increase in file size control

Similar Questions

• to stop the increase in file size

  Acroform file size was about 125kb. One day dy the increase in file size. How can I stop it. The file size is now 550kb.

  In addition, I tried to reduce the size of the file with the optimizer, but nothing happens. There's still 550kb. How can I reduce the size of the file also?

  I'm confused that this tpics could not in there.

  Do you save or "save under"? There is a difference, as mentioned previously.

• Deleting a group to a TDMS file increases the file size

  Hi all

  I was searching for information on how to delete a group in a TDMS file. Apparently this is not a simple task as I thought because firstly, it is necessary to convert the TDMS file in a TOC file, remove the group from the TOC file and finally convert the TDM in PDM file. There is a sample project really nice here (I have attached it in the post anyway!).

  This project works very well. Indeed, I am able to remove the group from the PDM file. However, I realized that perform the deletion process increases the size of the file (about 4 times). If you are viewing the PDM with the PDM file - file Viewer.vi you realize that several strange properties have been added to each channel of all other groups. I assumed that this is partly the cause of the increase in size.

  Anyone know why this is happening?

  I'm using LabVIEW 2014 and I downloaded the project for 2014 LabVIEW.

  Any help is appreciated to higlhy.

  Best regards

  Diego Ballen

  The old way was to read each group that you want to save and write to a new file. The fundamental problem is that TDMS format has been optimized for speed and no memory efficiency, which can cause a lot of complications when you seemingly simple things - like the deletion of data, or reading the data of the file.

  That is why NEITHER came up with these new features. If you're stuck with an earlier version, you can always write your own function to do the same.

  Mike...

• Why Photoshop to compress my file size?

  I am trying to record a poster of the event that I worked on. It is a picture of A6 12.7 MB (10.6 cm x 15 cm at 300 dpi).

  However, when you save the JPEG and PNG file even it compression up to 545 KB - obviously I can not send it to the printing press! Does anyone know what I need to change?

  

  

  

  Compresses the image in jpg format and will be a small file when you have large areas of color, so it's normal.

  TIFF will increase the file size, but tiff or jpg are the best choice for print, since they all have two pixellisent type. (change vector to pixels)

  Save the file in PDF format - happen type clear and vivid.

  If all what you have now is flattened, jpg or tiff, there is no going back to vector type - you must start over.

  But if you have a file with the type on its own layer, you can save it in PDF format.

• File size of control

  Hi gurus,
  
  Is there any eligible size that a control file should reach? My control file is 28 MB, I take RMAN backup for the database, the size of my db occupies approximately 150 GB and the number of archives get generated is 30 GB every day. Is that what all caution anxiety if the control file size continues to increase. Please notify.
  
  Kind regards
  Aurélie
  
  P.S - I can't create a catalog because of infrastructure problems and my parameter control_file_record_keep_time = 7. My db version is 10.2.0.4 and OS version is windows 200 (edited to add versions)
  
  Published by: AjinkyaSH on February 25, 2010 23:13

  Is there any permissible size that a control file should attain to?? My control file is 28 MB, I am taking RMAN backup for the database,my db size is around 150 GB,and the number of archives getting generated are 30 GB everyday. Is there any caution of worry if the control file size keeps on increasing. Please advise.
  

  I see no problem with that. Don't you see that the size is constantly increasing?
  The size of the controlfile to the database on my laptop is 10 M (approx.) and database is in noarchivelog mode.

  D:\app\sakumar\oradata\santu>dir
   Volume in drive D is Local Disk
   Volume Serial Number is 412C-78E9
  
   Directory of D:\app\sakumar\oradata\santu
  
  02/01/2010  11:33 AM              .
  02/01/2010  11:33 AM              ..
  02/10/2010  12:18 AM         9,748,480 CONTROL01.CTL
  02/10/2010  12:18 AM         9,748,480 CONTROL02.CTL
  02/10/2010  12:18 AM         9,748,480 CONTROL03.CTL
  02/10/2010  12:18 AM       104,865,792 EXAMPLE01.DBF
  02/10/2010  12:18 AM        52,429,312 REDO01.LOG
  02/10/2010  12:18 AM        52,429,312 REDO02.LOG
  02/10/2010  12:18 AM        52,429,312 REDO03.LOG
  02/10/2010  12:18 AM       641,015,808 SYSAUX01.DBF
  02/10/2010  12:18 AM       723,525,632 SYSTEM01.DBF
  02/10/2010  12:18 AM        20,979,712 TEMP01.DBF
  02/10/2010  12:18 AM       536,879,104 TEST01.DBF
  02/10/2010  12:18 AM       167,780,352 UNDOTBS01.DBF
  01/27/2010  05:06 PM         5,251,072 USERS01.DBF
                13 File(s)  2,386,830,848 bytes
                 2 Dir(s)   6,531,801,088 bytes free
  

  On one of my (almost) (AIX) server of the database idle has depending on the size

  /ctrl/TCRDB$ls -ltr
  total 168144
  -rw-r-----   1 oracle   dba        28696576 Feb 26 14:05 control03.ctl
  -rw-r-----   1 oracle   dba        28696576 Feb 26 14:05 control02.ctl
  -rw-r-----   1 oracle   dba        28696576 Feb 26 14:05 control01.ctl
  
  /ctrl/TCRDB$du -sm *
  27.37   control01.ctl
  27.37   control02.ctl
  27.37   control03.ctl
  

  In your case I don't know the size of the controlfile as a concern. If you want to see the content in the control file, just empty the contents.

  http://www.Ixora.com.au/notes/controlfile_dumps.htm

  Kind regards
  S.K.

• VI suddenly increased file size

  I got a main vi file size of about 160 KB for several days now. All of a sudden today after (maybe after slightly changing my sub-VI-not sure about that), the size of the master file of the vi has suddenly turned up 18MB! Why is this happen and how do I get that back to normal (if normal is fine)

  In general, this happens if you set a value of contol to have a default value that contains a lot of data.  If you have a table control and set to have a default value that has been a very large painting, for example, LabVIEW to store everything that data within the VI.

  Another possibility is including images on the flowchart Panel or front.

• BlackBerry Smartphones how can I increase the maximum file size allowed on the media?

  Whenever I have record video using the video camera, after a very short time it will stop recording and gives a message 'maximum size of the file reaches. I've adjusted the settings to save in 'Normal' mode, but while recording appears in last a short time, the result file size is way too big to be able to easily send to contacts. When you use the MMS mode the recording time is much too short. Is it possible to increase the maximum allowed size of the file so that a resulting video would be about 3-4 MB or less?

  You can download any software video conversion on the net. just try this one "Freestudio".

• TIFF LZW file size increased?

  I'd like this handled by my expert colleagues of imagery. Created a very large TIFF of a painting that I photographed. The final tiff file without any compression was 645 MB (16-bit Prophoto RGB file). When I saved the same file for my client, this time adding compression LZW tiff file, everything the same, it's around 850 MB.

  I do this on a Mac, the latest versions of Yosemite and Photoshop CC 2015.

  I never noticed that by selecting compression LZW would increase the size of the file. Then... I'm deliver the file to my client without compression, because the file opens faster this way (and it's smaller!).

  Anyone has an idea why LZW would increase the size of the tiff file?

  Scott,

  I think you can refer to link below for compression LZW in Photoshop.

  Re: Recording TIFF with LZW compression results in larger file size.

  See you soon!

  Florian

• File size has increased by 500%?

  Hi all:

  Asked me to add some vectors composition of a photo image. I therefore took the photo in image 5 MB and add about 2 lines of text and created the contours of them.

  When I registered and went to e-mail it to the cutomer the file size is now 92MB?

  What I did to make this size? All I can tell you is that I changed RGB to CMYK, you think maybe he did?

  Thanks for any help or advice on this subject,

  Paul

  If I understand correctly:

  You have opened a RGB. 5 MB JPEG image in Illustrator. Converted to CMYK document mode, added text and saved a file I.

  The increase in size is normal.

  A possible workaround solution. Open the AI. Click on the image in the links Panel. Link back to the original RGB JPEG. Save money, click PDF compatible file and make sure include linked files is turned off. Now send AI, JPEG or both.

• Increase the huge file size.

  So I've recently updated for first Pro CC 2015.3. I was doing a video which is 40 seconds long. The only thing in the video is the text and music. I exported using the same setting that I used in first Pro CC 2015. With first Pro CC 2015 the size of the file is usually around 200 MB. With first Pro CC 2015.3, the file size was 4.7 GB. I was wondering if there is anyway to make it back to what it was before. Thank you!

  File size is determined by length, bitrate, and only two things.

  If you want a smaller file, you'll need a shorter program, or a lower rate.

• SWF file size increases considerably when animated

  I'm trying to apply a simple animation to a project in Flash 8. The project consists of a single piece of work, any vector, which boasts a very simple animation to walk across the stage in moving horizontally.
  
  When the Flash file is NOT animated, and I publish the SWF file, it is about 10K. However, when I create a single image key and tween, so that the work will be going on the stage, the resulting SWF file is about 300K. I do not understand how to add a single keyframe would be the large output SWF.
  
  Later, I tried an experiment and turned the vector illustrations in a PNG file. When I hosted this, I don't have the problem of inflation of file size. I think that this work of vector would almost always smaller than bitmap images files.
  
  Someone has an idea of what I'm doing wrong here? I think that such a simple animation would add only a small amount of information on the SWF output.

  make a movieclip instead of a chart

  graphics do not save space.
  --
  Jeckyl

• File size a massive increase in Captivate 2

  I just finished reviewing a manifestation of the old.
  
  1. the old film, worm 1.01.1418 (42 slides), is 36, 900ko.
  2. the new film, ver 2.0.0 (57 slides), is 338, 638 KB.
  
  Both have audio, notes, text captions, and highlights.
  
  The only big change is that we use the new captioning function.
  
  Someone else has met and solved this problem?
  
  I don't think that I can break it in enough segments without making end users lose interest and I think I have to Snag Screenprints and recreate in Adobe Presenter.
  

  Captivate support found the answer to my problem and it is in the LIBRARY of the current file.

  With the .cp file opens and the LIBRARY pane visible, look at the toolbar of LIBRARY.

  1. Select the tool SELECT the UNUSED ELEMENTS.
  2. THE ITEMS will be highlighted in blue.
  3. Select the REMOVE tool.
  4. prior to the economy, overview of the project (F4) to ensure nothing necessary has been deleted (just a small step paranoia)
  5. close and exit to check file size reduction.

  Reader Digest Version: prior to publication, to delete unused items.

  Note: If you try this and it solves your problems, send praise to Bruce Chizen, CEO of Adobe.

  We strongly believe in for Training Solutions Adobe products (presenter, Connect, Captivate, Robohelp and soon CS3) and encourage us to use throughout our society. When I expressed my frustration of not being able to contact support in due course on this issue, Mr. Chizen came through.

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• Why the same photo's file size different in Photos and in the Finder?

  I have a photo size 4608 x 3456. When I open the file information in the Apple's Photos app, it says that the file is 7.8 MB. When I open the same photo in the Finder and look at the news file, it is said that it is 3.1 MB on the disk. Why does this happen? All other metadata is the same in the pictures, Finder, Lightroom or Photoshop, but I can't understand why the file size seems to have changed since I dragged photo pictures to the Finder.

  Thank you.

  How you view the photo in the finder (you shouldn't be messing around inside the photo library)?

  If you export or drag / drop you create a new file with a different compression - using export allows you to control what

  LN

• FILE cannot BE DELETED, the file size of the file type 'file' "0 bytes"

  I downloaded a music file of myfreemp3.eu, he wasn't .mp3.  He was able to play a couple of times, but now does not open.  Now, I can't move or delete it from the downloads folder, system do not see.  its properties are of TYPE 'file' and SIZE '0 bytes. "  Error message is "unable to find this article. It is no longer in xxx, etc.

  I tried many suggestions to remove it without success.

  I have Vista 2007 service pack 2.  I tried in safe mode, tried to move to another folder, tried to run without windows, search, folder to never display thumbnails, tried Mandrake Move, but it was outdated, orders back cmd has tried to delete. Also tried to delete with disabled explorer.exe.

  Any suggestions?

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/file-cannot-be-deleted-file-type-file-file-size-0/60d88d01-CD74-4f47-976e-f5d2cb3dc7a1 >

  Thank you Ganesh and Hetti.  I just finally deleted my ghost file.  I used the safe mode and cmd.

  I went into the directory of downloads in the BACK, the used command DIR / X to find out the name of the file.

  He was ~ 1 at the end of the file name.   I used DEL filename ~ 1 and the file disappeared.  I checked the

  trash and he wasn't there either.  I rebooted the computer and found no trace of the file.

  The controls were as follows,

  CD C:\users\my name\downloads

  dir / x (to find the full file name,)

  del (to remove the file)

  I could probably use alternative command

  del *. *.

  Thank you again and maybe it helps someone else.  I ran the control with the repair disc, but that did not remove the ghost file.  I could also not delete the downloads folder.  Create the same named file with 0 bytes not working anymore.  I tried the latest version of Mandrake then.