In the library grayed out paragraph styles

Similar Questions

• Installation of Acrobat 9. He got on another PC but want it on my new. When I install it, it asked the serial number. When I enter it, it says it's invalid. Old PC has the disable grayed out... any ideas?

  Installation of Acrobat 9. He got on another PC but want it on my new. When I install it, it asked the serial number. When I enter it, it says it's invalid. Old PC has the disable grayed out... any ideas?

  You must use the exact installation file that corresponds to your serial number.  of course, the versions must match.

  a little less obviously an acrobat pro installation file must be used with a number of pro series, and if a serial number is a sequence that includes acrobat, you must use the installation files on.

  Error "serial number is not valid for this product". Creative Suite

• Add the tab character before the content of particular paragraph style

  I have to add the tab character before the content of particular paragraph style

  app.findTextPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyles.item ("IDX2");

  list = app.activeDocument.findText ();

  // 2. For each found the point...

  for (i = 0; i < list.length; i ++)

  {

  App.Select (list [i])

  App.Selection[0].insertionPoints[0].contents="\t".

  }

  But the code above only works in the first instance. But I must add the tab character all the content of the paragraph applied

  How to do this

  Hello

  Another way without GREP...

  var doc = app.activeDocument;
  var myStories=doc.stories;
  var J= myStories.length;
  
  while( J-- ){
      var mStorie = myStories[J];
      var K= mStorie.paragraphs.length
      while( K-- ){
          if  (mStorie.paragraphs[K].appliedParagraphStyle.name == "toto") {
              mStorie.paragraphs[K].contents= "\t" + mStorie.paragraphs[K].contents;
          }
       }
  }
  

• How to insert bullets in the middle of a paragraph style?

  For my business, I create auto-generated CVs. Due to the limitations of the program used to automatically generate the CV, I can only use a paragraph style nested throughout the entire document. That's what I would like to a paragraph style to look like:

  COMMERCIAL:

  Clinic OVO, Montreal (Quebec)

  • Renovation of the clinic, 2008

  Role: Project Manager

  Merck, Kirkland (Quebec)

  • Building 5, 7 & 8 - existing office renovation & expansion, 20 04

  • Building 18 - new building project, 2001

  Role: Project Manager

  I know how to insert a hyphen at the beginning of a paragraph style, but how indicate I want chips to start on the 3rd line of the paragraph and stop 2-the last line of the paragraph?

  You will need to enter manually. Styles cannot add text, only format.

  Automated bullets are only accessible to the general public for the start of a paragraph and cannot apply to the middle. You can use find/replace to add, possibly, but it doesn't look like me you have a model that is sufficiently well defined to do any sort of work of automation.

• Change the Format of a paragraph Style Figure

  I work in Adobe InDesign 6.0 (PC) on a Dell laptop.

  I copied the text from a file and placed it in another file. Unfortunately, the figure numbers all State the former chapter number (in this instance, "6-#" as 6-1, 6-2, etc.). What I want to do is for the numbers to tell 8-1, 8-2, etc., because they are now in Chapter 8.

  I found this much: according to the style of paragraph to these figures, I right-click and select 'change {paragraph Style name} '. Ok. Then in the window that opens, 'Paragraph Style Options', select "Bullets and numbers" in the left menu. Ok.

  Now, here's my problem. I believe that the key to the entire mystery to be included in the section entitled "Style numbering." Yet, I can not Flip off the fields presented here. They include:

  Format: I guess that's the numbering style I want. Currently it says «1, 2, 3, 4...» I left that alone.

  Number: This field contains "Figure ^.» ^ H ^ = ^ # ». What is with the 'H' and all the symbols of hat and all that? What do I need to let him say so that my numbers read "Figure 8-1", "Figure 8-2" and so on? . "

  Style of characters: What am I doing here?

  Mode: What am I doing here?

  Any help would be sincerely appreciated!

  -Shadow

  "What am I doing here?"

  Visit the help, for example. In the list of topics on http://help.adobe.com/en_US/InDesign/6.0/WSa285fff53dea4f8617383751001ea8cb3f-6da6a.html , I see all your problems listed as subpoints.

  (How I did not know where to find the page? Google "indesign cs4 numbering style" and, thus, it was the first hit. And the next hit points to the book Type Real World Adobe InDesign CS4 , I bet it is also a good resource.)

• Right click on Favorites gives the menu grayed out in 29 FF...?

  Hey,.

  Since my upgrade to Firefox 29, when I right-click on any bookmark in my list of bookmarks, I get the context menu, as always, but ALL options are grayed out so that I can not click on any of them? How can I fix it?

  I had the same problem today. I closed and reopened firefox and now all the choices ("open in a new tab", "open in a new window", etc. are available again.

• The music CD I loaded on itunes is among the tracks on the album "grayed out", and only album tracks in. "BOLD" ' are synced to my iphone 5.  Any help in this appreciated.

  I have loaded the CD of music on itunes have some of the "grayed out" album titles, and only the album in 'bold' beaches are synced to my iphone 5.  Any help in this appreciated.

  Thank you

  Dr.

  Only the sight of songs using the drop-down list located at the top right of the playlist. CTRL + click all empty the box to check, or ctrl-click on a square filled twice. This will ensure that all tracks are checked and enabled for synchronization or shuffle playback.

  TT2

• Activate the box grayed out reason codes?

  IPCCX Enhanced 3.5.3 on dedicated server. CCM 4.0.2

  When I go to Office Admin I can enter the new reason ok codes, but the checkbox to activate the reason codes is grayed out and cannot be verified.

  Is this due to a licensing issue?

  See you soon,.

  NJ.

  I think that you should add one is not ready and code logout to check the box.

• "Straighten the lines' grayed out for multiple lines MLD

  SDDM v4.1.0.866

  The selection of several relationship lines in a diagram of LDM created with an earlier version (4.0.2.840 and perhaps earlier too well but I have not tried), straighten lines is now grayed out and not available. It is activated when I select a relationship line. It happens that LDM non-relational diagrams (i.e. in diagram relational, I can select several lines of FK constraint and straighten the lines can be used).

  This behavior is also now seen with v4.0.2.840 (when I load a design created with this same version), where it is used to straighten the lines on several front lines. I certainly would have noticed this if present behaviour earlier, since it is such a waste of time. I think that it has appeared since the installation of 4.1.0.866.

  On a new design created with 4.0.2.840 or 4.1.0.866, the usual behavior of allowing to straighten the lines on several lines is fine. The problem appears only when loading existing diagrams of LDM.

  Any suggestion would be appreciated,

  Patrick

  Also, I was able to reproduce and logged a bug.

  You have found the good workaround.

  Philippe

• absent the palette keyboard shortcuts paragraph styles

  I've upgraded to versions 2015 of my CC apps a few weeks ago. Everything seems to work fine, but keyboard shortcuts, I create paragraph styles do not appear in the palette as they did. Shortcuts in the palette show styles of character only. I don't see any option to show or hide shortcuts. Any way to turn them on in the palette paragraph styles?

  Try to screw up your prefs see replace your preferences

• Settings of the user interface in the preferences grayed out

  I'm a Super Administrator and administrator of the workspace and still I can not for queues or UI settings in the preferences. I need to change the startup location to "Start the process" of "To Do".

  Set preferences for the user interface in the preferences > settings of the user interface tab. The following preferences are available.

  • Start location: Specifies the page that displays when you access the workspace HTML. The four options available are the processes to start, track, and Favorites.

  The settings of the user interface tab is grayed out why and how I get it back?

  Thanks to our QA group, we found a way to access the settings of the user interface. The single tab activated when opening preferences is out of the office. By selecting the button "+" in the tabs on the desktop calendar, queues, and the user interface settings are allowed.

• Cannot change Spot color to process color in the swatch - Grayed Out properties

  Hello: I'm changing a spot to treat the color in the options of nuance for the printing of the newspaper. It's in a logo, a client send me make an announcement. When I try to do, the options to change the color type and the name of the color in the swatch options are grayed out. No idea why this could happened?

  Nevermind, I figured out. I tried to change the option of swatch spot which is in a file, linked. When I integrate the file, or open the original and paste it into the work, then I can change the shade of Spot process options.

• Place the command grayed out

  Update the ID, I, PS CC 2014. Uninstalled ID, HAVE, PS CC. Bridge CC Version 6.1.0.116 update x 64, Windows 7. "Set" command is dimmed. Rebuilt the prefs using the CTRL key at the start of the Bridge. Always grayed out. Any ideas?

  I could get this resolved by completely removing Adobe CC and then using the Adobe's own removal tool. I then reinstalled everything from scratch and the PLACE command now works. It looks like a lot of hoops to jump through to make it work again, but ultimately it has fixed the problem. It and a bit of patience.

• Table of contents for the edition of ePub paragraph style

  I am trying to figure if InDesign can allow us to the editor the dynamic table of contents. What we have is essentially the following:

  Chapter number (single paragraph style)

  Chapter title (single paragraph style)

  First paragraph (single paragraph style)

  We want that the ToC that gets pulled up in an eBook reader to show this:

  Chapter 1: Chapter title

  Chapter 2: Chapter title

  At present, only InDesign appears to export each as a specific paragraph style, without setting them on the same line side by side. We're stuck with:

  Chapter 1

  Chapter title

  Chapter 2

  Chapter title

  Does anyone know of a way to export the ePub is what we want rather than this broken hirarchically way?

  There is no good way to do it. We must either go to the ePub after export, or change the style, so there's a return between the chapter number and chapter title instead of a return. The second option will involve completely restyling, and get in there colon will be delicate.

• Warning of the range grayed out in what cases?

  According to the Manual CS5 Gamut Warning point in the view menu should be available when color test is verified however mine is grayed out for all of the items in the sections second of the test Format, legacy Macintosh and Internet Standard Monitor RGB menu.

  If I choose the equivalent of Internet Standard and Monitor RGB from the custom option on the Format of event menu, Gamut Warning becomes available

  Is this a bug?

  Please read the help:

  Soft proof presets

  .. .unavailable in Photoshop for Lab and CMYK documents

  (in the same way in Illustrator)

  Cordially - Gernot Hoffmann