"The relationship of trust between the Client and the domain controller has been lost."

Similar Questions

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• The connection to the remote host has been lost.

  Seriously, almost every time I save a file and try to download it I get this error:

  The connection to the remote host has been lost. Click Refresh to reconnect.

  So I have to start again to download the file again... but no, I get this error again... until about 7 times then it will finally through. After that happening by once I have on a window of 2 minutes where I can download files without errors... then the cycle continues.

  This is driving me CRAZY! It happened for about 2 weeks. I have not recently changed all the server info. I used to download files on the same server from dreamweaver all the time with ease. My partner with the same configuration works always with ease. So why am I having so much trouble?

  I often have to troubleshoot PHP where I upload to the server to run it to see if it works, and I could have several times to download a file in the few minutes that becomes incredibly tedious task with this ongoing issue.

  Someone please help.

  Thank you!

  P.S. I'm using CS3.

  Ah ha! I finally got to work properly!

  Your site-> Site-> Remote Info Manager, try to check the passive FTP box and see if it works.

• WE'RE NOT ALL OF YOUR UPDATE. THE NETWORK CONNECTION HAS BEEN LOST.

  You have the idea what to do. This happens, when I want to update something iStore and iTunes. THX

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Ability of blackBerry Smartphones to synchronize the network time has been lost

  Hello world

  Until very recently, I had the possibility to synchronize the time with the BlackBerry network and the mobile network (3 Australia). Both worked fine as I Express put an incorrect time, and then synced with both of them.

  This now seems to have stopped as his network saying time is not available.

  I tried turn this option off and turned on, tried a battery pull, searched everywhere I see etc.

  Is there anything else that could affect the ability to synchronize the time with the network

  Thank you

  Paul

  Interesting. I went just manually the phone 2 g (because I was doing a long call in a 3G area low and I didn't want to cut out), and when I turned it to 3G and 2G was back at the time of the network.

  Paul

• VMware Fusion 3.0.1 update error (the connection to the update server has been lost)

  Hello

  I tried to update my vmware fusion many times, but I get this error message. I'm sure that is not because of my connection because I was running OSX update at the same time and I was able to update my OS x without any problems. VMware actually stopped the 3.0.1 update because they are a lot of bugs or there is something else, what happens to me laptop. BTW, I use a 2.8 Ghz MBP.

  See you soon

  Instead of updating through the Fusion program, try to download the package install .dmg and upgrading in this way.  Go to http://www.vmware.com/download/fusion , scroll down and get information, then download the full version (415 MB) or the Light version (170 MB, less AV and some tools).   The light version can download additional items later if necessary (I hope).

• Safari displays "the network connection has been lost" for all files flv on the internet.  Firefox reads all

  I've upgraded to the latest version of Flash to correct what I thought was a problem in Firefox.  This problem turned out to be something else but now Safari will not play ANY flash content.  I uninstalled and reinstalled several times.  I even installed an earlier version.  All the these have exactly the same result.  Flash works in Firefox, but not in Safari.  I cleared the cache.  I entered the settings of flash securty and remove all the content.  Nothing seems to change this.  Anyone have any ideas?

  Never mind.  Stupid stupid stupid.  There was a firewall rule blocks flash.  I don't know why it worked in Firefox but when I unchecked, fixed it.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

  I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

  Thank you

  Hi Bob,

  You can consult the following links of wire and check if it helps.

  Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

  With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

  Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error pops up (x 000...)

  When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error appears (x 000...), could not see clearly, as it happens too fast and my computer restarts. After restarting it brings me to the reovery Manager, so I decided to reformat but an error pops up (error 100a).

  When I went to check the disc, that all satisfied the test except the HDD test failed, the problem was bioshd-8. The computer just always brings me to the Manager of recovery even when I want to start windows normally. Really need help. Thank you

  Hey, Izaya_Orihara
  If you encounter any problems with your HP computer?

  Method 1
  How to fix your damaged OS files:
  1. close all of your applications.
  2. click on start.
  3. Type "cmd" on ' search '.
  4. right click on "cmd" and click "Run As Administrator" and click OK.
  5. Enter "sfc/scannow" (without the quotes).
  6. press ENTER.
  7. If is done, you must restart your computer.
  If you do not work with this method, try the second method.

  Method 2
  Install Windows Vista SP2:
  You must install SP2 from here: http://www.microsoft.com/en-uk/download/details.aspx?id=16468
  And the problem has been corrected.

  If the two methods don't work, if you have a system recovery disk, open your CD/DVD drive and the put and shut it down.
  And can solve problems with your computer.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cisco ACS and the domain controller

  Hello

  We are currently using the Cisco ACS 3.2.3.11 solution engine and using a Windows domain as a remote agent controller.

  We now have the ACS to 4.1

  1. do I need to upgrade the remote agent on the domain controller as well?

  2. any computer on the network can be used as a Distribution Server?

  3. after an initial backup and upgrade then to 3.3.3.3 I make another backup before the upgrade to 4.1?

  You can use any PC in the network as a Distribution Server.

• I received a call Thursday last of someone who said they were by the Windows team and that my computer has been altered. Is it a scam?

  The call was clearly from abroad and had a bad connection.

  I received a call Thursday last of someone who said they were by the Windows team and that my computer has been altered.   The call was clearly from abroad and had a bad connection.  Basically, they wanted to sell me something for $99.  Is it a scam?  Called again today and they make me nervous because I don't know that much about computers.

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• Install VMware vSphere Client on the domain controller computer

  Hi team,

  How to install VMware vSphere Client on the domain controller computer? Can someone guide me?

  Thank you

  John

  Please follow this link:

  http://www.vmwarearena.com/2015/01/how-to-install-vSphere-client-on-domain-controller-machine.html

  Thank you

  Venance