The upgrade from VMware Workstation 12: can I install above?

Similar Questions

• Can't access c$-the comments since the upgrade of VMware Workstation 7.0.1

  Hello

  Since I've upgraded to a trial version of VMware Workstation 7.0.1 I can't connect to a share on a virtual (WinXP SP3) computer. The host operating system is WinXP SP3. I get the error "error system 64. The specified network name is no longer available. »

  My virtual machines have been created with Workstation 5.5.8 with which he had no problems with access to actions on the virtual machines.

  I can ping the virtual machine from the outside and I can access shares from inside the virtual machine on other machines (physical).

  It is therefore no problem of connectivity.

  I disabled all firewall (host and VM) without success.

  The only thing I did was to upgrade to 7.0.1 5.5.8. A modified in any configuration.

  How can I do my actions work with 7.0.1?

  MFG

  Mr. Metzger

  Perhaps this article applies to you?

  The guest virtual computers lose connectivity to the Windows host after upgrade to Workstation 7

  http://KB.VMware.com/kb/1015940

• The upgrade of VmWare Workstation 5.5 to 8

  I have an installation of Workstation 5.5, which has been used for a while.  It contains several virtual machines, some with more than a dozen shots.  It has worked well for me.  I'm currently upgrading my computer and I would like to upgrade to Workstation 8.0, but upgrade to experience, I know that I will have problems with the upgrade virtual computers that are instant.  Is it possible to upgrade the virtual machine without having to delete all snapshots and return the VM?

  Hello

  I think that you can run the virtual machine as they are - if this isn't against all my expectations, I fix any problems ;-)

• Move the VM from VMWare workstation 7.1 for ESX 4

  I have a virtual machine created in VMWare workstation 7.1 (Machine virtual Version 7) and have copied to the data store on a host ESX 4 Update 1

  I don't know why I still need to re - import the virtual machine with vmkfstools-i source/destination before it will boot as ESX 4U1...

  Can someone shed some light on this?

  Hello

  Have you tried using the Workstation 7 export feature?

  By using this feature, you can create a consistent ESX VM or a virtual appliance which you would then be able to reload on your ESX.

  In VMware Workstation, click file-> import / export

  For the Source, you must select the Type of source: 'others '.

  then, you look up your VM's vmx file.

  Once in the destination Type, select VM Infrastructure VMware or Virtual appliance.

  If you select VMware Infrastructure, it will ask you your server address VCenter or ESX + credentials and it will load it automatically.

  If you select Virtual appliance, you will be able to create an OVA or file OVF that you can use to create a new virtual machine based on this device in VClient.

• After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

  I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

  I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

  I am at a loss.

  This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

  You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

• VMware Workstation 11 crashes after installing VMware tools

  As the title suggests, VMware Workstation 11 crashes after installing VMware Tools with a guest Windows 7 x 64. I am running VMware on a host Windows 7 x 64. It happens every time I try to install the guest operating system. Attached to this post are all the newspapers that I could find that I thought would help solve the problem.

  
  

  Thank you

  Wila

  Hello again,

  Maybe the following post helps (where you installed Visual Studio)

  How to troubleshoot Workstation (vmui) - Access Violation Crash? How to troubleshoot Workstation Crash (vmui) - Access Violation? How to troubleshoot Workstation Crash (vmui) - Access Violation?

  --

  Wil

  As you may already know, VMware has just released a major update for 11 workstation (including VMware tools updated). Workstation now works almost perfectly. I don't have accidents since then. This means that I have was right in my post above. This is indeed nothing more than a BETA version of VMware buggy, lazy, masked as a "final". Wow, it looks like that a respectable company like this would not resort to such unethical practices. I mean that you would expect this kind of crap of a company like Electronic Arts, but VMware? Come on guys, you're better than this!

• Internal error of the View Composer. Contact your administrator. After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  Hello.

  Some panic here.

  After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  I get internal error View Composer. Contact your administrator.

  Help, please.

  Best regards

  Peter

  Hmm

  Apparently available allow was to be done by right-clicking in the pool and enable provisioning on the Provisioning... tab. Not on the status button in the overview of Ddesktop pools.

  Dang.

  Best regards

  Peter

• Can upgrade us VMWare workstation 7 to v8

  Is there a way to upgrade to VmWare workstation 7 to v8 without disturbing currently installed VMs.

  I tried to install VMWare 8 directly on VMWare 7 and looked at the upgrade option. But it asked me to uninstall the current version first, then reinstall.

  Pls help. Thanks in advance.

  The previous version must be uninstalled in order to install the next version, however it does remove all Virtual Machines.  Although once the new version is installed, will need to be upgraded on each virtual machine VMware Tools.

• How can I talk to a HUMAN being on the upgrade from Design Standard CS6

  How can I talk to a HUMAN being on the upgrade from Design Standard CS6?

  See my response to your other thread and provide more information. Adobe does not propose to hold your hand, especially on weekends, but you can always try to chat with one of the guys Indian support via the support pages...

  Mylenium

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• How to solve the problem of VMWare Workstation 8 - unable to open/dev/vmmon

  Initially, I had this problem in March 2011 after installing VMWare Workstation 7 on a lab machine 5.7 RHEL and attempt to boot an image I know was good and should work. .  Someone else fixed the problem for me - I think they had to install a new/different libraries (vmmon.o and vmnet.o for vmware).  However, I find no information detailing what has been done to solve the problem.

  I see the same error on the same machine after upgrading to VMWare Workstation 7.0 for VMWare Workstation 8.0.

  1 here are the mistakes I see:

  a. "Could not open/dev/vmmon.

  b. "failed to initialize the surveillance apparatus.
  c. "cannot change the power state of VM: cannot find a valid peers to connect to.

  Also, when I run the stop etc/init.d/vmware, then run /etc/init.d/vmware start, I see that the State of "Virtual Machine Monitor" is DOWN.

  
  2 here is the information on VMWare Workstation:

  VMWare Workstation 8.0.1 build 528992

  3 here is the RHEL uname - information for the host:

  2.6.18 - 274.7.1.el5xen Linux #1 SMP xxx.xxx.xxx kills Oct 17 12:06:22 EDT 2011 x86_64 x86_64 GNU/Linux
  Release of RedHat Enterprise Linux Server 5.7 (Tikanga)

  The problem could be that the version of vmmon.o and vmnet.o that comes by default with vmware does not work with linux kernel version I have on my system.  I think I need to build a new vmmon.o and vmnet.o on my particular 5.7 RHEL.

  I found that to build a new version of vmmon.o you Executive vmware - config.pl.  I have not just on my machine, and I was not able to find on the internet.

  Here is the version of vmmon.o (for RHEL 5) that I have installed on my machine:
  /usr/lib/VMware/modules/binary/BLD-2.6.18-8.EL5-x86_64smp-RHEL5/objects/vmmon.o

  Here is the version of rhel5 I use:
  2.6.18 - 274.12.1.el5xen
  It is possible that the vmmon.o using bld - 2.6.18 - 8.el5 - x86_64smp-RHEL5 is not compatible with the kernel 2.6.18 - I 274.12.1.el5xen.

  Please help me find vmware - config.pl so I can build my own vmmon.o and vmnet.o

  do not use a kernel XEN enabled when you install Workstation

• OfficeJet HO 5742: I have HP Officejet 5742 and since the upgrade to Windows 10 I can't scan.

  Since the upgrade to Windows 10 I can't scan. The printer indicates this computer not connected, but I can always copy and print.

  Thank you rb011. I used the print and scan doctor and he pointed me in the right direction. The solution is to uninstall the printer and reinstall the drivers updated from the HP website. Everything is ok now. Thanks again.

• Problems with the upgrade from Windows Vista to Windows 7 error

  I try to upgrade Vista Business 32-bit Windows 7 Home Premium, but I get an error at the beginning of the installation message saying "Windows could not retrieve information about the disks on this computer.  After clicking on the close button, its takes me back to the opening screen.   Its a laptop with 3 GB of RAM.  The program compatibility tells that should work, can anyone help?

  Are you trying to upgrade Vista while it is running or are you boot from the Windows 7 DVD? Note: Windows 7 Home Premium requires an installation "Custom"and clean up as there is no path inplace upgrade (see below).»

  Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements
  1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  16 GB of disk space available (32-bit) or 20 GB (64-bit)
  (Note: 16 GB is a strict minimum and unrealistic, suggests at least 32 GB or more)
  Graphical device DirectX 9 with WDDM 1.0 or higher driver

  Windows 7 upgrade paths
  Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

  .

  Windows 7 upgrade paths
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Decrypt Windows 7 upgrades: the official rankings
  http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
  (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

  Which is right for you?
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  List feature that provides each edition of Windows 7:
  http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

  Windows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
  http://www.PAGESTART.com/windows7proupgade.html

  Users of Vista Home Basic, your choice of upgrade is: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
  Users of Vista Home Premium, is your choice of upgrade: Windows 7 Home Premium or Ultimate 7

  Users of Vista Business, your choice of upgrade is: Windows 7 Professional, Ultimate or Enterprise
  

  Users of Vista Enterprise: only one way of upgrading that is: Windows 7 Enterprise
  Vista Ultimate users: once again as a way of upgrading that is: Windows 7 Ultimate.

  J W Stuart: http://www.pagestart.com

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• The upgrade from Photoshop Elements 10-15?

  Hello.

  Is it possible to upgrade Photoshop Elements 10 directly to 15, No 11-14 versions?

  Thanks, Jenny

  Yes, you can get the upgrade from any previous version.

  See what's new:

  99jon tech: Adobe Announces Photoshop Elements 15