InDesign CS2 installation without a CD-ROM drive.

Similar Questions

• What is the procedure for removal and installation from a CD ROM Drive?

  I have a Compaq Presario 8000Z / 8QSXE1 PC. I just ordered a new CD ROM drive and expect to receive at the start of next week. I already know how to open my case, I just bought the antistatic carpet from Radio Shack with the hand strap to dissipate any static buildup on me and the PC. I got compressed air ready to clean any dust and the debri.

  But now if someone knows how to remove the old drive and install the new drive I as always greatly appreciate this info. What tools do I need etc will also be useful for this task.

  Thank you

  drake68

  Hi Drake,

  Review these "how-to" HP articles.  To remove and replace process should take less than 30 minutes.

• How to install my CD acrobat on my new computer without a CD-ROM drive?

  I have a new computer for my work. However, my Acrobat 9 pro is a CD and my new computer is not a CD-ROM drive. How to install this?

  Hi mikeb36295357,

  You can download the Acrobat 9 Pro form this link products download Acrobat | 9: 8.

  Kind regards
  Nicos

• My drive InDesign CS2 installation failed.

  What part 'validation' of beginning an error message tells me to contact the manufacturer of the software. I am here. It seems that it is as close to assistance, we can get. SOMEONE CAN ME SAY HOW DO I GET HELP? Thank you kindly

  CS2 activation servers have been closed several years ago. See Adobe - CS2 downloads

• Windows 8 new computer without a CD Rom drive, CS5 Extended student and teacher download and install it

  I have a new laptop with Windows 8, and like most new computers, he has not a reader of CD-ROM I disabled CS5 Extended Student and Teacher Edition of my old computer (since I'm permitted in a computer at a time) and here install and activate on my new machine. I am in possession of the original cd, product key and serial number, but the email I used initially to get the serial number no longer exists. I created a new Adobe ID with my new email address.

  I read a forum that suggested that I have download a trial version and then activate this test with my serial number. I followed these steps with the version closest to you, that I could find, which was of CS5, and although my computer says that the files downloaded, nothing was installed... and I can't understand how to install... and I'm afraid that I don't have the same version in the trial that the CD I own. Any advice would be greatly appreciated-plus of the reason why I wanted that a faster computer was so I could run my photoshop out there!

  Direct download links for Adobe software

  Otherwise, feel free to transfer your installers on DVD on a USB key or what is at hand.

  Mylenium

• Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  I didn't come across this link, so I tried to copy the desktop flash player and installed it from there. Thank you, in any case.

  Sent from my Verizon Wireless 4 G LTE smartphone

• Portege R100: Solution how to restore unity without resorting to a CD-ROM drive

  I have just re-registered my Toshiba R100 after almost 3 years of owning without a single format due to the complexity of get a bootable CD-ROM drive to work.

  That won't help those of you who have a computer laptop not boot, but if yours is booting I have used the following method for re - store my laptop with zero problems.

  1. put the CD in another computer and extract the Ghost image restore files '01131000.GHO' and '01131000.CRC' of disc 1 and "01131001.GHS" of disc 2.

  2. If your laptop has a second partition and then transfer these files to a directory on your windows not partition. If this isn't the case, you will need to use partition magic to create a.

  3. create a Norton Ghost of a commercial version of Norton ghost boot disk and a Windows 98 Startup disk.

  4 start the laptop the Windows 98 disk, then swap disks and run Ghost.

  5 Select Local > Local disk > image
  And select the 01131000.GHO file.

  6 select the image you just proposed, and then select the R100? s drive and finally select the main boot partition.

  7. click on go!

  8 re-boot and follow the windows configuration and you're done.

  Hi George.

  Thanks for your useful description.
  I don't know that it will help other users here in our community.

• Emulate a CD-ROM drive for the actual installation on the HARD disk

  How is used to emulate a CD-ROM drive, to mount a Win7 ISO, VMware Player installation

  and do an actual facility in one of my partitions of HARD drive?

  The ISO is already defined with an Autounattend.xml file.

  for other things like VMware Player trying to make are not necessary.

  This should be simple enough, but do not see the options for this.

  And the search of this forum has not helped.

  Thank you

  How is used to emulate a CD-ROM drive, to mount a Win7 ISO, VMware Player installation

  Read page 77, 78 configuration DVD, CD-ROM and readers of diskette to see how to connect an ISO Image.

  The ISO is already defined with an Autounattend.xml file.

  for other things like VMware Player trying to make are not necessary.

  Read page 24, 25 manual installation of a guest operating system.

  and do an actual facility in one of my partitions of HARD drive?

  This should be simple enough, but do not see the options for this.

  Read the Documentation!

  If I understand you correctly and you want to install a physical disk partition and not a virtual hard drive, then after initially creating the VM void then the change settings by deleting the existing virtual hard drive and add a hard drive by selecting "Use a disk (for advanced users)", which BTW I don't consider you one since to couldn't understand it yourself.  That said, what's not in the documentation is that if your host operating system is Windows 7 and Windows 8, you won't be able to use a physical partition that is located on the same drive, the host operating system is probably installed.  It must be one disk/partition physical separate other then what Windows 7 is installed on.  (That's assuming you are starting Windows 7/8).

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• need to repair the startup of windows, files, but cannot use the cd-rom drive

  for the past 6 months that I had to use a return to the top of the boot disk to get windows to load so I could copy all my important files and documents on DVDs as my windows xp edition home sp3 OS suddenly stopped wanting to load normally and I'd just reformat the HD

  Last week... my browser froze causing me to have to stop by turning off the power button... to restarting my pc, my cd-rom drive is not found and now I am unable to finish to copy my important files and these DVD

  is there anyway I can repair windows without using the cd-rom drive... .. I can get in the F12 boot menu but not in the installer of F2 or F8 safe mode without using a cd-rom drive to launch the boot disk

  2.2 under Win XP home edition sp3 dell xps 210 system, intel duo core processor 4 GB ram and 500 GB HD

  It has only 1 CD/dvd-rom combo drive and 4 smaller slots for memory cards and other... I have 3 slots open usb but do not have the files of windows to a flash drive recovery

  would it be possible to make a recovery file or file on a USB stick the size of a flash drive and boot would need... currently the largest one I have is 4 GB

  Hi storm36,

  You must have the Windows XP disk to repair Windows. As the CD/DVD drive is not getting detected, we recommend you try the following steps and check the result.

  Step 1: Check if the device is detected in the BIOS (basic input/output device)
  a. start your computer and press on delete key continuously to see the BIOS.
  b. check if the CD/DVD device is detected.
  c. If this isn't the case, then unplug the unit and he reconnected inside the CPU/Tower.
  d. check the result.

  Step 2: If the device is detected in the BIOS, try the following steps:
  a. start your computer and boot to the desktop.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. select my computer, click the Action menu and click scan for hardware changes.
  d. check if the CD/DVD device is listed in the list.

  Step 3: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .
  b. Once you have restored the computer, check if the CD/DVD drive is visible.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD ROM drive not in Device Manager

  Suddenly, my CD-ROM drive doesn't work after I plugged a flash drive. It does not recognize a disc (tells me to insert a disc after that I already have). The drive is not listed in Device Manager. I followed the instructions of regedit and led nothing to delete the location. I tried the following without success website: http://support.microsoft.com/mats/hardware_device_problems/ The Fix - It ran and gave me: material changes may not be detected - checked. Y at - it sort of screwup driver or is my cd rom bread?

  Hello

  If the drive is viable that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and

  
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Need the number of the part to the CD ROM drive

  I have a Compaq Presario 8000Z AMD Athlon XP 1.47 GH processor PC running with Windows XP Home Edition System. I have a model of CD X 48 CRD - 8484B I want to know the part number of this player. If anyone has this info I'll appreciate a response.

  Thank you

  drake68

  Well, I discovered the part without opening my case number. I just typed in my PC model in the search box on the HP Web site and it shows my entire model number, I selected to order parts for this model and it shows all the parts for my PC and the P/Ns for each part. My CD ROM Drive n/P is 214755-001. I went on this site nevegg but could not find my drive but I have another place that wearing this player went forward and special ordered. They sell second-hand released nine disks as well as brand new. I ordered a new which cost $69 with the Fed Ex is $77 total for shipping. So I should get this new album some time in early next week. The name of the store that I bought it from is called Cygnus Supply LLC, their website is cygnussupply.com and their phone number is 866-884-0288 if anyone is interested. Now I'll start a new thread to see if anyone can give me information on the removal of the old procedure of disk procedure and installation on the new drive. OK thanks for your help.

  Thank you

  drake68

• Re: Which CD-ROM/DVD-ROM drive will fit in my Toshiba protégé M700 Tablet

  My Toshiba protégé M700 Tablet came without a CD/DVD-Rom drive. What brand/model will fit in this machine and where is the best (and cheapest) place to the source of this element.

  Best regards

  Don

  Hello

  I found some info that Portege M700 comes with drive of DVD Super-Multi Panasonic UJ-852STJ-Z.
  I wonder your one comes without optical drive.
  Another device is placed instead of ODD?

• Slim SelectBay DVD - ROM drive

  I recently bought a second hand Satellite Pro, but it seems to be without a DVD player and has only a weight saving plastic 'trick' in the Slim Selectbay.
  I know that my laptop is now discontinued, but it is anyway to acquire a Slim SelectBay DVD - ROM drive, because they are not for sale in the "Accessories" section.

  Hi Mikey

  In my opinion, you should contact partner in your country. They can order each hardware component or any part of the accessories for each model of laptop computer independent of how old the model has.

• TECHNICIAN WENT, BUT DID NOT CONNECT THE HP LOGO AND THE CD ROM (DRIVE).

  Dear Sir, a technician went to know the C.Sharma that does nothing to solve the problem of bluetooth

  and my Windows 8, 64-bit laptop heats than noraml. He opened the laptop brushed the fan

  area and the left HP light up sign logo and Unplugged CD ROM drive. Again, the complaint of the raised times is

  closed without solving and this continues for the last 10 weeks or more. You are requested to

  ensure adequate to the problems suffered by me but quick repairs.

  Hello

  The best of the people who can help you is HP Tech call back and let them know and rule on the dispute over the priority...