Cannot burn CD R or RW. Message "D: / not accessible incorrect function".

Similar Questions

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• Canvio Basics 500 GB - F:\ error message is not accessible

  I just bought this drive ext and were happily transferring photos, suddenly this message appears:
  "F:\ is not accessible. The file or directory is corrupted and unreadable"

  What does that mean? Is he dead yet?

  I guess as the F: / / means the connected external HDD.

  You are able to access all data stored on the HARD drive?
  You are able to create a folder on the HARD drive?

  Please check this!

  Please also start the console command (CMD) line and type this:
  f:
  Press enter
  dir
  Press enter

  Now you should get a list of the data stored on the HARD drive.
  It work?

• Cannot access osha.gov and get message as not to go on the web site

  Original title: I can't go to site web osha.gov.

  Whenever I'm trying to go to the website of osha.gov the the screen comes to expiration and said he can't go to the web site.

  All I can do to stop this and log on to this site?

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot access osha.gov website and get the message that can not go to the web site.

   

  1. what browser do you use?

  2 did you do changes on the computer before the show?

  3 - is the full error message?

  4. the question limited to only this site or does it occur with all sites?

   

  If you use Internet Explorer, then changes to your Internet Explorer options might be preventing you to view certain websites. To check, I suggest you to refer to the procedure described in the site:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897#gM1

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Just installed firefox. connected to one of my accounts, g-mail, but cannot connect to a 2nd. Message: "cookies not enabled", but they are. What now?

  I just installed firefox. I was able to access my major account google mail, but when I try to access my second and third google email account, I get a message "not cookies are enabled". I checked and cookies are enabled, but I still get the same message. I'm not tech savvy and don't really know what to do now. I need to access my e-mail, so it is a major obstacle. I love Mozilla and really want to go back to IE. I've done everything that has been proposed, but the message persists. Not found an answer fairly simple in the forums. Please help.
  Here's the google mail message:
  We have detected a problem with your cookies settings.
  Enable cookies

  Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
  Cookies and empty the cache

  If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
  Adjust your privacy settings

  If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. To learn more

  It's confusing because you can log on to an account, so how could be disabled cookies?

  Maybe your Google cookies have become confused or corrupted. It would be interesting to compensation in order to see if that helps. Here's how:

  Everything a page on google.com (can be find, does not need to be Gmail), try either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.
  • Click on the globe or padlock icon in the address bar > additional information > "View Cookies".

  In the dialog box that opens, google.com should be filled up. You can delete all the cookies for the site individually here.

  Then try to reload the page and sign in again. Who help me?

• "" Windows Vista cannot connect to my network, error message "network not found path.

  I have a laptop Windows Vista, up until yesterday, I was able to connect and browse my network, now the computer shows just 3 computers, always in the same network, which connects in the same router, nothing has changed in the network environment, I can just browse the network, when I try to log in as \\[ipaddress] it says "path not found network". , but if I run cmd and type 'ping [IP address]' computers meet the ping.

  Can someone help me, thanks!

  Hello

  I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Latitude D610 - able to read discs, but cannot burn

  I have a laptop Latitude D610 I use for business purposes.  Once a month I have to burn word and Excel files on a disc to send to our customer.  Last month I went to burn and the drive is no longer burning the files to a blank disc.  I tried several discs, I also tried to reinstall the drive.  Today, I replaced the drive with a laptop replacement, we have on-site.  I'm still not able to burn.  Most of the time it will not detect a disk if the disk is empty.  Discs with the media are read without any problem.  Any ideas?  I want to get this working so I can't keep my boss for burning the computer loan.

  Latitude D610

  Windows XP

  CD-RW/DVD-ROM Dell Part #8W007-A01 (supplied with the machine)

  Managers of device says its working properly

  When I click on the drive with an empty disc, I get the message next - D:\ is not accessible. incorrect function.

  All other discs with media work very well.

  Message edited by cgillen on 03/26/2008 09:28
  
  

• Problems burning an audio cd by using windows 7. error message: windows media player cannot burn some files. To investigate the problem, click on the icon next to the selection to burn the files. (Nothing beside files?)

  I am trying to burn an audio cd after that installation of windows 7 upgraded with windows media player.  It will not work I get the error message. cannot burn some of the files?  very frustrating.  thanx

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Satellite U505 - S2960 - drive external Supermulti cannot burn

  I use Satellite U505 - S2960 and I bought just driver Toshiba external supermulti for burning of jobs.

  After I connected the external hard drive, it can read DVD but cannot burn a DVD.
  The USB Sleep and Charge page always pop up the same I disable so I just uninstall.

  It seems that the problem is not there...
  I wonder how can I do my laptop to work with my new external dvd burner that is the same brand...

  Either way, I am using Windows 7

  Thanks in advance for any suggestions

  Hello

  What exactly is the problem?
  Why are you not able to write anything on a DVD? Do you get any error messages?

  Sleep function & load allows to recharge USB devices like mobile phones or other devices using the USB port even if the laptop is in sleep mode.

  I put t see a link between sleep & charge and external DVD drive

  By the way; What burning software do you use? I use Nero. For me the best burning software

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• "Windows Media Player cannot burn the files to CD" error while burning a CD

  My Windows Media Player says "Windows Media Player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs.  I have burned several CD from Windows Media Player in the last year.  I used different brands of CD, since I first saw this message, but it continues to give the same message.  Whenever the burner starts to burn, I get this message.  What is the problem?

  Thank you for answering my question.   I understood the question.  In the burning options, there is a tab file types.  For some reason the appropriate boxes are not selected.  The burning process has led me to believe that I had a problem of burner or CD, while he was in fact the options.  Thank you once again.

• Cannot burn Audio or data by using Windows Media Player CD

  Cannot burn Audio or data on Media Player get an ERROR!

  Very well, I was burning cd I burned a couple and a third, I put the disc in and it showed that it is in their. I did my burn list and clicked on start to burn. He acted as if she was going to burn. It is on the first track for a minute or two then came red of lil DEPISTENT what ERROR which track this continues through all the tracks. I've ruined several discs. I tried to reduce the speed of combustion and that did not help at all. I also have problems with getting the DVD to read. Read some DVD movies and some will not. I did Diagnostics on the burner itself and it keeps coming back that it works correctly and everything goes well with the material itself. Please someone help me.

  Hi Leynak,
   
  1. What is the exact error message you get?
  2. don't you make changes before the show?
  3. when exactly the burn process stops?
   
  If the song is playing, but the burn process continues to stop when inspecting the song, try turning off the upgrade of the volume:
  1. click on the arrow below the burn tab, and then click More Options.
  2. turn off the volume apply upgrade across tracks on the CD check box and then click OK.
  3. try burning the CD again.
   
  Visit this link for more information: burn a CD or DVD in
  Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player
  Also check if Windows burn engine burns the disc without any problems. Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete.

  Original title: CD corrupts and burn it

  When I go to burn a cd with the music on this topic in windows media player, it starts very well. When it gets to 70-80% it stops and a window opens with this message.

  "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. »

  There is nothing burn but these files. I made sure there was nothing waiting to be burned. I closed all the other windows. I lowered the speed at which it burns. Nothing works I've looked up online. WMP is updated too.

  I can burn files very well. Photos and documents, I have a problem with. It cannot therefore the CD burner (not completely, anyway). I can listen to the songs on the CD where it suddenly stops.

  If anyone has had this problem, a solution would be greatly appreciated.

  Thank you

  Hi Cory,.

  This problem can also occur when your computer correctly detects the disc as a non-recordable device. Make sure that the registry key is set correctly for DVD player.

  CD - R or CD - RW drive is not recognized as a recordable device (valid also for Windows 7 steps)

  http://support.Microsoft.com/kb/316529/en-us

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/en-us

  How to back up and restore the registry in Windows

  I hope this helps.