Similar Questions

• ESXi 5 - increase the disk space

  Hello

  
  Info:

  Size of the disk hard server: 4 TB

  What are the limits on the increase in size of virtual machine disk space Windows Server? For example, if C: win2k8 is 80 GB, can I increase to say a maximum of 4000 GB (eg. only 1 VM on the host)?

  I get a new server and I would like to give the VMs small readers and increase disk space needed in the future, if necessary. How will I know how much space the augmentable drive by?

  If I start with young readers, does this mean that I won't be able to increase the disk space, as well as virtual machines with more readers?

  Thank you

  Sorry, my bad. The size of the virtual disk does not depend on the HW version, it's just 5.5 ESXi and VMFS5.

  In any case, some words of clarification:

  • You can create virtual disks with up to 16 TB, in c# Client
  • Large virtual disks > 2 TB-512Bytes (with up to 62 to 64 to no) are not officially supported in c# Client, even if this can work for drives <=16TB (see=""> vSphere 5.5 storage improvements part 1: 62 TB VMDK)
  • Note: You cannot manage VMs with HW version 10 in the c# Client.

  André

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to solve the problem of VMWare Workstation 8 - unable to open/dev/vmmon

  Initially, I had this problem in March 2011 after installing VMWare Workstation 7 on a lab machine 5.7 RHEL and attempt to boot an image I know was good and should work. .  Someone else fixed the problem for me - I think they had to install a new/different libraries (vmmon.o and vmnet.o for vmware).  However, I find no information detailing what has been done to solve the problem.

  I see the same error on the same machine after upgrading to VMWare Workstation 7.0 for VMWare Workstation 8.0.

  1 here are the mistakes I see:

  a. "Could not open/dev/vmmon.

  b. "failed to initialize the surveillance apparatus.
  c. "cannot change the power state of VM: cannot find a valid peers to connect to.

  Also, when I run the stop etc/init.d/vmware, then run /etc/init.d/vmware start, I see that the State of "Virtual Machine Monitor" is DOWN.

  
  2 here is the information on VMWare Workstation:

  VMWare Workstation 8.0.1 build 528992

  3 here is the RHEL uname - information for the host:

  2.6.18 - 274.7.1.el5xen Linux #1 SMP xxx.xxx.xxx kills Oct 17 12:06:22 EDT 2011 x86_64 x86_64 GNU/Linux
  Release of RedHat Enterprise Linux Server 5.7 (Tikanga)

  The problem could be that the version of vmmon.o and vmnet.o that comes by default with vmware does not work with linux kernel version I have on my system.  I think I need to build a new vmmon.o and vmnet.o on my particular 5.7 RHEL.

  I found that to build a new version of vmmon.o you Executive vmware - config.pl.  I have not just on my machine, and I was not able to find on the internet.

  Here is the version of vmmon.o (for RHEL 5) that I have installed on my machine:
  /usr/lib/VMware/modules/binary/BLD-2.6.18-8.EL5-x86_64smp-RHEL5/objects/vmmon.o

  Here is the version of rhel5 I use:
  2.6.18 - 274.12.1.el5xen
  It is possible that the vmmon.o using bld - 2.6.18 - 8.el5 - x86_64smp-RHEL5 is not compatible with the kernel 2.6.18 - I 274.12.1.el5xen.

  Please help me find vmware - config.pl so I can build my own vmmon.o and vmnet.o

  do not use a kernel XEN enabled when you install Workstation

• How to increase the size of the disk partition VMware Studio.

  Hello

  I installed the VMWare Studio unit on ESX 4.0 host system. I've been running more disk space for builds, so I wanted to provide more space for the SCSI in ESX, Edit-settings of the Virtual Appliance. I increased the size to 256 GB SCSI disk.

  I then went to the guest VMWare Studio system, and the device/dev/sda5 displays always only 30 GB, and 12 GB is exhausted. How can I make the Guest OS from VMWare Studio unit see the increase in size?

  I tried to use "parted", but this fails because/dev/sda5 is mounted. "' I can't umount/dev/sda5 as/dev/sda5" is ongoing. " I am aware of the 1004047 of the Knowledge Base article, but it is of no use, because is not specifically for VMWare Studio unit.

  Thank you.

  If you have a lot of disk space on the ESX Server, yes creating and adding a new virtual disk (vmdk) to the VM Studio is the way to go. Mount the new drive for the Studio colleagues OS (Ubuntu), and the key is/opt/vmware/www/build simple installation on the new disk to create the new space drive for Studio use. Don't forget to back up your existing data in this directory first. See http://communities.vmware.com/thread/244715?tstart=0 for the similar explanation. Let us know how it goes.

• How can I increase the disk space

  Hello world

  I am new member communities and virtualization technologies.

  In my office, there are 2 esxi servers and they are mirrored with veeam server. All servers to have converted from physical servers to virtual machines using vmware. We have a problem with the exchange servers that there is not enough disk space. Normally I have to turn off the exchange server and type the new value. I need suggestions on these steps.

  Thank you

  You can increase the size of the virtual disk with the virtual machine... Take a look at this blog post for instructions: http://blog.pluralsight.com/resize-vmware-windows-server-drives

• Increase the disk space on a virtual computer which was extracted

  I have my computer running virtual Windows 7 checked. I then checked back in the VM. I need to increase disk space on drive C (the winSxS directory seems to never stop growing). But there is a snapshot on the disc 'View Local Mode of instantaneous anchorage'. What are the consequences of the removal of the snapshot myself in order to increase the size of the disk? Throw this out of sync between my laptop and the virtual computer and require all of ~ 30 GB to download again?

  Hello
  If a replication extracted from a desktop computer, a snapshot of the local desktop is created and then the changes are replicated with the data center.
  If you delete the snapshot, you ensure that you validate the changes.  This force probably allows you to download all of the Office during the next Check-Out operation.

  Best regards

  Patricio Cerda

• Reference Dell poweredge r530 - increase the disk space

  Hello

  We currently have a Dell Server poweredge R530, with installed 5 hot swappable drives with RAID 5 configured. I need to increase disk space for our virtual machines, bought an x 2 extra 1.2 TB SAS drives to install. What is the correct process to add 2 new readers to the table and increase the space available in the 2012 R2 windows server? Could someone sanity check process below please:

  1. install the 2 new drives while the server is powered and operating normally. (What I have to install 1 player and wait a while, or two disks can be installed directly after the other?)

  2. go in dell iDRAC and confirm the visibility of 2 new readers.

  3. wait until the readers successfully have been added to the State through iDRAC Tracker

  4. go in the management of the storage within the 2012 R2 server to allocate new space for the virtual machine partitions.

  Is more correct? It feels like I'm missing an essential step, it cannot be that simple that it allocate the additional storage space on a live production server?

  Any advice appreciated

  Thank you

  1. the two drives can be added at the same time.

  2 iDRAC is not the best way to do it. Unless this is your only access to the server, use OMSA leave within the OS.

  3. the process is not automatic. Once readers show up in a State of PREPARATION, you will need to go to OMSA, PERC, storage, virtual disks and select Reconfigure in the drop-down list of tasks available for RAID 5. (In fact make the statement reconfigures / expansion was the 'crucial step' you left on your list of ;).))

  4. Yes.

  Are your 1.2 to existing disks SAS drives?

• Increase the disk space

  My C drive has 5% free space. and my drive D "New Volume" 93% of free space. When I right click on drive C 'Player Extend' option is not usable. How can I increase the capacity of the C drive? I tried shrinking the D drive, thinking it would give me the ability that I could use to extend the C drive, but that did not work.

  To extend the Windows partition, free space must be nearby and located at the end of the partition, you need to develop, in this case your Windows partition. Disk management cannot shrnk forward of the partition (the partition next to your Windows partition), if you need a third party utility to boom the beginging of the partition in the Windows aprtition look, then you can extend the Windows partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Share the creation of the disk using VMWare

  Grid version: 11.2
  Guest operating system: Solaris 10
  SE host: Windows 7
  Virtualization software: VM Ware 8 workstation
  
  I want to install 11.2 IM on my laptop.
  
  I was under the impression that shared LUN for the installation of the grid can be created using Openfiler. But according to the document below, it is possible
  
  http://www.dannorris.com/wp-content/uploads/2008/04/2008_341_norris_ppr.PDF
  
  But Dan Norris said "+ VMWare Workstation has a limitation in the sharing of disk, it's one of the reasons we use VMWare Server (which has no such restriction). + »
  
  I don't know what version of VMWare Workstation speaks it. Is it possible to create shared LUNS using VM Ware workstation 8 (which I have)?

  You can create shared discs by editing the file manually .vmx (never tried on my good computer)

  or you can also use Virtualbox, which is free and supports the shared disks

• How to set an MTU of 1600 for test Lab at home for the NSX on Vmware workstation

  Hello.

  I'll set up a laboratory at home to build a laboratory to the NSX. I am running 3 on VMware Workstation 11 Esxi hosts. All three hosts of esxi run each 4 Ethernet adapters on them.

  To configure installation VXlan for my lab at home, I have modified the virtual machine's .vmx file and changed the vmxnet3 device and it works.

  Ethernet1. ConnectionType = "custom".

  Ethernet1.virtualDev = "e1000".

  Ethernet1.wakeOnPcktRcv = "FALSE".

  Ethernet1. AddressType = 'generated '.

  ethernet2. Present = 'TRUE '.

  ethernet2.VNET = "VMnet1.

  ethernet2. ConnectionType = "custom".

  ethernet2.virtualDev = "vmxnet3" - change to vmxnet3

  Adapter type VMxnet3 only is not supported for VMware workstation and also one of my hosts broke down several times with the low error message in the log file.

  2015-08 - 02T 13: 37:48.254 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.261 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-5 | I120: VMXNET3 hosted: Packet has no eop, 1 scanner, tx ring size 512, txd valid 0.

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.536 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:51.436 + 10:00 | VMX | I120: E1000: E1000 full rx ring, empty packages.

  2015-08 - 02T 13: 37:53.636 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows has changed: 1 make MKSWindow (s) total 2.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State poweredOff without reset, soft, softOptionTimeout: 20000000.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: Stopping VCPU son...

  2015-08 - 02T 13: 37:56.567 + 10:00 | SVGA | I120: Fate of thread SVGA

  2015-08 - 02T 13: 37:56.571 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 1.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: GDI-Backend: HWinMux stopped making the composition of the window.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 0.

  2015-08 - 02T 13: 37:56.575 + 10:00 | VMX | I120: Thread MKS is stopped

  Can someone guide me how to set up a lab NSX on VMware workstation and use 1600 MTU for VXlan traffic. Any help is very appreciated.

  Hi all

  I managed to solve this problem by separating the storage traffic to a different vswitch and the traffic to a different VDS NSX.

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 e1000 up to 1000Mbps Full 00 0000:02:01.00: 0C: d 29:a4:7: Intel Corporation 1500 6th 82545EM controller Gigabit Ethernet (copper)

  vmnic1 e1000 up to 1000Mbps Full 00 0000:02:04.00: 0C: 29:a4:7 d: 78 1500 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic2 e1000 up to 1000Mbps Full 00 0000:02:05.00: 0C: 29:a4:7 d: 82 1600 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic3 0000: 0b: 00.00 vmxnet3 Up Full 00 10000Mbps: 0C: 29:a4:7 d: 8 c 1600 vmxnet3 Inc. VMware Virtual Ethernet Controller.

  ~ # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  1536 5 128 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  The VM network 0 0 vmnic0

  0 1 vmnic0 VMkernel

  0 1 vmnic0 network management

  DVS name Num used Ports Ports Ports configured MTU rising

  dvSwitch 1536 10 512 1600 vmnic3 - for network traffic

  DVPort use customer ID

  7 1 vmnic3

  81 1 NSX 2 controller nsx_controller_4be65643-37ca-468e-b00a-f711d6cc5447.eth0---noeud

  79 1 nsx_controller_8bb60e33-b290-4252-92b1-501aa2f83607.eth0---noeud NSX Controller 3

  110 1 vmk2 - vtep interface for the host

  119 1 Linux1.eth0 - test Linux VM

  This laboratory works fine for me now and my Adviser for laboratory at home will be not to use the same network card for storage traffic that was used for the traffic of the NSX.

  Thank you for all your help.

• The upgrade from VMware Workstation 12: can I install above?

  So I just bought a license to upgrade to workstation 12. Now, I noticed that it is (finally) 64-bit native. However, 11 Workstation is native 32-bit. Can I just install VMware Workstation 12 top like I did the upgrade from 10 to 11? Because the 10 and 11 were native 32-bit.

  The question is moot.
  Upgrade has always meant uninstall the old version, install the new version.
  If you do it yourself, you have more control, but the results will be the same.

  The safest option is: uninstall manually - reboot - check registry for services that have not been removed - if necessary, repair registry - restarts again and then install the new version right after the restart.

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• How to completely hide the toolbar of vmware workstation 8.0

  Hi all

  I have Vmware workstation 8.0 running on my windows 7 PC and what really bothers me is the small toolbar up to the top. I tried to go to the exclusive display, but it does not work. I use two monitors on my PC but not on my virtual machine, thank you.

  Hello...

  what I see in the screenshot... It seems that u don't PIN the toolbar on the screen...
  So if you need to make it appear again try either hovering on it (it is sometimes so difficult if you have not installed the vmware tools) or exit full screen mode and try another option to display and the spindle of the tool bar in this...

  But impossible to totally remove this thin strip off the screen...

  For vmware tools... guest what operating system u use... ? ! ? !

• Unable to connect to the server of VMware Workstation

  I'm running ubuntu 13.04 (I know only is not officially supported at this time), however, when I navigate my browser to the virtual server (that I configured it using the port 10250), I get the following message is displayed:

  Access to the denied Web page

  Less

  You are not allowed access to the Web page at https://server:10250 /. You may need to connect.

  Error code: 403

  Status of it running:

  Andrew@server:~$ vmware - version

  VMware Workstation 9.0.2 build-1031769

  Andrew@server:~$ sudo service start vmware-workstation-server

  From Workstation Server: fact

  Andrew@server:~$ sudo netstat - apn | grep vmware

  TCP 0 0 0.0.0.0:10250 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 1703/vmware-authdla

  tcp6 0 0: 10250: * LISTEN 7878/vmware-pass

  UNIX 2 [ACC] STREAM LISTENING 37086 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  UNIX 2 [ACC] STREAM LISTENING 11814 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  UNIX 2 [ACC] STREAM LISTENING 42569 7878/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 [ACC] STREAM LISTENING 42580 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfc-fd

  UNIX 2 [ACC] STREAM LISTENING 42587 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfcssl-fd

  [of] UNIX 2 CONNECTED FLOW 37087 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  [of] UNIX 3 CONNECTED STREAM 35127 5534/vmware-tray

  [of] UNIX 3 CONNECTED STREAM 6047/vmware-unite-h 35819

  [of] UNIX 3 CONNECTED STREAM 43388 7878/vmware-pass

  [of] UNIX 3 CONNECTED STREAM 42564 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  I get this message, if I run it on the local host, or if I run it on another machine.

  It's the only thing I see in syslog:

  Cat/var/log/syslog | grep vmware

  June 13 to 17:04:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:37:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:54:56 Server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': no such file or directory.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Acquired the lock to/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: unlocked lock for/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13-20:13:42 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:48 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:55 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:02 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:06 server named [1418]: fix error (network unreachable) 'my.vmware.com.edgekey.net/A/IN': 2600:1401:2:42 #53

  13 June at 20:14:09 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd [2275]: last message repeated 2 times

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd Server [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:02 / usr/lib/vmware/bin/vmware-hostd [7008]: last message repeated 3 times

  13 June at 20:15:04 the server kernel: [3056.496451] vmware-gksu [7037]: Segfault at 7f353f7591aa ip 00007f3547c38156 sp 00007fff95cf93d8 error 4 to libc - 2.17.so [7f3547bb0000 + 1be000]

  13 June at 20:15:05 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:07 the server kernel: [3059.388927] vmware-gksu [7085 or]: segfault at 7fc4c9f331aa ip 00007fc4d253b156 sp 00007fff04d21118 error 4 to libc - 2.17.so [7fc4d24b3000 + 1be000]

  13 June at 20:15:09 the server kernel: [3060.572580] vmware-gksu [7130]: Segfault at 7f68319561aa ip 00007f6835e04156 sp 00007fff7ce94c98 error 4 to libc - 2.17.so [7f6835d7c000 + 1be000]

  13 June at 20:15:09 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:14 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:17 the server kernel: [3069.298603] vmware-gksu [7548]: Segfault at 7f4d5bdeb507 ip 00007f4d64350156 sp 00007fff78106918 error 4 to libc - 2.17.so [7f4d642c8000 + 1be000]

  So I was wondering if anyone else has similar problems, I thought maybe it was the port that he was running on, and chrome doesn't, unfortunately, I can't find a way to change the port (as running with root, does not this either).

  I was confused Workstation Server with WSX.