incoming and outgoing calls to and from the highway of VCS

Similar Questions

• Save to and from the picture library to the new SDK?

  Hello

  Can IM currently using a previous sdk, in the new you save and open images to and from the image library for devices?

  Thank you

  Hi jeff,

  from what I've tested navigation file is always broken in the new Simulator. as reported here and there talk about confirming that its been broken. IM waiting on it also. hope that helps. Good luck!

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• VCS - CPL to block call routing to and from the same area of neighbor

  Hi all

  Is there a CPL rule that can be written to block calls from a neighbouring area to the same area of neighbor?

  We have problems with CUCM sent appeals to the our VCS VCS then routes the call return CUCM, causing thus "too many jumps."

  In the example

  MOVI user control VCS try to compose endpoint registered RTC CUCM, but incorrectly dials

  Appeal does not have to search for the terms of local area

  Call does not match search for VCS Expressway rules

  Call corresponds to captures all of CUCM (. *) @domain.com

  CUCM does not form DN or URI for the wrong phone number and the call is routed to the VCS control due to the SIP routing model of *. * on CUCM

  We have to capture all CUCM at the end, since we offer PSTN, as well as our users and phones have the alphanumeric URIs assigned to the DNs for Jabber, etc.

  I fear that he is not really an easy way to do it, I know because the call charged CPL first, CPL don't know what area it was intended for.

  It's probably more easily accomomplished with a slight modification to your rules of research rather than spraying anthing "@domaine" everywhere - something like:

  Anything incoming directly at @domaine in the nearby area of the local area (as is inside your organization, such as if the CUCM not found and sent it to the VCS he won't be on the CUCM, so must be local (or nonexistent) - and stop.

  And the opposite of the above - route whatever it is for @domaine of the localZone.GetDaylightChanges (because it was not found locally) to stop and the CUCM neighbour-

  And do similar for what is coming from other areas outside to route to wheverver that will be endpoints.  In this way, your call should not be bouncing back between the CUCM and VCS and create the loop that you are currently experiencing.

  Of course, if your environmetn is a little more complex than the simple CUCM and VCSes, this can be a bit oversimiplified, but could lead you in the right direction.

  Another thing to consider too - if you put in your endpoints in a directory, users can use - that will help you to prevent wrong type stuff :)

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Deleted pages appear as broken links, but no link never went to and from the

  Tech

  • RoboHelp 10 (project upgraded RH7, 8 and 9 years)
  • Windows 7
  • Connected to a VSS repository.

  Question

  The title describes what is happening, and I want to know how to clear the list of broken links these links.

  Here's what I did

  1. Through the TOC sidebar, I added a page. (right click > new > Page).
  2. Through the new TOC pop-up window, I added a new topic.
  3. After you have added the new subject, he appeared on the project view and the table of contents, as it should.
  4. I wrote a bit in the file:
     1. I created several files, some using templates and variables defined by the user, others with nothing more than your standard, white page.
     2. There is no incoming (that I know) or outgoing links.
  5. I have advanced and deleted the table of contents entry and the entry in the project view.

  Here is what happened

  1. The file appears in the list of broken links.
  2. When I vew its properties, it says there are no references.
  3. By clicking on 'Edit' does nothing.
  4. The question that's happened with several test pages, which none related to what either.

  

  History

  • I inherited this file to another writer.
  • Basically, I try to understand what they did or did not do with this project.
  • At present, there are literally hundreds of links broken, broken images, and I'm sure I saw a monster hidden in the code.

  TIA.

  Hello

  It is possible that a lag occurs between the project. DPC and the main database file. My suggestion would be to delete or rename the. CPD file.

  You will find it among all the other files in the folder where your project is located.

  Give a go and report back what your outcome is.

  See you soon... Rick

• getting data to and from the DOS window

  I use IPERF to measure flow and data errors.

  This is done by entering data in a window DOS command via the keyboard, then physically reading the data from the BACK window.

  I wish I had a LabView program to be able to write in this window and read back the response.

  Y at - it a terminal emulator to send the data? Is it possible to get the text sent in LabView that normally goes to the BACK window?

  Any ideas would be appreciated: even willing to pay for a solution.

  -Steve Girard

  Broadcom Corp.

  Don't know not how IPERF works but you should be able to use the Exec.vi system to send the command and then pull the output on the output terminals or standard deviation.

• Copy files to and from the PC problem

  No device

  When I Pug in the USB for PC cord, Win7 says that the device must be formatted first. The manual never mentions this possibility and the formatting from sounds pretty bad to me, unless there is a partition on the device, isolate this action.

  Can anyone help on this?

  Well, I spent $ 14.95 and enlisted the new, I think, support for WebOS. Last week I had live free chat service, but his week that they told me

  In any case, I was directed through telephone conversation to due a full erase and which leads to a re-formatting of TP.... with no harm to the BONE, and restore your apps, etc. the HP backup system handles it for you. That worked, as soon as I returned to the computer, the named player of the HP TouchPad appeared. He said that the car had a size of about 11.5 GB with only 141 MB used. The tech thought BONE was approximately 1 GB. the manual or something told me that you do not see the size of 16 GB. The technology also cited $385. package for service of the TP if necessary... HP is trying to re-coop some of their losses on this product?

  The conclusion is that the drive has been damaged in some way and not formatted for PC it would see. The full erase lead to a re - format the TP that was the way to emphasise with the PC.

  Thanks for your help, I will proceed to load CM - 9 at the next opportunity.

• I try Ben numbers several pdfs at the same time.  Once I did this, I'll and look and from the second page, the Ben numbers appear at the top and bottom.  I want only the bates numbers to appear at the bottom.  How can this be a gift

  I try Ben numbers several PDFs at the same time.  Once I have a result, from the second page, the Ben numbers appear at the top and bottom.  I want only the bates numbers to appear at the bottom.  How is that possible?

  Hey Bethany,.

  Please try again to implement numbering following the steps in article Acrobat bates help | Add headers and footers Bates numbering in PDF format

  Make sure that you apply for Bates numbering in the foot of page, as shown in the screenshot below.

  

  Kind regards

  Nicos

• and from the command prompt

  Hi all
  
  I want to add 'from' and 'to' prompt on a single column. Let's say a column date of creation. I could create a guest on this column and set the condition as "in between", but it asks me to choose the date between <>and <>. However, I would like to specifically show since and for this colmn. It should look like this
  
  From <>to <>
  
  wheareas currently, it is
  
  between <>and <>
  
  I know that the two are the same thing, but I want to use the first option only. Could you get it someone please let me know how to do this. I tried to create two promtps on the same column, but the problem is that when I select "go" prompt values so the same value is automatically filled into the prompt 'to' too.
  
  Please let me know.
  
  Thank you
  Ronny

  Offhand, I can't think anything, because it works for me. Try putting a date that is hard-coded in the guest as a default value. The date appears in the column then? The column shows 0 after changing the quick selection?

  Write the details of how you built the guest and the special report on configure the 'From' and 'To' columns in your report. Perhaps, that will give me a hint.

• dv4t headset no longer works and from the speakers rather

  I had this problem several times, where all of a sudden the audio headphone stops and starts coming out of speakers. Even if I unplug the headphones and plug it back, the sound only comes out the speakers.

  I guess it's a software problem, because if I go to the sound control panel and 'test' the communication device, I still hear the sound test in my helmet. It's only for everything, like youtube, games, music, coming out the speakers instead of headphones.

  I think I found a solution.

  I uninstalled the IDT audio device codecs and when I restarted the laptop installed peripheral repel high-definition audio.

  Works very well so far.

• Problem with music player and from the Gallery after the ICS update

  Hello everyone, after I've updated my bow (lt15i) to ICS 4.0.4, i found a few bugs on the music player and the Gallery

  (1) if I add some photos on the SD card, it shows no not on Gallery (Gallery Xperia and ICS Gallery)

  (2) if I add music on SD card, also not shown on the music player, so I have to use Explorer to find and play, it's very annoying

  I tried to erase the music player data, but no results and I tried to use third party applications (Jetaudio or Google Play Music) but it is same

  Anyone have problem like me? What can I do to fix that?

  This could be resolved if you reformat the SD card

  Don't forget to mark the correct answers & useful answers

• BlackBerry Smartphones Reg: is it possible to get map location by the way to and from the address?

  Conditions-1 

  I use Blackberry8300 Simulator & JDE 4.5, at my request, I am passing to go and to address how can I get card?

  I worked on a few samples, but it using only the Longitude and the Latitude.Is it is possible to get the card to the address.

  Condition-2

  Otherwise it is possible to get the Latitude and longitude in passing the address in blackberry...

  Give feedback as soon as POSSIBLE...

  k, sridhar,

  a clarification more, how u use google api to get lat and long address?

  What are the steps followed u

  Regarding

  Karthik.J

• 8 and from the elements

  I downloaded a demo of PSE8 for a user to try.  For what most, use it to PSE

  will be fine vs full version blown PS.  I want to know is can make you when you click o

  PSE8 n it goes directly into the program, not all that web stuff?

  You have to register at the webstuff?  I am looking to buy 8-14 PES of my office.

  TIA!

  Do not register for "web stuff".

  When you start PES, which opens first is what we call the Welcome screen. We do not encourage Services to members (Web Stuff) in the Welcome screen, but is not its only purpose.

  The WS is the point in the editor or organizer. In the upper right corner of the homepage (beside the close box) is an icon which will bring up the settings. You can tell the Welcome screen to automatically run also the editor or organizer if you find that you go directly into one or the other.

  See you soon

  Bob

• Keep trovi and bing on my search bar and from the menu bar, cannot get rid of them

  I updated Adobe reader as it kept asking me to do. Now, I always come in my search for Trovi bar Bing on my menu bar

  See this - http://malwaretips.com/blogs/trovi-removal/

• Scam call windows service from the centre of Miami, how did get my information?

  I received a call from someone identifying themselves as Zack Martin of windows service center in Miami.  He gave this phone number: 120 631 71742.  He said he was calling about attacks on my computer.  He had my name, the right to address and it gave me a 32 digit/letter windows license number.  I told her that I couldn't talk to him now and call later today.  He did not ask for money or be specific about the problem.  How could he get the information he had on me?  He said that I had to give her when I registered Windows.  Jim in Vancouver

  Hello

  It's a SCAM

  they want or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card information, you get allows you to download the software to 'fix' or 'test' for your computer

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.