Incorrect FDT directory

Similar Questions

• myRIO install error TARGETDIR is undefined table incorrect directory

  During the installation of the software for myRio, I bought Aug 2014

  Disc 1 shows the screen of LabVIEW 2013, and the folloing popup error message

  TARGETDIR is not set, the Directory Board seems incorrect.  Abandonment

  I use windows 7 on this laptop, but received the same error message on my windows laptop 10.

  Check where you have the installation program located.  Here's a knockout who explains how to fix this problem:

  http://digital.NI.com/public.nsf/allkb/24E09BDC314EB93A8625758D004ECBC6?OpenDocument

• Error - Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect when installing any program.

  Original title: there is an error then that inistalling some programs such as, java, internet download manager and...

  There is an error then that inistalling some programs such as, java, internet download manager and...

  for example, I want inistall an application or a program like Java, but when I start to inistall, it works like adminstere then said: (Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect.)

  It even I mean to inistall Internet download manager and VLC...

  my pc is automatically updated and when updates are available whenever I download inistall,.

  Please help me, I love my windows Vista, tnx

  Hello Aliahriman,

  Please look at the post below and see if it will solve your "creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect" question.
  He has helped others with a similar issue.
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/3b180316-95c2-4613-8c38-8515481db22c

  If please reply back and let us know if this helps solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Packaging of FDT on windows error when you add the Active Directory in the package contents

  Hello!

  Trying new tools of FDT 5.5 for Adobe AIR, so far so good but I just encountered a problem when you try to add an Active Directory package.

  I add the shape of directory the FDT-> FDT AIR properties of project-> BlackBerry-> content tab package properties

  I click on add a directory and add the path to my Active Directory. (My current directory is in D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets)

  I then run a debugging, and I get the following error:

  Start debugging package.
  Package failed!
  Package failed: 1
  Error: File or dir does not exist: D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets error: file or dir does not exist: D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets

  There is a bug filed in Jira of FDT: http://bugs.powerflasher.com/jira/browse/FDT-2739 go vote for ;-)

  I get only this error when packaging of BlackBerry app, iOS or Android, everything is fine, so I guess that maybe it's a bug in the BB Plugin for FDT...

  If anyone has experienced this problem and know a workaround solution?

  Thank you!

  Yay, this has been fixed in FDT 5.6!

• Error - the file name, directory name or volume label syntax is incorrect. "(0x8007007B), when you exit the system restore.

  Original title: System Restore problems

  Hello, I am running Windows 7 Home Premium 64-bit classic mode.  My system specs are listed under my signature.

  Before installing a program today, I went to create a system restore point.  In system properties > System Protection, I see that in the Protection settings > disks available there are two instances of the C: drive tagged like this:

  HDD0 (C :) (System) Protection on (selected)
  HDD0 (C :) (Missing) Protection on

  This is probably due to having recently replaced my C: drive with a disk larger to help to restore from a System Image backup.  The installation seems to succeed.  (I use now!)

  Note: other readers in Protection settings are showing off Protection.

  When I clicked on "Set up" in system properties > System Protection, I have seen that in the restoration of settings, the box "Turn off active Protection" has been selected.  I put the option button "restore system settings and previous versions of files.  In space, the slider was set to 0.  I put it to 1% (857,54 MB).

  When I tried to leave the system of Protection for the dialog to HDD0 (c) I got this error:

  There was an unexpected error in the property page:
  The file name, directory name or volume label syntax is incorrect.  (0x8007007B)
  Close the property page and try again.

  I deleted all restore points, then created a new restore point.  Current usage shows now 29,48 MB.  I still get the error when I try to the OK from the dialog box.  When I click on the system restore and start the Restore Wizard that I can see the restore point, I just created.

  Any help to banish the fake player available and messages will be appreciated greatly.

  -Dave

  ASUS P7P55 Deluxe
  PC power & cooling silent 750
  Corsair CMX8GX3M4A1600C9 (x 2 4 GB DIMMS)
  ZT-98GES3M-FSL ZOTAC GeForce 9800 GT 512 MB GDDR3 256-bit PCI Express 2.0 x 16
  Drive0 (OS) SSD OCZ Agility 2 OCZSSD2-2AGTE90G 2.5 "90 GB SATA II
  Reader1 (data) HITACHI UltraStar A7K2000 2 TB 7200 RPM 0F10452 / MIN 32 MB of Cache SATA 3.0 GB/s
  Lecteur2 (Apps, pagefile, Misc) SSD OCZ Vertex 2 OCZSSD2-2VTX50G 50 GB
  Drive3 (Web data, configuration files Pgm) OCZ SSD Vertex 2 OCZSSD2-2VTX50G 50 GB

  Hey DaveMcKeen,
   
  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error message, follow the following solution:
   
  Step 1:
   
  To set the path of the appropriate Windows 7, restore point as follows:
   
  a. Click Start.
  The Start Menu appears.
  b. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  c. click on continue.
  The System Properties window appears.
  d. click on the System Protection tab.
  e. under automatic restore points, uncheck all invalid location or duplicate
  f. Click to check drive C: with the Windows Logo
  g. click on apply, and then click Ok
   
  Step 2:
   
  Create a system manually restore point:
   
  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  b. in the left pane, click System Protection, if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the System Protection tab and then click on create.
  
  d. in the System Protection dialog box, type a description, and then click on create.
   
  Reference:
   
  create a System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point
   
  System Restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• The directory name is incorrect

  I got a bad virus some time ago and after I got to dissolving a ton of weird stuff that happened as I can't install new programs I get the error "directory name is invalid" when I try to run the application to install.

  If necessary, do all the work with Malwarebytes in Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In my 1st answer, there is a link for access to the logs for SFC.

  And for the installation of repair, you will need to borrow a DVD of Microsoft Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also some info on the factory settings:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• New installation of windows server 2008r2 gives me this activation error: 0x8007007B - "the file name, directory name or volume label syntax is incorrect. Can someone help me to activate?

  Windows server 2008r2
  No role
  Dcpromo has NOT been executed
  new installation

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• The file name, directory name or volume label syntax is incorrect.

  I have a program which accepts command-line arguments.

  The diagram that I have adopted is that each command line argument is shaped like this:

  x:argument

  where x is a letter that corresponds to a switch (as a mode of operation and the argument is an argument that goes hand in hand with this switch).

  : is my separator.

  I came across a problem with the following command line:

  If I run the following directly from the Windows command line:

  "C:\Test\Program.exe" '-c:C:\Documents and Settings\maciej\Desktop\Measurement and Automation\test\current.cfg' - m::a

  Everything works very well.

  If I try to use the Exec.VI system:

  And pass the following string

  cmd /c 'C:\Test\Program.exe' '-c:C:\Documents and Settings\maciej\Desktop\Measurement and Automation\test\current.cfg' - m::a

  I get the error as in the title of the post.

  Someone has ideas how to operate system Exec?

  It seems that exec system analyzes the:

  "-c:C:\Documents and Settings\maciej\Desktop\Measurement and Automation\test\current.cfg.

  part... numbers that it is not a file name... I don't want to do that I know that it is not but it's still an argument invalid cmd for me.

  Maciej

  Try

  cmd/s/c "C:\Test\Program.exe"-c:C:\Documents and Settings\maciej\Desktop\Measurement and Automation\test\current.cfg '-m::a»»»

• Windows error: 0x8007007B; The file name, directory name or volume label syntax is incorrect. Topic: Windows could not be activated. I have the keys.

  I have the keys for all of my products to Windows, but this option was not for me.

  I don't know what that means.  Please someone help!

  Thank you in advance, my name is Heather

  Edit: Thanks for the responses, very helpful.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once saved, run the tool.

  Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  -in your own thread, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Try to save a text in a file, but the path of the file or directory may be incorrect.

  Could someone help me check the \\server\share\file_path, which is correct or not?

  FILE * f = fopen ("/ shared/documents/save.dat", "wb");
  {if(f==null)}
  fprintf (stderr, "Failed to create output. txt\n");
  _exit(2) (1);
  }
  fprintf (f, "Hello World!");

  The result is always f == NULL.

  "Remove the tip /, i.e." shared/documents/Save.dat' and you must have declared action access_shared

• Windows 10 in save for Web, "the operation cannot be completed the directory name is incorrect.

  There are a lot of answers for Mac and Windows 7-8, but none that I can find for Windows 10. It is not let me save for Web and I get the message, which is in the title of this discussion. I tried to reinstall it. I tried pressing Ctrl + Alt + Shift, did not work. I know this is probably a registry problem, anyone got any ideas?

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• New site created at the level of the incorrect directory

  New to Dreamweaver and CS5.  I went to create a new site, but I created it at the root-level many other files on my hard drive are appearing "inside" of the site.  I do not have any content created yet, has been named the site.  If I go to "Manage Sites" and delete the wrong site, it will remove all other content on the hard drive inside this site?  Just afraid to hit the wrong button and removing hundreds of image PS files.

  No, you're safe.

  Manage Sites simply manages the site definition (which means tell Dreamweaver, in his own unique language, where the site is located on your hard drive)

  Removing a site definition to manage the Sites simply remove knowledge of Dreamweaver site location.

  But if you have set wrong just level files, just change the existing site definition and locally, set the appropriate folder. It's nothing more than that.

  To delete the contents of the real site, you must:

  (1) intentionally remove a file (or files) via the Panel files DW

  or

  (2) remove the files with your operating system (excluding DW).

  Option 2) is not recommended. Use option 1) and DW will load your management of links in your web pages for you.

• Error in name of user/password incorrect when you copy files or from folders

  Our company uses a Mac Mini (with OS X Yosemite) and application server to share our internal files. We've had this set-up for year now with everything works well. As of late, however, we are more able to copy files or folders which are in all shared folders. Basically, when we try to copy any file or folder that is located in one of our share points, we get the error "Unable to connect to the server because the name or password is incorrect". This error occurs for each user account, including my own, that has been specified as an administrator account. We are able to add files and folders (e.g.: copy from our local computers to folders) as well as rename the files and folders that are located in shared folders. We can also create files without any errors, so I'm fairly certain it's not a permissions issue. In addition, I tried deleting completely all files and recreate their but not always the same error. I also tried to create new user accounts (accounts directory Local as the Local network directory) and the problem persists when you are connected to the server using these new accounts. I just don't know what else to do as this seems to be a software problem. Any ideas?

  Thank you

  OK, a little update. We have a mac (iMac) client computer that still works under OS X Yosemite. The user on this computer is able to copy files and folders without receiving this error. This same user has also a Macbook that runs El Capitan. Using the same network login for access to the server of their Macbook results in the same error message. All users who receive this error also run El Capitan on their Macs. With this latest development, I'm pretty much able to conclude that this error is the result of El Captain customers access to a shared folder on a server of Yosemite. What is curious is that I did not always have this error since the upgrade to El Capitan. I am sure that this problem came only in the last month or so leading me to conclude that either update to El Capitan (on the computers of our customers) or an update to Yosemite or the Server app) on the computer server has created this error. The issue is upgrading of the computer server to El Capitan solve this problem or am I in for a whole new can or worms?

• antivirus quarantined files in the directory of firefox as a malware program files

  These 3 files have been quarantined as viruses or Trojans heuristics:
  libegl.dll
  nssdbm3.dll
  webapprt - stub.exe

  All 3 files are in the directory program files for firefox. Once these files have been quarantined, and tried to launch FF I got error:

  Could not initialize the safety component of the application. The most likely cause is problems with files in the files of your application directory. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you leave the app and solve this problem. If you continue to use this session, you might see the incorrect application behavior when you access security features.

  Once I click OK it opens FF but it won't open the home page. I want to be sure that these are in fact FF program files and not a virus trying to wreak havoc on my laptop. Thank you.

  Unfortunately, I can not add troubleshooting information as I'm in THE writing of this since I can't open FF.

  Hello szzqz, yes judging by the names of single file, these are the files that come with firefox and which are necessary for normal operations - so it is very likely that it is a false positive of your antivirus software. just to be sure, please download the full version of firefox for your new system from the official source to https://www.mozilla.org/firefox/all/ and install it on top of your current installation, which will replace the missing files.