Including brand and playback controls

Similar Questions

• Quarter playback controls when the 3rd party app plays

  When a 3rd party application plays on my iPhone (Audible, Castro,...), my Apple Watch does not show the playback controls to it. Wait for the watch to show the same controls as the control center on my iPhone. But it shows a Play button and gray < <>> / buttons. Volume controls work well and when I press the play button, the 3rd party app is dimmed and the iOS app music begins to play.

  I'm doing something wrong?

  iPhone 6 s more - iOS 10.0.1

  Apple Watch series 2 - Watch OS 3.0

  Hello

  Audible or Castro iPhone applications currently include an app for Apple Watch:

  • Sound: https://itunes.apple.com/us/app/audible-audio-books-original/id379693831?mt=8
  • Castro: https://itunes.apple.com/us/app/castro-play-share-podcasts/id1080840241?mt=8

  I suggest that you see the respective developers support resources and/or consult the developers directly on the contribution of functionlity for their applications on Apple Watch:

  • Sound: http://audible.custhelp.com/
  • Castro: http://supertop.co/castro/press/#contact

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• Playback control disappears

  In my course, the playback control appears in all the slides (including the demo) except the simulation.  What happened and how do I get that back on all pages?

  Hmmm... and please mention the version you're using?

  Can you check if some objects are marked in the simulation: open Panel Advanced Interaction (F9) where you can see all marked objects and marked the question slides.

  If this is the case, can you check the Quiz preferences, settings: is perhaps the option 'Hide PlayBar in Quiz' checked?

  Lilybiri

• The playback controls replace the click box

  Hello

  This applies to both Captivate v4 and v5

  I have a project with playback controls that include the Pause/Play.

  I want to add two click boxes on a blade that the learner must click ' before being able to move to the next slide.

  When the slide reaches the first click box, the control Pause/Play display changes from Pause to play and the user can simply click on the "Play" option to work around the click box and move to the next slide, click point on the slide box, click 'replay' and then move to the next slide without having to go through the boxes click the slide.

  How can this be avoided so that the learner has to go through the slide via the boxes to click and do not use the set of playback controls option?

  PS. Playback controls Pause/Play are essential for the entire project, so do not show are not an option in this case.

  Noel

  Hi Noel,

  The simplest is hide the playback bar upon entering this slide and show again to the next slide. It is not possible to hide a button.

  Hiding on this slide:

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 0

  Display the next slide

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 1

  Lilybiri
  

• Customized playback controls

  Hi all. Plain I m new in Adobe Captivate. I m using Captivate 4 test (test program) to develop software training interactive (well, entire lessons) at the Poste where I work.

  Now, the school people want to know if (in Captivate), we could use a customizable "refereed". "."

  They want a box with the 'next' buttons, 'previous', 'exit', 'volume control', a progress with the current slide area and the total slides and a room for us to insert the text of the slide. They wanted that this "box" to stay in the right corner of the screen, giving more 'open space' to the screen for the content and the student. "

  Well, I think it could be done in Flash, but my knowledge of Flash is a white 0.

  So, if someone could help me find out (and further develop this), it will be very apreciated.

  Thanks in advance and sorry for the mistakes of English (English is not my native language).

  Hi again

  Ideally, Yes. You need someone who knows how to program in Flash to create custom playback controls.

  You can fudge things a little to not use a provided Captivate playback control and simply using images with boxes to click on them to run actions. But to get it right you really need someone who not only understand Flash well enough, but also includes Captivate too.

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• Activation XP to replace the same brand and the motherboard model

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  "BobL39" wrote in message News: e27a096a-1b58-4647-8c9d-98e9e0111b65...

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  You can try the phone activation - this time, when the automated system asks you what service you need, do NOT - this should oblige the operator to pick up. They will help you.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• _doPostback(), calendar and dropdown control does not work on blackberry: RIM's support that?

  Hi all

  I develop mobile site in ASP.NET 2.0, which should work on most common browsers includes blackberry.

  but javascript _doPostback(); fuction does not work, also dropdown selectedIndexChange event also does not work.

  drop-down list and calendar control internally uses _doPostback().

  RIM who makes? If not, then what is the alternative for the drop-down list (I have a lot on my pages).

  Please, give me your feedback if RIM supports _doPostback(); or not.

  Thanks in advance.

  great! It works fine now.

  Thank you all for posting.

• Now updated for first 14 elements, the playback controls do not work

  Updated for first 14 elements, but now the playback controls (play, stop, etc.) do not work. First 13 items works very well. I uninstalled and reinstalled programs using Adobe uninstallers, did not help. After starting in safe mode, I could get 14 PE for play/stop, although audio has been disabled. Very frustrating! With the help of Mac OS Yosemite 10.10.5

  dizzyo

  Purchased as a download on the website of Adobe Premiere elements 14?

  You went through the usual forest, video/graphic card driver updated, latest version of QuickTime 7 installed, run programs as an administrator...?

  If you buy the product, while you still can (current version, recent purchase), you might want to involve Support Adobe through its Adobe Chat online (download, installation and commissioning).

  Contact the customer service

  Just to confirm... are you saying that elements 13/13.1 first works OK on the same computer, timeline content as first elements 14? You run the 14.1 update, or if you're still at 14? If you have updated to 14 to 14.1, the content of the timeline plays OK in version 14?

  RTA

• Public beta of El Capitan and playback full screen

  Read full screen has completely broken for me as soon as I upgraded (2015). It will work once after shooting to the top of the application, and then control-tilde is to select the window of the program (with the frozen video, but audio playback). Enters the main features again (or Esc) brings back 'local' playback Which tells me, is that the key command is doing its part, but PP refuses to move this window.

  I'm also under El Capitan (public) beta. I tested on another HDD PP with the FIRST iteration of the EC beta, and there are no problems with the mode full screen. If beta 2 broken this and it remains still broken since Beta 5.

  I erased from my hard drive and completely installed THIS and fresh PP, but no luck. MacBook Pro running 6.1 (CUDA does not apply). Any thoughts?

  Your answer is WRONG. A Macbook Pro 6,1 does not use the GPU acceleration. Yes, it's a question of El Capitan. As I already said. But as I scoured the web and not found someone else noting this issue, I wanted the hope that someone had discovered a workaround solution. (Other that quitting and restarting PP.)

  EDIT: Turns out there IS a workaround. I'm not an MVP, but I thought about it. A double click on the program window title bar, it supports full screen. Double click on restore even it regular size. It is good enough until Apple or Adobe fixes this problem properly.

• Turn on closed captioning power without using the playback controls?

  Hi there - I'm going to set up a movie I want to see the to use the playback controls.

  Is there that a the end user can enable/disable subtitles without using the CC button that normally appear in the playback controls (because it won't be there)?

  Thank you

  You can create a button or click box that toggles the CC variable and him allow this way.

• How can I disable the playback controls

  I recently updated to Captivate 8 and noticed that in the presentation of HTML5, I create, the playback controls at the bottom are very large.

  Is there a way I can disable these controls?

  Same way as before: project, editor of the skin. Uncheck the PlayBar.