Incorrect function of disk - initialize - WD20EARX management

Similar Questions

• 'Incorrect function' during the initialization of an iSCSI target

  I have problems when you try to create a partition of 3.7 TB on Windows Server 2008 R2.

  

  I get the following error message when I try to initialize an iscsi target:

  

  What I am doing wrong.  The target is not part of a cluster.

  

  What I am doing wrong? I tried initilizating the disk with MBR and GPT time partitions and all do the same thing.

  Have you installed the software on the server (at least the host software) and establish connections iSCSI on two raid controllers? Looks like that may connect you to a controller, but the virtual disk is owned by the other controller.

• 'Incorrect function' error with my backup (I have Windows Vista)

  I have a problem filling my back up.  Even if it is scheduled every week the last completed upward was in 2008.  When I did this time it gave me the message:
  Incorrect function (0 x 80070001)

  What does that mean?
  Thank you!

  Hello
   
  1. you are using ' backup and restore the Center "or any other program to save the files?
  2. who is the edition of Windows Vista installed on the computer?
   
  This problem occurs when you click on a complete PC Backup in the backup Center dialog box and restore and then you click on create a backup now.
   
  To resolve this issue, follow these steps:
  1. start disk management. To do this, click Start, type diskmgmt.msc in the search box, and then click diskmgmt.msc in the list programs.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2 right-click the primary partition that you want to enable, and then click Mark Partition as Active.
  Exit disk management.
  3. restart the computer by using the Windows Vista DVD. Press any key to start the computer using DVD.
  4 set your preferred language and then click Next.
  Note: In most cases, the repair process starts automatically, and the System Recovery Options menu is not displayed.
  5. click on repair your computer.
  6. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair to start the repair process.
  8. when the repair process is complete, click Finish.
  9 restart the computer by using the hard disk.
  10. connect to the computer as an administrator and then try to perform the backup operation.
   
  For more information, see this link: http://support.microsoft.com/kb/950167
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A120 doesn't recognize CDr - incorrect function

  Hello

  I hope someone can help me?
  I just took delivery of the satellite pro a120. If I put a blank CD - r into the drive it does not launch the window asking how I want to open the butterfly?

  If I go via 'my computer' and "devices with removable storage" Exchange of ' ram «cd drive d» dvd drive However, if I click the icon it says "drive D is not accessible incorrect function.

  However, I can copy music through windows media he does not recognize the disc in windows media and will burn.

  However I can't copy files/photos, etc.

  The windows did not you because the Autorun feature could be disable or not properly configured.
  Check disk properties (right click) and select the AutoPlay tab.
  Here you select the prompt to be each time to choose an action

  Please check also this document from Microsoft:
  http://support.Microsoft.com/kb/826510

• Satellite A100-496: drive CD/DVD - incorrect function error

  Hello
  I am using Toshiba * Satellite A100-496 * laptop with Windows XP as operating system.
  When you use the CD player, I get the following error: -.

  * D:\ is not accessible *.
  * Incorrect function *.

  Can someone guide me to troubleshoot and identify a possible solution?

  Hello

  Go to the Device Manager and remove the drive from CD/DVD to the list.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the machine.

  I m not very well if this will help, but in many cases this work around was very helpful

• Error installing Fallout 3:-'Default functionality', component 'Fallout3', file: E:\data2 cab, error "incorrect function".

  Original title: 'Incorrect function' Fallout 3

  I have Vista 32-bit, all the elements for Fallout 3. It starts to install then a box pops up saying characteristic-'Default Feature', component 'Fallout3', file: E:\data2 cab, error "incorrect function".  I have the original disc, no copy, I cleaned the disc. I don't know what else to do?

  Hi tsp2u61,

  Usually, when you get this error, it means that your CD cannot be read.

  You can check if the drive works in another computer to make sure that the disk is not damaged.

  You can try to copy all the contents of the installation of the drive on the local hard drive and install from there and check if you can install

  a. right click on the desktop, create a new folder and name it as Fallout 3

  b. Insert the diskette in Fallout 3

  c. Click Start and open computer.

  d. right-click on the CD / DVD drive and click Open.

  e. press the Alt key and click on modify.

  f. click on select all.

  g. still once, press the ALT key and click on copy.

  h. Ouvrezledossier Fallout 3 on the desktop.

  i. press the Alt key and click on paste.

  Now try to install files copied on the desktop and check if it works very well.

  If this is not enough, you may need to get in touch with the help of the game maker.

  Bethesda Softworks Forums-> Fallout

  http://forums.bethsoft.com/index.php?/forum/40-fallout/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Popup error ' A:\ is not Accessible, incorrect function" when you try to read the "A" drive in Explorer.

  When you try to read a disk in the 'A' drive from Windows Explorer, I get a Popup with a white 'X' in a red circle and a message that "A:\ is not Accessible" "Incorrect function" and an OK button at the bottom.  It happens to any disk, formatted or not, with the files or empty.  I replaced the disk drive - no help.

  I don't know if it's a windows setting went crazy or a motherboard problem.  My BIOS seems correct.  If I do a 'fill' of window hardware in administrative tools he tells me that I have data on the disk.

  I have XP - SP3.

  Any ideas-

  go to a command prompt and type "sfc/scannow" (without the quotes) and let it run... see if this is helpful at all.

  Hope do you feel better soon.

• Cannot access CD-ROM to copy files or copy pictures on a disc. D; \is is not accessible. Incorrect function. Is the message I get. How can I fix this problem please?

  I get the message; D; ------isn't function of accessible.incorrect, whenever I try to copy anything either on a disk in the CD-rom Drive.I can play discs on the device, but if I try to ask a folder or my photo gallery, get the same message.  How can I fix this, please?  Stan shorts

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  See the bottom of the articles that might help you resolve this problem.
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  You receive an "Incorrect function" error message when you try to save a file from an Office program on a CD - RW or a DVD/CD-RW drive
  http://support.Microsoft.com/kb/905431

• M30: incorrect function error message

  My m30x will not read a cd - r, that I created on another comp. the error message D:\not FLEURIDAS appears and says incorrect function. should I be worrying. or is it just a damaged drive

  Hello

  I also had these problems when I burn a CD in my office and read in another PC, it is not recognized!

  After collecting information on the net, I had this conclusion:
  The CD wrter are becoming faster and each quick written CD has one or more failures! It depends on the CD burner!
  The manufacturer of CD is also an important thing! I tested different sellers of CD and found some brands that do not have so many failures!

  Sorry!

  TOK

• Satellite L20: drive does not recognize blank CDs - incorrect function

  My CD-RW/DVDR drive works perfectly as a DVD player, but when I insert optical media blank to copy a CD the drive is not automatically recognized by the computer (as it would when a DVD or CD is inserted).

  If I go to "my computer" and double click on the D drive and I get an error message saying "D:\ is not accessible. Incorrect function ".

  Hello

  This behavior is noticed by many users on various forums, and it is obviously not new. If I understand you right reading CD and DVD is not the problem.

  You can create CDs and DVDs using any burning software pre-installed? Does your drive read data self made and CD and DVD movie

• & quot; incorrect function & quot; error on PostUIMessageEx in Labview with the Labview runtime

  Hello

  I have a TestStand GUI developed in c#. Now, TestStand has some modules Labview which must send the UIMessages to the interface graphic (it is too deep in Labview code to bring back to TestStand to send the UIMessage).

  When I use the complete edition LabVIEW 8.6.1 development version, all right, I can see my messages. Now, when I go to run Labview 8.6.1, the node to invoke PostUIMessageEx gives me an error: incorrect function (error 1).

  I have tried restarting PC/TestStand/Labview without success. Is that all that I'm missing?

  Thank you

  Alex

  
  

• Windows XP SP3 - reader DVD - RW 'Incorrect function' on blank CD

  I get an 'Incorrect function' error on both of my readers of DVD - RW on Windows XP. I investigated the issue for a few days and came away empty-handed.

  1. I tried to delete upper/lower filters in the registry. This helped to ensure that they are detected but nothing else.

  2. I tried to update the drivers for the two drives via firmware update. This makes them as readers of DVD - RW instead of just the CD players, but I still haven't burn the ability.

  3. I tried to edit the registry in order to see a 'Registration' tab on the properties of the drive. Even after that change it, the tab never appears. I tried to switch between settings (1, 2 or 3) between each of the two drives, but it makes no difference in the combination.

  4. I ran various "Fix - Its", including one that claimed that the two discs were not able to burn. See #4.

  4. I tested two drives with third-party software, and they work much like the burners. However, the vendor I work with that requires Windows to be able to do the burning. I worked with them and they insist the problem is on my end and revealed no useful. I'll assume it's Windows and not their own software which poses problem.

  Any help would be appreciated.

  If they are IDE drives, SATA, make sure that the jumper pins are correct, if so,

  uninstall both in device mgr, restart, once thru, output, pc shutdown.

  Move the connections on a different IDE slot, reset the pins of the rider as needed, restart

  PC. XP will reinstall their restart. If the connection of different worked, cable

  or card controller pc are bad... In addition, update the chipset installation software

  for the Council, it gives xp drivers software to work properly...

• Cannot burn CD R or RW. Message "D: / not accessible incorrect function".

  Message that appears

  D:/not accessible"."
  incorrect function ".

  Hi Montecasso,

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "incorrect function".

  http://support.Microsoft.com/kb/315350

  I hope this helps.

• E:\ is not accessible incorrect function what is the cause? How to fix?

  I am trying to copy "my photo" on a CD - R or CD - RW.  After the selection of items to copy, a window will appear indicating

  "E:\ is not accessible.

  Incorrect function

  Hi j.k.glissmann,

  · Do you have any CD burning program installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the links below: how to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP: http://support.microsoft.com/kb/324129

  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "Incorrect function": http://support.microsoft.com/kb/315350

  With regard to:

  Samhrutha G S - Microsoft technical support.

• All of a sudden I can't copy my photos to a CD E:\is not accessible incorrect function

  I'm used to be able to copy my photos on a CD - R. I'm on Windows XP.

  After clicking on "Copy" a small window appears "E:\ is not accessible incorrect function. What causes this problem?

  Hello
   
   
  1 did you do any change to the computer recently?
   
  See the methods listed in the articles below and check.
   
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
  
  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "incorrect function".
  http://support.Microsoft.com/kb/315350
   
  I hope this helps.