options tab. This will not prompt the user to activate TestStand until they try to open the software after installation. What is the desired behavior?

• best practices for the structure of the code control multiple devices in a sequence-step 2

  I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed.

  I run an experience in which I order 2 NI PCI-6733. I will soon add a Tektronix AFG 3022 B and have long been turned off the opportunity to rewrite my code labview from the ground upward. I inherited from a previous search, and although functional, I want to make it easier to modify and divide into sub - VI and these. Link to the current program (labview 8.6.1) is here if you do not want to see the code that is currently used and Subvi is in a zip file. The current version of experience consists of one stage, all writing the data for PCI cards is saved for the end. I need to change that in my configuration again well.

  The new experience consists of 2 steps. The first will take place (loop an array of output for PCI cards) until he heard a 'real' another computer (connected via TCP). When you do that, it should go to step 2 and run a sequence (usually 10 ^ 5 timeunits of length, where the unit of time is 0.1 ms) which refers to two PCI, the AFG 3022 B cards and with the flexibility to add more devices in the future.

  The most popular would be structural advice. How to organize the screw, if it's good to use a VI 'master' that would control the two sub - VI phase 1 and 2, etc...  Feel free to ask for more details if it helps clarify my question. Thank you!

  Such programs typically use a kind of State machine.  You will find many tutorials on LabVIEW state machines in these forums or forums of LAVA.  If you do a rewrite, I also recommend that consider you the LabVIEW classes.  They help modularize your code and do more reusable subparts.  You can end up with less to maintain, accordingly.

  You can also consider TestStand.  It was designed to perform sequences of tests, so can make your life easier.  It would be also exaggerated gross.

  Let us know if you encounter any problems with the machinery of State or classes.

• An urgent need to change the code PIN, don't want to factory reset

  Hi all

  A few weeks ago, I accidentally dropped my Xperia Z3 Compact on the ground. The damage was not serious, apart from a few scratches on the screen, at least, I thought. It turns out that the damage was much more than just some scratches: a few hours later, my touch screen started acting weird and finally the half top of the touch screen is not functional, as in the screen still worked, but I couldn't support what either on the upper part of the screen.

  You guessed it already: my PIN contains the number 1, and on the unlock screen, the number 1 is on the upper part of the screen, making it impossible for me to enter my full pin code. I want to reset the pin code, but I don't want my lost data.

  Things I've tried:

  -Device android Manager: everything is functional in the SMA: location works fine, I can ask a ring and I can probably delete my camera as well, but I have not tried. When I press the "Lock" option on the other hand, it does not work. I have a password on my PC and confirm. He invites even "Lock request successfully sent" or something in that direction, but when I look at my phone, nothing happens. When I try to enter a new password, it invites "since Google has verified that a screen lock is already set, the password you entered is not necessary." Looking at my phone, nothing happened.

  -Enter the code wrong PIN several times to connect with my Google account: I think it is already patched, but I tried anyway. My phone is locked for 30 seconds every time.

  Google search gives thinking I should factory reset my device so the PIN will be removed, but I got precious files on this phone, and not on a SD memory

  Would be just to back up my whole phone on a PC and factory reset it, but I can't access the files of the phone while it is locked.

  If anyone has a solution for my situation, it would be much appreciated.

  Thanks in advance

  Connect a USB mouse via the otg cable and use it to unlock.

• finalize the code after the conditional

  Hi all

  I am a beginner I have this code and I'd like to finish according to parole but do not know the command to do so.

  var docRef = activeDocument;

  selectedItems var = app.docRef.selection;

  If (selectedItems.lenght < 1) {}

  Alert ("no object is selected.")

  }

  Could someone help me?

  Ferrarezzi

  Hope this helps:

  var document = app.activeDocument;

  var selecionados = documento.selection;

  If (selecionados == null) {}

  Alert ('pre Nada")

  };

  Abraços!

  Em segunda-feira, 11 November 2013, Ferrarezzi escreveu:

  finalize the code conditional function created by Ferrarezzihttp://forums.adobe.com/people/Ferrarezzi> in * Illustrator

  Scripting *-discover the full discussion onhttp://forums.adobe.com/message/5831816#5831816