in the Device Manager the multimedia controller has a yellow triangle,

Similar Questions

• Pavillion DV-2001TX: I can not find the diver of the multimedia controller

  I can't find a driver for the multimedia controller on Win 7 64 bit for a HP Pavilion dv6-2001tx.  The information I have in Device Manager are:

  "Multimedia controller".

  Type of device: other devices

  Manufacturer: unknown

  Location: PCI Bus 4, device 0, function 0

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  Help me please.

  Thank you.

  Hello:

  Maybe that's...

  This package provides a TV Tuner driver for laptop models supported and operating systems.

  File name: sp45500.exe

• How to restore the multimedia controller and multimedia video controller to the system?

  How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?

  Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.

• "The relationship of trust between the Client and the domain controller has been lost."

  I had a client PC connected to a DC running 2003 SBServer.

  It was this error when he tried to connect with its domain account.

  "The relationship of trust between the Client and the domain controller has been lost."

  I had to connect as Administrator local and leave/re-join the domain with a different machine name.
  How can I fix the side Server?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below and validate the request.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope this information is useful.

• Why the vsphere cluster hosts have yellow triangles?

  I created a cluster with two hosts vsphere vsphere 5 in vmware workstation 7 similar to this demo.  http://Vimeo.com/7560591

  Everything was going well until I created the cluster, active HA, DRS, etc.  Now, I have these yellow triangles on the hosts, but no alarms.  The general summary information are also all zeros.

  See attached picture.

  Has anyone any suggestions?
  

  No problem.  You can ignore them.  For the network, they see this - http://kb.vmware.com/kb/1004700.

• My acer crystal eye webcam has a yellow triangle

  Original title : my acer crystal eye webcam want workit say its compateble and I do not how there to remedy can anyone please help me

  It has a yellow tryangle on the script, I can't make it work please help me out... good.but Word up...

  Hello

  -Don't you make changes to your computer, after which the issue started?
  -A Acer crystal eye webcam work much earlier?
  -What operating system is installed on your computer?

  Assuming you are using Windows 7, I don't see Acer driver updates; and compatibility with Windows 7 does not list that compatible webcam as seen HERE.  You can, however, try to install the Vista drivers and run it in compatibility mode of Windows. However, there is no guarantee to this method.

  You will need to contact acer to get help.
  http://Acer.custhelp.com/app/answers/list

• OBIEE 11G - layer physical attributes has a yellow triangle next to th

  Hello
  
  What it means if there is a yellow triangle next to some of the attributes in the physical layer.
  
  Thanks for your time and your help.

  Hello

  It indicates a serious problem with an object that requires the attention of the user (for example, an object must be edited or deleted)

  Please indicate if this can help

  Thank you...

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Renesas USB3.0 Host Controller disappears from the Device Manager

  I recently installed a USB3.0 PCI-E card in my computer (Renesas uPD720200 USB3). The problem I have is that the host controller keeps endangered since the Device Manager, and then I can't use the USB ports. I use Windows 7 64-bit. It disappears usually when I stopped for an evening and then start up the next day and he disappeared. If I just have it reboot normally disappears, but sometimes remains. If I leave the computer and let it go to sleep, when I wake up, the host controller has disappeared. I tried some troubleshooting steps are based on research on google and the answers to this question: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/renesas-usb-30-driver-continuous-uninstalls-from/ac6b1137-1778-e011-8dfc-68b599b31bf5?auth=1&page=2

  If I uninstall all controllers USB host and reboot, the host controller reappears, but only temporarily. The next time I start up it went again and I have to repeat the process (uninstall all host controllers and restart).
  Once or twice I could make it reappear after running the utility of hardware troubleshooting (Panel-> Troubleshooting-> Hardware and Sound-> configure a device), but it is not reliable and I'm usually better off just uninstall all host controllers and reboot. Regardless of if it works, the store always gives me the message "hardware changes may not have been detected", and when I look at the details it says "configured to never install drivers from Windows Update. " There is no question."
  I've updated the driver. I downloaded the Version 2.1.28.1 of the Intel Download Center (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19880/eng/USB3.0_allOS_2.1.28.1_PV.exe&lang=eng&Dwnldid=19880). It seemed to install fine, but Device Manager shows the driver version is 2.1.28.0. Repeat the installation produces the same result.
  I updated the Firmware (http://www.station-drivers.com/page/renesas.htm) and that seems to work very well, but didn't had no bearing on my problem.
  I would be really grateful for any help or suggestion.

  Hello

  Adding to the valuable suggestion of Josh-H, I also suggest you to run the FIXIT and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• HP 630: error device Device manager see the two

  Sir Help My Device Manager Find Me this driver display yellow error on two devices. I had to download driver hp site but not installed driver. "Open popup" does not meet Minimum system requirements.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55085.exe

  and

  FTP://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58429.exe

  Otherwise please use following instructions to get hardware id missing then return:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• Satellite A105-s4064: where to find the Ethernet controller (LAN) driver?

  Hello, I was recently forced to reformat my Satellite A105-s4064 due to some virus problems, and now when I look at my device manager my Ethernet controller is not installed.

  I checked the main site and they don't have an Ethernet controller I've ever seen.
  I can just be giving on it or research in the field of evil, but anyone know where I could find the Ethernet Controller driver for my laptop?

  Thank you
  Chris

  First of all, it would be interesting to know which driver LAN do you need? XP or Vista

  Second, the A105 laptop is an American series. I know that because of the last digit in the model number. 5 at the end means that it is a series that was designed for the American market and you need to find the drivers on the Web from Toshiba site we!

  However, if I understand correctly, you have already activated the Device Manager and the network card is not in the network adapters. There is an unknown device. Am I wrong?

  Often the LAN chip must come from Realtek. Then maybe you should try to download the driver directly from the Realtek page.

  Check it out

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Xbox 360 controller not working not not windows 7 (detected in Device Manager, still does not)

  What I have
  Xbox 360 Wireless Controller (with the cable that allows you to connect it to the photo that is wired)

  This my problem
  I connected the Xbox 360 controller to my pc via the cable, it is detected in Device Manager as 'wireless controller xbox 360 Via play & charge kit.
  In respect of game controller does not appear even when you click advance to selected the device it does not always show upward.
  I tried to use it TI a game it does not at all.
  The rings on the Xbox 360 controller lights when I plug the controller in my pc (even though Device Manager detects a problem with)
  When I press the button the controller guide, it just keeps blinking as if it must be syc (but it connect through a wire that shouldn't happen)

  I tired using different drivers the same problems, I was installed the drivers off Windows 7 support site exactly the same problem...

  I also tried unplugging all the USB devices on my computer and plug the controller Xbox 360 on USB port which are directly mounted on the mother exactly the same problem.

  Up to now NO solution.
  Please help me because I think I got tired of everything I can

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

• Multimedia controller HP dv7 2111tx Win 7 x 64

  Hi all

  I had problems with the multimedia controller since I've updated for win 7 x 64

  I would like to know if someone the other has a solution for this problem.

  Thank you much in advance.

  The values contained in the hardware ID tab in Device Manager:

  PCI\VEN_1131 & DEV_7160 & SUBSYS_0A551461 & REV_03
  PCI\VEN_1131 & DEV_7160 & SUBSYS_0A551461
  PCI\VEN_1131 & DEV_7160 & CC_048000
  PCI\VEN_1131 & DEV_7160 & CC_0480

  It is the object of physical device name:

  \Device\NTPNP_PCI0025

  Hello:

  It is probably the driver you need, based on the hardware ID you posted.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76179-1&cc=us&DLC=en&LC=en

• Re: Satellite P200-PsPB3C-BB808C cannot locate * multimedia controller *.

  I just upgraded laptop Toshiba on Win 7 neighbors following a bad fall of Vista.
  It's a Satellite P200-BB808C.
  When I started there are two missing drivers, mass storage controller, and a multimedia controller. I did a clean install, starting with formatting the drive.
  Windows 7 loaded a - OK and all Toshiba drivers have been installed in a recommended sequence. I was able to locate the driver for the storage controller mass but still couldn't find anything for the multimedia controller.
  I've been alternating between the site of Canada and the United States with no luck.
  I have also spent a lot of time googling variations of the same question, trying to find some information on this driver. It seems that a lot of people have the same problem.
  So far, the system works fine without glitches or hang-ups.
  Any suggestion would be appreciated.
  Thank you.

  Hello

  To be honest, I don't know about driver multimedia controller you need.
  can post you the code of the provider and I can find the driver? To find:

  1. go into Device Manager, click on multimedia controller and then go into property and then go into the details. You will see a code like for example PCI/VEN_8086 & DEV_27D8 & SUBSYS...

  or http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm