OBIEE 11G - layer physical attributes has a yellow triangle next to th

Similar Questions

• My acer crystal eye webcam has a yellow triangle

  Original title : my acer crystal eye webcam want workit say its compateble and I do not how there to remedy can anyone please help me

  It has a yellow tryangle on the script, I can't make it work please help me out... good.but Word up...

  Hello

  -Don't you make changes to your computer, after which the issue started?
  -A Acer crystal eye webcam work much earlier?
  -What operating system is installed on your computer?

  Assuming you are using Windows 7, I don't see Acer driver updates; and compatibility with Windows 7 does not list that compatible webcam as seen HERE.  You can, however, try to install the Vista drivers and run it in compatibility mode of Windows. However, there is no guarantee to this method.

  You will need to contact acer to get help.
  http://Acer.custhelp.com/app/answers/list

• in the Device Manager the multimedia controller has a yellow triangle,

  Windows Update can't install a driver, sound card works, according to windows. Device Manager is not a manufacturer fot the contoller
  So where is it? and how can I solve this problem?
  Randy

  Try to reinstall the driver of your PC manufacturers chipset supports site or manufacturer of the motherboard if a generic desktop computer

  Or if the problem occurs after a windows update, use the system restore for a period before this update, and then in the settings of windows update, disable the recommended updates, leaving only important updates,

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• 6T 04 adapter has yellow triangle

  I had problems with my internet - whenever I try to type something in a search box on a website from my laptop stops automatically in standby mode... I did a diognostic and found a yellow triangle next to the adapter 6 T 04... I tried to update the driver, but vista has me place... so far my laptop is second hand and came with no disk Vista... its a dell inspiron 1525... im thinking to download the driver on a stick of mem then do a fresh driver instal... it will work and if it is the correct thing to do can someone send a link for the driver im really struggling to find

  Thank you

  Lee

  Lee.w,
  The 6to4 map is not necessary and can safely be disabled.  This is a new Internet Protocol which is currently used by only a small percentage of the networks, for most of the largest companies.  If you delete or disable all the IPv6 protocol and the adapters, you won't have no error message on this issue and it will not affect the operation of your network.  If you experience other problems with your computer, they are not related to the 6to4 map.

  Disable IPv6:
  Uninstall IPv6 on all interfaces and remove IPv6 virtual cards.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.»  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  This should solve the problem of error messages.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OBIEE 11g Installation failure.  YES-10117 & prior has no controls

  Hello world
  
  Hoping someone can help. In short, I tried to install OBIEE 11 g (Enterprise install) and I get the next box pop up / error message...
  
  YES - 10117:File C:/bishiphome/Disk1/install/win32 /... /... /stage/products.XML not found.
  
  Failed installation.
  
  Prepare session failed
  
  YES - 10117:File C:/bishiphome/Disk1/install/win32 /... /... /stage/products.XML not found.
  
  The message to the final step, once I have click on "install".
  
  Is that what is anyone able to advise?
  
  To provide additional details. I'm installing on Windows XP, on a 11g DB, using a laptop with a loopback adapter. I think I successfully install in the RCU.
  
  An anomaly that I see, is that I couldn't successfully success 3 due diligence? Simply, I received a message that failed, but I'm still able to progress through the following screens. This would be the cause of the problem? Everyone would be able to advise what I need to do to make sure I spend 3 controls?
  
  Tips or things to try appreciated
  
  (my apologies if that responded with another post)
  
  Thank you very much

  Hello

  It must be a bad sample. Please check out my blog. I have documented the 11g on Windows XP installation.

  http://obieedeveloper.blogspot.com/

  See the following thread.

  http://KR.forums.Oracle.com/forums/thread.jspa?threadID=1124021

  Thank you
  V

  Published by: Vincent Krishna August 26, 2011 08:09

• How to create the logical tables & how to give joints according to obiee 11g?

  Hello

  I have again to obiee 11g. I want to create the logical tables in MDB layer.

  After that I want to give joins according to MDB.

  I don't know, how to create the logical tables and how to give joints according to obiee 11g?

  Please help me.

  Thanks in advance,

  A.Kavya

  Hello

  The new logical table is right click on the MDB itself, for the join you generally in the business model diagram (again right click on objects).

  Maybe it's better if you start from a kind of tutorial to at least have an overview of what is happening where (layer business and physical layer etc.).

  Take a look at what Oracle has available: Oracle BI EE 11 g

  And no doubt, it can be a good start: https://apexapps.oracle.com/pls/apex/f?p=44785:24:0:NO:P24_CONTENT_ID, P24_PREV_PAGE:9787, 2

• How to calculate the top 100 in analytical report of obiee 11g?

  Hello

  I am creting report Analytics obiee 11g.

  I plug 5 columns, balance, status of the loan, district loantype.

  I want to display the data from the highest of 5 columns in the analytical report...

  For this report, I would like to add customized lines...

  My requiremt, I want to show the top 100 sales, the total amount outstanding

  and I want to add personal calculation as (total of balances / top 100 outstanding balance) * 100

  Please help me,

  I tried, I don't get.

  Please help me, how calculate these?...

  Thank you and best regards,

  A.Kavya

  Hello Kayva,

  First of all, must be defined, the grade you want, ask yourself, if you want to rank by period, branch etc, so you must use "RANK (according TO SIZE).

  I made a sample with the similar columns you use, please give.

  I've done 4 criteria using 'UNION' (not 'UNION ALL', not 'INTERSTECT', 'LESS'):

  

  And my results are:

  

  Check it out:

  1st test:-J' have the sum 187 157 538.57 as the sum of the top 10 projects, the Company (Empresa) and period (Mesanodocum)

  2dont criteria: -check the second line "SumaTotalProyectos" which is the sum total of society in Ene-2015 (January 2015) for all projects. Who is 211 249 318,42

  3 criteria:-check the 187 157 538.57 which is the sum of the top 10 projects

  4 criteria: -which is the percentage of it, 187 157 538.57 / 211 249 318,42 = 88.60%

  How can you put?

  1. allows you to check the criteria 1: the sum of the top 10 projects

  

  Check the filter of RANK

  

  2 to check the 2 criteria: total sum of society

  

  

  3 to check the 3 criteria: ranking of the sum

  

  

  4 to ensure criteria 4: percentage

  

  

  Note:

  As you can see I have two projects "columns", I need to get the sum of ranking, for example, you must do a ranking by branch and get the same, has twice this column to your criteria and after it allowed you to exclude.

  

  Kind regards

• master detail in obiee 11g report

  Hello

  I create report master detail in obiee 11g (11.1.1.6.5). I want to use it to navigate from one report when you click on the chart to another report that has tables and graphs in the same dashboard too.

  Can you please how can I do

  Hello!

  You have two options:

  First: Apply channel Interaction. You can click in your master detail report and automatically your second report will change.

  Second: Use action links.

  Look at this link: OBIEE 11 G - master detail | GerardNico.com (BI, OBIEE, data warehouse and OWB)

  Pls mark so useful

• OBIEE 11g Services error

  Hi Experts,

  I use Oracle database and obiee 11g 11.1.1.7.0 version after having long db 11g connection and start the obiee services but services can not Kiss properly error in Oracle BI Instancecoreapplication and Essbase Serveressbaseserver1,.

  This type of problem in the face of large number of times, but I another solution. I want to talk about a lot of sites but still facing problem so please solve my problem. Below mentioned a mistake...

  MyApps\MDW\instances\instance1\bin > opmnctl status

  Process pending: instance1

  ---------------------------------+--------------------+---------+---------

  IAS-component | process type.     The NEST | status

  ---------------------------------+--------------------+---------+---------

  essbasestudio1 | EssbaseStudio |    4976. Alive

  essbaseserver1 | Essbase |    7552. Init

  coreapplication_obiccs1 | OracleBIClusterCo ~ |    5160. Alive

  coreapplication_obisch1 | OracleBIScheduler ~ |    3944 | Init

  coreapplication_obijh1 | OracleBIJavaHostC ~ |    3948. Alive

  coreapplication_obips1 | OracleBIPresentat ~ |    7796 | Init

  coreapplication_obis1 | OracleBIServerCom ~ |    6576. Init

  Error em:

  Start failed with 2 errors and 0 warnings. Problems reported by:-: instance1, coreapplication. Check the logs for more information

  OPMN.queryProcessStatus failed with the following exception

  Event processing: SEVERE: element Type: BI_INSTANCE, Id of the item: coreapplication, result of the operation: FAILED_TO_STOP, the detailed Message: error stopping at one or more Instance BI components; Please check the server for detailed message log files

  Event processing: SEVERE: element Type: ORACLE_INSTANCE, item Id:-: instance1, result of the operation: FAILED_CONTACTING_OPMN, Me. retail

  Event processing: SEVERE: element Type: BI_INSTANCE, Id of the item: coreapplication, result of the operation: FAILED_TO_START, the detailed Message: error

  Thank you

  I found the solution for the connection failed in RPD (reposiotry)

  The database connected all services to be cuddly but RPD can not able to see the data error occurred and obiee also offline database error has occurred.

  Check the installation of OBIEE for example folder:

  \Oracle_BI1\network\admin\ and tnsname.ora and then open file check the database

  name of the database = obiee my ip = 192.168.0.129 and port 1522 If what that it either in error means please configure and then display the data in the RPD and OBIEE

  OBIEE =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.129)(PORT = 1522))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = obiee)

  )

  )

• Cannot connect to the Analytics of obiee 11g

  Hi guys,.

  Customer installed obiee 11g in a server sitting in different place. We have deployed our own repository and catalog. Now, we can not access analytical obiee. It does not accept any user name or password created in the weblogic console. But if we deploy repository by default Oracle SampleSales, then we could identify. Can not understand what the problem is!

  It is throwing the following error message:

  [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.searchidentities] [ecid: 004tnN1tfkXFw0XpLs_Aie0004ds000000, 0:162] [tid: 3327710976] error in retrieving data from the API of Population user of the Oracle BI Server user/group.

  Impossible to create a system for BI Server user connection during the execution of the requests of the user population

  ODBC driver returned an error (SQLDriverConnectW).

  State: HY000.  Code: 10058.  [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.

  [nQSError: 73006] Failed to get from the main Cluster controller (aaobiee.mm.co.za) or secondary () specified for the DSN Oracle BI server cluster Cluster controller. (HY000) [[

  Leader: odbcuserpoploaderimpl.cpp

  Line: 726

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.searchidentities

  Saw.Security.userpopulationmanagerimpl.searchidentities

  saw.catalog.dirCache.getAllSharedFolders

  saw. CatalogAttributes.cache.cleanup

  saw.taskScheduler.processJob

  TaskScheduler

  Saw.threads

  ECID: 004tnN1tfkXFw0XpLs_Aie0004ds000000, 0:162

  ThreadID: 3327710976

  task: Cache/CatalogAttributes

  Please help how to solve!

  Thank you

  BK.

  Hi guys,.

  After some kinds of analysis, I saw massive files opmn core dumps gathers in the bin/instance1/instances directory. And, unfortunately, my BISystemUser has been removed and so the log file subsequently posted an authentication failure. I have the same recreated and reset the password. In addition, checked the applications deployed to Analytics and some other applications in the console and change the destination in the 'framework of Cluster' instead of all clusters. Then it worked fine and I could connect now!

  But still the problem is not sorted completely. Now, I am facing problem when start and stop opmn. It says opmn failed at the local port. And, opmn do not stop and start normally. Saying: time out to stop and start the managed server. Although it does not create a problem at startup and shutdown, but it says opmn failed to local port and yes the Scheduler never wants to start when I restart opmn. Whenever I restart my opmn export base files in the same place. Could you pls tell how to avoid these unexpected dumps core and how this active Scheduler? Perhaps conflicts with other ports opmn.

  Scheduler generates this error: (will post some recent mistakes fore soon on it)

  [2013 09-26 T 15: 18:42 + 02:00] [opmn] [ERROR: 1] [[libopmncustom]] Ping failed as a ready reminder for proc:467413041

  [2013 09-26 T 15: 18:44 + 02:00] [opmn] [NOTIFICATION: 1] [90] [ons-internal] Server ONS insider

  [2013 09-26 T 15: 18:44 + 02:00] [opmn] [TRACK: 1] [522] [pm-internal] PM State directory exists: / u01/app/middleware/instances/instance1/config/OPMN/opmn/states

  [2013 09-26 T 15: 18:44 + 02:00] [opmn] [NOTIFICATION: 1] [675] Server [pm-internal] OPMN ready. Application of active treatment

  [2013 09-26 T 15: 18:45 + 02:00] [opmn] [ERROR: 1] [] [libopmncustom] process Ping failed: coreapplication_obisch1 ~ OracleBISchedulerComponent ~ coreapplication_obisch1 ~ 1 (467413041:1854) [address is put into matching the query properties]

  [2013 09-26 T 15: 18:45 + 02:00] [opmn] [ERROR: 1] [] [libopmncustom] process Ping failed: coreapplication_obisch1 ~ OracleBISchedulerComponent ~ coreapplication_obisch1 ~ 1

• Federation of Essbase with OBIEE 11g

  Hello

  I have a hierarchy of accounts unbalanced jagged in the Essbase cube I imported into OBIEE repository in addition to hierarchies of script, Version, entity, period and year. Now I have a secondary table in the Oracle database with account, Version, scenario, with Value entity (Measure) to the level below each hierarchy. I read that for the Federation, the hierarchies must be balanced. In the relational table Account dimension, I have maintained a consistent no. levels with values zero everywhere where the leaves are absent.  Now that the accounts of the Essbase cube hierarchy is unbalanced, how should I design to enable Federation between the cube Essbase and relational table? OBIEE version is 11.1.1.6 and Essbase is 11.1.2.2. Your help is very appreciated.

  Thank you and best regards,

  Karamba.

  The problem was solved by using tables of choice. Also, the relational database table has been filled with the names of the members alias. Then in OBIEE MDB layer, using sparse Lookup, Essbase alias members were used to find the value against the relational database table which served for the lookup table in the MDB layer.

  Thank you and best regards,

  Karamba.

• OBIEE 11G Newbie - learning curve

  Hello
  
  I am a newbie to obiee 11g and that you have installed just obiee 11g in my laptop.
  Can you get it someone please let me know if there is a set of sample exercises that are available which can help me learn obiee 11g.
  
  While I see a lot of materials available on OBIEE 11 G on the internet, I would be grateful if anyone has a list that a newbie in obiee 11g should work with obiee 11g better understand.
  
  E.g. first learn business intelligence
  Learn what is BI
  creating repository
  then start working on the creation of dashboard
  
  If there is a series of sample available to practice so that I can become more familiar with OBIEE.
  
  Basically, I'm looking for a structured learning approach OBIEE 11 g with exercies to practice. If you know Web links that provide that information please let me know
  
  Published by: 951961 on October 3, 2012 03:35

  Follow these
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/biadmin11g_02/biadmin11g.htm
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi1113/createanalysis/PS.htm

  Pls mark as correct

• OBIEE 11g & MSAD

  I installed MSAD with WebLogic and am able to see all users by following the steps described in the guide to security. I can connect to answers with my users "weblogic" who installed the system, but when I try a user it fails. What should I bring on groups of MSAD as well and then assign them to roles or can I assign a role directly to a user to operate; or do I have to do in order to get the user to connect?

  J.A.M,

  Here is the answer you are looking for,
  http://bimetrics.WordPress.com/2011/08/12/integrating-MS-Active-Directory-with-OBIEE-11g-in-WebLogic-Server/

  The section on password BISystemUser by doing the same for the user to BISystemUser weblogic and the BISystemUser AD (which could actually be any arbitrary name if you wanted to) the user doesn't actually take place.

  Work through the steps listed in this blog post for your environment and your problems should be solved and your weblogic users and AD username should be able to connect successfully on Analytics portal.

  Take note of her virtualize = true attribute.

  In addition, make sure your Application roles through the command console of Fusion EM BIConsumer application role includes the main "authenticated role." This will ensure that all users who actually authenticate via AD or weblogic LDAP are allowed in the Analytics portal.

  Please give the points. I'm starving for points.

  See you soon,.
  Christian

  Published by: Christian screen-Sep 14, 2011 12:53 AM

• Satellite L40 - 17 t - WiFi device has warning yellow sing

  Hello

  I'm trying to fix myself first. That's what I have: Satellite L40-17 t (PSL48E-02N02TRU), RTL8187B, Vista (unfortunately Russian version - I can't take it to a place of repair, here, to the United States), Kaspersky updated (I guess that there is no virus in my system)

  Here's what happens:

  (1) the WiFi on the side only flashes once the laptop when starting, then it turns off (is this normal?)
  (2) there is no link - it has 'unknown network - connect only to local '. The other computer works fine with the Lynksis
  3) there is a yellow exclamation next to the Realtek wireless controller
  (4) in its General properties, there is an error 37

  That's what I tried:

  (1) I tried to update the driver for the properties, but it is said that it didn't need to be updated
  (2) I tried to delete the form the menu device driver and then reinstall it from USB key (I extracted the driver from Toshiba website to a flash drive). When the installation is complete, it says it is complete, but the State in the menu, it says that it could not install the driver - consult the manufacturer.

  Once when I turned on the laptop it started to run a system recovery, but after that even the keyboard stopped working. Now, there is no keyboard, no WiFi, no same connection through the cable - it says unknown network. Everything that used to work before.

  Please help, please tell me could this be something I can fix on my own, or look at it as a dead-end?

  Thank you

  Hello

  Hmm for me it looks like a driver simply issue first of all, I would recommend deletion of the current WLAN driver. Then go to Device Manager > right click on the WLAN card > Uninstall. Then, restart your computer. Now, run a registry cleaner like CCleaner (freeware) and clean the registry. He must find the old and bad registry keys and delete all the. Then reboot again and now download & install the latest Portal WLAN Toshiba WLAN driver:
  http://APS2.toshiba-tro.de/WLAN/

  What operating system you're using now? It's the preinstalled Windows operating system from Toshiba?