Incorrect response from the SOCKS server deploy when debug_token.bar
I created the debug_token.bar
and try to deploy it to the device. (Device Manager blackberry can recognize the device)
I called
/ Motion Developer/SDK/Research\ In\ / BlackBerry\ 10 WebWorks\ SDK\ 1.0.4.5/dependencies/tools/bin/blackberry-deploy - installDebugToken /Users/myname/debug_token.bar 169.254.0.1 - password mydevicepassword
After 2 or 3 minutes, it reported:
Error: Unable to connect: incorrect response to the SOCKS server. Check the settings of IP address for the target. Try to ping the target.
I ping peripheral ip to 169.254.0.1
He responsed:
Ping 169.254.0.1
PING 169.254.0.1 (169.254.0.1): 56 data bytes
64 bytes from 169.254.0.1: icmp_seq = 0 ttl = 255 time = 2.406 ms
64 bytes from 169.254.0.1: icmp_seq = 1 ttl = 255 time = 0.881 ms
64 bytes from 169.254.0.1: icmp_seq = 2 ttl = 255 time = 0.803 ms
64 bytes from 169.254.0.1: icmp_seq = 3 ttl = 255 time = 0,869 ms
64 bytes from 169.254.0.1: icmp_seq = 4 ttl = 255 time = ms 1,080
64 bytes from 169.254.0.1: icmp_seq = 5 ttl = 255 time = 0,848 ms
64 bytes from 169.254.0.1: icmp_seq = 6 ttl = 255 time = 0,823 ms
64 bytes from 169.254.0.1: icmp_seq = 7 ttl = 255 time = 1,175 ms
64 bytes from 169.254.0.1: icmp_seq = 8 ttl = 255 time = 0,893 ms
64 bytes from 169.254.0.1: icmp_seq = 9 ttl = 255 time = 1,130 ms
64 bytes from 169.254.0.1: icmp_seq = 10 ttl = 255 time = 0,860 ms
64 bytes from 169.254.0.1: icmp_seq = 11 ttl = 255 time = 0,819 ms
even though I checked ndk ide, the device has been connected
He likes without any problem, but cannot deploy token
Welcome to any comment
Have you tried to deploy from the NDK since it is able to connect? It could be using the connection, prevents your order manually run to connect.
Tags: BlackBerry Developers
Similar Questions
-
NB200-h-13 - no response from the DNS server and gateway
Hello
I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAYThe connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.
Hi abk55,
What program you receive this error message?
Have you tried another browser, for example Firefox or Opera?I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
Also, try to disable the filtering of MAC addresses and use another encryption. -
Cannot cancel the plugin from the administration server deployment?
Hi all
When I was tring to cancel the deployment of plugin of 12 c cancel after the deployment of all the plugins to the agent, he failed and error: "Plugin sohudba.mysql.test:12.1.0.1.0 is deployed on 1 host, it cannot be cancelled. 12 c user interface, there is actually no any deployment on any agent.
What should I do?
Thank you
SatineHave you tried to use the EMCLI tool? In one of your lines of command WHO, run emcli and search for undeploy_plugin_from_server
Docs: http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli_verb_ref.htm#sthref1388
Have you looked at any of the points of view in SYSMAN over who would host the renegade? Check the GC$ CURRENT_DEPLOYED_PLUGIN for the guilty plugin :)
-
Response from the RADIUS server
Hello
I added a controller to the ACS, as an AAA client then set the ACS in the WLC, but I can't be able to authenticate the users of ACS only local users on the WLC how can I get on it? help please.
The 'bad request to NAS' usually indicates incorrect shared secret parameters. Please
check or reconfigure the secret shared on the controller and the ACS for this SIN, do not copy and paste.
-
Someone at - it will meet it before? Of course it is in a LAB environment, but what a Win 2012R2 VM is simply not cooperate... lol
I tried to vMotion there something hot but even. Other virtual machines, 2008 R2 can obtain a static IP address fine as well as works fine. It is the only 2012R2 VM in the LABORATORY.
No 'ghosts' NIC or whatever it is. It's a new generation of machine virtual Windows.
Thank you
EDIT:
I use the VMXNET3 card.
Figured it out. Someone added an IP in DHCP address range rule "out for delivery" and they used the whole range of... lol
-
No response from the server when you try to publish the page.
My site was working fine last night but this morning that it does not load and im getting an error "no response from the server" when I try to publish it.
www.joshuasisneyphotography.com
I don't have much experience with that kind of stuff. Please help me. I don't know what I have to do. My internet connection seems to work very well and like I said the site was fine a few hours ago.
Hello
Please try to delete the temporary files for Muse and then try to publish the site again.
Here's a post on the forum related on how to clear temporary files: http://forums.adobe.com/message/5086018#5086018
Hope this helps you publish the site.
Rgeards,
Fox
-
No error response from the server when the file transfer
Hi, I just changed my Web site a server based on windows to linux. I was not in trouble, and now I can't get my files to load on the server. I contacted the server provider who has tested the things to their end and say that the problem is with dreamweaver. This is the message I get...
n response o server when the transfer of file... reconnection.
It is said that it is to put the file, and then I get this message again...
no response from the server during the transfer. 2 attempts. Retry or cancel?
If I hit Cancel, then he starts to put the file and it will sometimes, sometimes not.
Now, if I managed to pass the file, when I post it on the web and click on the link it says the file is damaged or corrupted.
Someone has any idea how to solve this problem? I'm new to web design and dreamweaver and I thought that maybe the problem is related to the definition of my site, but I don't see that there is a problem. I noticed that before I changed the definition of site for the linux server I could easily preview my pages in the browser without having to post it on the site. Now when I try to preview my page it says that I have to put on the site to view. Which could be related?
I work on a Mac and you have not installed a firewall.
Any help is very appreciated!
Thank you!
In the Site settings (Advanced Mode) it is an option when configuring the remote for passive mode FTP connection. Try to check that box and see if you are able to connect.
-
I have an application that sends emails when running. Off late a user when he tries to send a mail it receives the following error message...
"System.Net.Mail.SmtpException: unavailable mailbox." "The response from the server is: 5.7.1 error: content rejected '...
Note that this happens when he tries to send mail to itself and not otherwise. Can someone here on which could mean the error? Thanks in advance... :))
Error code is generated in the back-end.
'System.Net.Mail.
to System.Net.Mail.
to System.Net.Mail.
to System.Net.Mail.
to System.Net.ClosableStream.
to System.Net.Mail.MailWriter.
to System.Net.Mail.SmtpClient.
Hi guys,.
Thanks for the reply!
I contacted my sources by taking care of the servers and realized that the user was an id in which the address of the server was not set up with our servers in domain. He used to connect to our servers using the VPN client. This is why he could not send mails to id field not (in this case itself).
-
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?
It is one of the many problems that occur on my mac.
Update of OS X El Capitan 10.11.4?
1. backup Mac.
2. install 10.11.4 combo update.
https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US
-
Satellite Pro P100: Wlan with no response from the server proxy C-27
I have a laptop model Satellete Pro P100 and tries to connect to a wireless router.
I was able to connect to it over the past four months.Last week, I connected to a wired network and now he refuses to re - connect to my home wireless network. He acknowledges that I am connected but connectivity doctor says "there is no response from the server proxy (c-27).
A friend in the House is able to connect to the internet with their computer without problem.
I have tried everything I know, but need help please. Thank youHello
Have you checked in the properties of Wlan settings and the TCP/IP properties?
Please check if the options: IP automatically get an address and get server address DNS are automatically set correctly. -
I've implemented all the information for an email from the Charter and then when I click on get mail, it says there is a connection to the server error... Why?
Hello ChevyDriver10,
Thanks for your post. What email app do you use to receive your mail?
In the meantime, take a look at the Charter of General electronic installation instructions.
If you do not currently have an e-mail client, feel free to go on Windows Live Mail.
See you soon
-
No response received from the Symantec Server during activation.
OT: Network network adapter Ethernet NIC wireless networking device
I just bought Norton 360 5.0 and I can't activate it by Symantec. An error saying "No response received from the Symantec Server" I have no internet connection, but do not understand why this happens? This computer is Windows 7 Home Premium. It is connected to Linksys wireless - G wireless adapt, but as I said I am able to get on the internet like MSN, Facebook, etc.Hi LaraAngold,
I suggest you try the following steps:
https://solutions.Symantec.com/sdccommon/ASP/symcu_defcontent_view.asp?ssfromlink=true&sprt_cid=c64ef7a8-111C-47d7-88ef-b8e50c5cbd0f&docid=20071025144354ENIf the above steps fail, you will need to post your question in the following forums.
http://community.Norton.com/ -
PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.
Hi Graham,
If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.
In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets
I hope this helps!
Emily
-
Cannot send an email "response from the server: Message contains spam...»
One of my email accounts cannot send an email... And the message came
"Response from the server: Message contains spam or virus or the sender is blocked: field32_1e2afb1a2cd02.
It is said to select another off from server...
I did something wrong, or is there a setting I need to change?
Thank you
Yes it has been fixed, thanks
Maybe you are looking for
-
When I try to renew my IP address I get the error: the rpc server is unavailable.
I'm not getting Ip Add. in my laptop. When I try to renew the ip with IPCONFIG/renew it gives error the rpc server is unavailable. If I try to start this service in services.msc, that she does not get any changes. Thank you & best regards Aniket
-
installed windows xp now nothing on my computer is recognized. Need help please!
OK so I installed windows and now it doesn't recognize anything on my computer. When I go to 'Start', 'Run' and type dxdiag it shows n/a for the graphics card and s/o to the sound card...
-
Hello, I have recentlt noticed on my screen that my sb2 is not connected to my phone more so I reset the band now flashing blue and vibrating like crazy? Can not solve it
-
HP 3330 Laser printer does not print
Printer does not print
-
Hello is it possible to connect telnet to specific vty line. line vty 0 3 Cisco password ! line vty 4 password 123 If so, how. Thanks in advance Joe