In the computer management disk management hangs when it is activated

Similar Questions

• My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

  My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

  Hello gargoyle28m,

  If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm getting follwing error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I'm getting follwing error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  MSVCR100. DLL is part of C++ 2010.  You need to reinstall that.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84&displaylang=en

• I need to disable my CC on a single computer, but the grave Manager crashes when I try to do. How can I work around this problem?

  I need to disable my CC on a single computer, but the grave Manager crashes when I try to do. How can I work around this problem?

  Try the 2nd link

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Not able to see the contents of the computer management it gices a snap - in error.

  Recently, I had some problems on the computer. So what I did, this is what I do sometimes normally when it is not noticeable.

  Open the windows system event logs just to see if there are some errors arise in there.

  The problem is that, with this time is that I somehow clicked on disk management. I don't have (just woke up) how but when it was still loading so I immediately clicked on where the event log was until I received a notification that did

  Snap broke down, and I think that the FX error message: {b05566ae-fe9c-4363-be05-7a4cbb7cb510}

  My question is:

  Is there something I need to do? Should I be worried because it could have happened because he was still loading disk management? I return to the computer management and it doesn't seem to be showing normally, but I didn't click on anything anyone, just in case.

  As you can probably tell by here, but I know something but certainly not entirely savvy computer especially on Windows

  Thanks in advance!

  You can access the observer of events directly from the command run:
  http://www.Windows-commandline.com/Windows-Event-Viewer-run-command/

  Select Start, run, type eventvwr , and press the ENTER key.

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn

• How to access the computer management?

  Original title: computer management concole restricted by policy
   

  How to enable access to the concole menagement computer which is limited by the policy snap-in?

  Hi Nikola Dragutinovic,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you do not want to activate the computer management console, which is limited by the policy snap-in. I'll be happy to help you with this problem.

  The setting of group policy to restrict users to the explicitly permitted snap-ins list lets you selectively enable or disable the Microsoft Management Console (MMC) snap-in. However, before enabling this setting, you must activate the settings in the folder "restricted/permitted snap-ins" software snap-ins MMC that you want to use.

  I suggest you to follow the steps from the link and check if it helps.

  You must enable explicitly pluggable MMC that you want to use before you enable the group policy setting "Restrict users to the list of snap-ins explicitly allowed" in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/931865

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Help? I paid for a subscription for 1 year at CC and downloaded fine on my iMac desktop, but no InDesign download not on my MacBook. I installed the app manager and when I click on download, it's right there saying 'Download InDesign now.'

  Help? I paid for a subscription for 1 year at CC and downloaded fine on my iMac desktop, but no InDesign download not on my MacBook. I installed the app manager and when I click on download, it's right there saying 'Download InDesign now.'

  Hello

  Please see - download and install Adobe Creative Cloud applications

  You can browse Download Adobe Creative Cloud apps | CC free trial Adobe to download the creative cloud desktop application.

  After you download the creative cloud desktop application, you can download InDesign CC through it.

  Kind regards

  Sandrine

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• Problem with disk on the computer management.

  Hello Sir,

  I get my phone by using the dell recovery, but after the end of the recovery. My volume (E) again a disk partition has been converted to the OEM Partition due to that I can't see and access this drive so please help me to get my all data and access this drive. Please tell me hoe to convert this OEM in main partition.

  Hello Paresh,

  Thanks for posting us at Microsoft Community.

  After my research, if you perform a factory settings on the computer then all data will be erased.

  Please see the note referred to in the link of Dell Support.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/kcsarticles/ArticleView?docid=608277

  Unfortunately, it is not possible to recover data if you have a recovery system to factory settings.

  However, you can use third-party online software to recover lost or deleted data.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope that the information provided is useful. Let us know in case you need more help.

• Drive C does not appear in the computer management window.

  Hello

  In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.

  What gives?

  Thank you

  Hello

  Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.

  a. Click Start and then click Run.
  b. now, type cmd in the text box and press on enter to open the command prompt.
  c in the command prompt, type diskpart.exe press ENTER.
  d. Enter the following command in the utility diskpart and press ENTER:
  the list volume

  Check if drive C appears in the list.

  See this article for more information about the Diskpart utility:
  http://support.Microsoft.com/kb/300415

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• Open the file does not close on a remote computer through the computer management console

  I try to use the MMC snap-in computer management to connect to a remote computer that contains our shared documents to close an open file on the remote user's computer.  When I right click and select open close file, it seems closed in the MMC console, but the document is still open on the user's computer.

  Why does not close the file?

  Hello

  Please post your question here for assistance with the MMC snap-in:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• My seagate is full I got it. How do I put on the computer? It will crash when there is no more space to download what I did on my computer? How can I download it?

  my space (seagate) is full, so I unplugged it.  If I plug it back, what happens to the things that I've done that will have no place for
  be saved?  How can I empty the seagate?  I put a lot of things on the usb port or making a record, but I'm afraid to plug it in.
  Help!

  Hi Doris Foster,

  1. what operating system is installed on the computer?

  2. What is the free space on the Seagate drive?

  3. What is the size of data directory that you are backing up?

  You can move the data from the drive Seagate to another computer so that little space is released that will help you to start the backup.

  You can use the cut and paste to move that the Seagate drive files to another computer.

  Follow these steps:

  1-connect you to the user on the computer account.

  2. in the "Start" menu, click on "Computer" to open Windows Explorer. Connect the external drive Seagate.

  3 - Click the external hard drive, and then navigate to a folder with the files.

  4 - hold down the ' CTRL ' button on the keyboard and click a file to select several files. Otherwise, press on "Ctrl + A' to select all files in the folder.

  5 - Click on the "Edit" menu and then "Cut," in Windows Explorer.

  6. operating instructions in step 2 to open the second instance of Windows Explorer.

  7 - click on another icon of the hard disk, and then browse to a folder where you want to place the selected files.

  8 - click on the menu "Edit", then "Stick," in the Windows Explorer to move the selected files.

  I hope this helps.

• Disconnect me, and the computer goes to sleep. When he wakes, he is recorded in a user account.

  I am the administrator. After the use of the computer, that I log out, and after a while the computer sleeps. When I move the mouse or press any key to wake up the computer, it is saved in a non-administrator user account. Why would it be? I have Vista Home Premium Service pack 2. There are two accounts of users with an administrator account. One of the user accounts is that connects itself whenever I log out of the administrator account.

  See if this tutorial can help you. It shows you how to enable or disable the automatic connection.

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  (Note: skip step #4)