Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

Similar Questions

• Satellite 100-192: questions after the recent MS update...

  Satellite 100-192.

  After the recent MS update I had the problem with the Realtek sound card driver. I solved it by applying the hotfix provided MS.

  Now the problem is that the disk cleanup utility does not launch. Anyone any idea?

  I just found out that my disk cleanup utility would not work due to a free program called Photo Toolkit. Although it is a nice little program for quickly editing photos, apparently it causes such problems when it is loaded.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

  Hello

  My Sansa Clip + tracks audio playback stopped (same mp3 files it used to always play) after I updated to firmware 1.02.18A.

  The player jumps just all tracks with sound of frying one after the other.  No longer play.

  What's wrong??

  Is it possible to fix it?

  Is it possible to revert to the original firmware version 1.02.15 that worked well?

  Well,.

  I don't know what the problem actually was, but certainly it's associated BONE.
  I'm at home in my Windows 7 and everything works perfectly now.

  The problem I experienced was at work, where I have Windows XP SP3 OS.

  On Windows 7 home, I copy the MP3 files in MSC mode and don't play them no problem at all.

  Driver to work on Windows XP may be defective or unsuitable for copy files correctly on the drive using the MSC mode.

  I do not know. At least, everything works fine now.

  P.S. The funniest is that tech support lady told me that my drive is ruined and it is absolutely impossible to fix.

  She also said that it is impossible to install the previous version of firmware absolutelly and that it not there no previous version of the firmware available more she also said that the only way to "solve" the problem is for me to buy a new player

  Everything just great!

  Every1 thanks for your help.

• After the recent windows update August 16, 2012, my connection to Internet is not working...

  Hello

  I use a laptop HP Pavilion with Windows Vista. August 17, 2012, my connection Internet has stopped working. He was showing 'Local' only against the State of the connection, even if my cable internet and routers wireless work correctly. I have connected to the internet from another computer using Windows XP.

  After having tried many options to solve the problem of the internet for fews and realizing none of them solved my problem: (, I decided to restore the computer to the factory settings on August 19, 2012.) But to my surprise, system recommended to restore to an earlier date (before these recent automatic updates are made on August 16, 2012). I thought to try and to my surprise, my connection Internet started working :).  Which made me think that something that happens in the recent update that is causing my internet connection does not work.

  At the beginning I was in doubt, but now I'm fully convinced as next morning of day again my internet connection stopped working again. I checked Windows update history and realized again automatically updates performed on August 20, 2012. I restored my computer to the previous version before updates again and the Internet started working.

  Here's what I see in the history of the update for that day.

  Update of security suites for Microsoft Office 2007 (KB2596856)

  Cumulative security update for Internet Explorer 9 for Windows Vista Systems (KB2722913) based on x 64

  Update security for Windows Vista for x 64-based systems (KB2731847)

  Update security for Windows Vista for x 64-based systems (KB2712808)

  Update of security suites for Microsoft Office 2007 (KB2596615)

  Update security for Windows Vista for x 64-based systems (KB2705219)

  Windows x 64-August malicious software removal tool (KB890830) 2012

  Can anyone help answer more?

  -What day could cause this problem?

  -How can I just remove this one update which may cause a problem (I'd like to get the other automatic updates in the future, so don't want to disable the auto update)?

  The guys at Microsoft told me, problem is introduced by McAfee.  Here is the link for the solution to the problem.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

  I didn't try it myself, as my internet problem is automatically solved in a few days. I think that my version of McAfee must have automatically been updated, which may have solved the problem.

• BDP 3100 Youtube freeze and Yupp TV does not work after the last firmware update

  Hello

  My Youtube app on the Bluray Sony BDP - S3100 drive freezes when I play any video. It says LOADING... and plays the video completely. But the Player hangs and I have to be able to market. This started happening since yesterday is to say 26/06/2013.

  The other problem is with the YUPP TV App.

  After my latest firmware upgrade June 4, 2013 live channels on the YUPP TV app does not work peoperly. It says loading and will market every 5 to 10 seconds. On demand videos are very good. This began to happen immediately after the upgrade on June 4, 2013 (M14. R.0136). but after that, there was a more updated firmware that says that connectivity issues fixed on 08/06/2013 (M14 Version. R.0138). I've updated on my player. Yupp TV questions are still there. YouTube has been fine since then, but then the Youtube above issue started happening since yesterday and I have reported to the Youtube community as well.

  Could you fix Yupp TV, I'm sure that updating the firmware.  Also please check if Yout tube is with the firmware...

  Let me know if you need additional information.

  Thank you
  RAM

  At least I'm not alone, until a few days earlier, alls well, now, I have the same problem, so that makes three of us.  New default factory setting does not so I think a firmware issue, all other channels & functions outside of youtube look... very annoying

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Satellite A40-231 does not start after the incorrect firmware update

  Hello
  I have a toshiba satellite a40 - 231.it unbootable because I flashed it's drive(sdr-6112) dvd - rw with the wrong firmware and I also made a mistake in making a non bootable back active partition, try to Flash the correct firmware. So my question is: can I boot from the usb flash drive? I think it's the only option I have left, if not network startup.

  Thanks in advance!

  Hello

  As far as I know it of not possible to start other devices from the USB FDD / HDD / CD-ROM / LAN

  You can boot from network, but if you want to install the OS via the LAN you will need a RIS server. But it's not easy to do without any additional experience. So I think that this option isn't for you.

  It seems that the drive is dead or is malfunctioning and that is why the best idea is to replace the device's drive. I know, it's hard to hear that, but I don't see any other solution

• Apple Watch don't pair after the recent software update

  I've just updated my software and now my iPhone and watch will not pair. Am I missing something?

  Hi Sam

  There is a difference between be unpaired and disconnection. When your watch dial a symbol of red phone with a line through it, it simply means that your Apple Watch has been disconnected from your iPhone:

  

  Disconnections can be normal. For example: your watch will be are disconnected from your iPhone if the devices are moved out of Bluetooth range or if your iPhone is turned off. If your watch is unable to connect to a Wi - Fi network known at the time (as a backup), it will be disconnected.

  The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect, try to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• After the recent Firefox updates prevent links to several websites to operate while it doesn't have this problem with other browsers - help please.

  Since a recent update of Firefox links to several Web sites is no longer working. They used to be fine and I liked Firefox. The problems do not exist with other browsers such as Internet Explorer, Google Chrome. Specifically, on talktalk.co.uk news links do not work, any more than those in 'my account '. On Barclays.co.uk the link to print my statement works no-same on MBNA.com
  There are several solutions proposed around the internet, but all are complex, so far none have worked and I don't see why I should have to make the suggested adjustments. Firefox has been great - now, it is not. The problem seems to be the update. Please help me get my Firefox where it should be.

  AFAICT then who are perfectly normal links on the news page

  The http://www.talktalk.co.uk/ opens if I click the guide Link TV/news on the https://sales.talktalk.co.uk/ page.

  If I right click on a link and use inspect element to open the Inspector then I see that there is an event onclick on the links (annex 'ev' button), so make sure that you are not blocking JavaScript.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• eBay does not not in firefox after the recent patch update shipment tracking

  on Ebay looking MYEBAY followed of package for purchases.
  Click the widow number thing open clock tracks follow-up and box remains empty
  works very well on MS internet explore
  running windows 8.1 latestest and firefox (autoupdate) on both.
  well operated until firefox did its last update.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then on clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• I can't see the music on my iphone after the recent OS update. All I get is a screen that says music

  iPhone version 9.2.1 6 s more
  All I get is a screen that shows the music.

  Double click on the home button and drag the application to the top music. Then hold down the sleep/wake and the "home" button until the Apple logo appears. -AJ

• After the recent Lightroom update froze on will grow.  Try to remove the p0rogram through CC cloud I was unable to remove it.  Then I deleted the program through the operating program.  I could not download the Lightroom through

  Where should I go from here?

  You're on Mac or Windows and what version?

  You make a good uninstalll using the operating system, or remove the program folder?