Re: Which CD-ROM/DVD-ROM drive will fit in my Toshiba protégé M700 Tablet

Similar Questions

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Satellite 1110-Z12: CD-Rom drive will not play copy controlled CD

  Hello

  The CD-Rom drive in my Toshiba Satellite 1110-Z12 (bought 01/2003 in Holland) becomes completely unreadable when I insert a CD protected by "Controlled copy" (IFPI). And I mean, berserk, he upped power at an incredible speed of spinning - very strong - and afraid he will break down.

  These are mainly EMI productions such as:
  -Norah Jones: Feels Like Home
  -Joss Stone: The soul Sessions.

  I know that these copy protection systems can never break or damage the use on CD players (standalone or computer).

  How can this be repaired? I never found the firmware update for the CD player on the Toshiba site.

  As much as I m did know, is it possible that the General of music that are "Controlled copy" by IFPI do not work in the drive of your laptop.

• Satellite A210-12U - DVD RW drive will recognize the DVD but no CD

  I have a laptop Toshiba Satellite of 4 years (model: A210-12U) that I recently restored using the recovery CD - it running Vista SP2.

  Please bear with me as this may be an ish story, but it helps to explain my problem.
  Around a year ago, a virus has made its way onto my laptop and almost destroyed the BONE - I consider myself to be fairly knowledgeable software-wise after studying at the College and began the long process of trying to resolve my laptop without using the recovery CD.

  It was a patch job, but after a month or two, I had it works again and it was fine for a period of a few months or so, before, I noticed that my DVD RW drive would no longer read or burn CDs. I spent hours trawling internet forums to help without a bit of luck and was eventually convinced that it was a hardware problem.

  As I needed to use a CD burner, my cousin gave me his DVD - RW USB drive and it did not work, which means that the logic suggested that it wasn't a physical problem with the drive, rather that it was most likely a problem with the registry/OS. It was not surprising given that I had done a basic work patch following the infection by the virus a few months earlier.

  After becoming more and more frustrated with my laptop in general, I backed up my data on a portable hard drive and used the recovery CD that came with my laptop. The laptop started the CD when he was outside of the OS (according to the instructions that came with it) and restored all of the computer to its original state (and solve many of the problems that have been caused by the virus in the process).

  I have spent the last week re - install programs, the copy of backdata etc. and was trying to install a software on a CD today, when I noticed that the laptop had difficulties to access the disk. Explorer Windows knows that the drive is there; It is listed in 'My Computer' and will also be the small CD icon alongside the pointer when it tries to load the CD - suggesting that he knows that there is a CD in there.

  However, the drive will still read DVD that suggests, it could be a physical problem with the drive itself (I read somewhere on the laser need to change its angle accordingly during playback of CDs and DVDs). I have a question though, what the computer was able to read the recovery CD when I was being a complete restoration (and that she felt the same difficulties of CD playback in Windows before restoration).

  I tried all the suggested methods in similar posts on this forum - Microsoft Fix It, uninstall the drivers etc nothing helps... So yes, I am a little confused and wonder if anyone can help?

  The DVD RW drive is listed in Device Manager as HL-DT-ST DVDRAM GSA-T20N ATA Device.

  Thank you
  Ben

  Hi Ben

  In my opinion, this is material junk. You're right about the position of the objective. It needs to be calibrated for CDs and DVDs. If the optical disc drive cannot read one of these media in general, it can be problem of lens calibration.

  To be honest sides for this old A210 are cheap and more. I advise you to buy a new or used one on eBay. Exchange and test functionality.
  To be honest I don't believe there is a trick that can help you get it working again.

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• What DVD - Ram drive will work in Satellite M30-642

  Hello

  hope someone can help me.
  As my carpet * a drives DVD is out of order, I want to buy a new. So I search the www for some. But I don't know if the disks I found work in my M30 (I need a bootable DVD drive). These are the discs that I found:
  -Plextor PX-608AL
  -NEC AD - 7543 HAS
  -NEC AD - 7540 HAS
  -NEC ND-7750GEN
  -Samsung SN-S082D
  -Panasonic UJ-846

  Hope, anyone know if one of these drives will not work in my M30. If not is there any other player?

  Thanks for your help.

  Greetings
  OLAF

  Post edited by: Ollek

  Unfortunately, the M30 road parameters are unknown for me. I want to say I put t know if the drive supports a master, slave, or c - salt settings but I've studied a bit on the net and found many compatible players!

  -Matu * a G8CC0001C210
  -Matsu * a G8CC00019210
  -TEAC G8CC00013210
  -Toshiba SD-R6112
  -TEAC G8CC00013210

  Here is a strange number, but it seems that these are the numbers of in-house production. Who knows?  :|

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• DVD / CD-Rom drive will not read disks.

  I don't know if it's a hardware problem or a software problem.

  When I put a disc in, it runs for 1-2 seconds, stops, turns for 1-2 seconds, stops, turns for like 1-2 seconds, stops (model repeats 3 times at once) and then silence.

  After trying several times to put in and taking the disc, it runs at full speed and I knew that it is a success that it's reading the disc to replay the video. But why it fails then back working again constantly. Solution?

  Also, when my computer is in "sleep" and I wake up, disk she could read his way 'sleep' cannot be detected anymore. Solution?

  The drive model is HP DVD Ram UJ8A2.

  I tried all the solutions software. None of them worked. I have actually used a piece of tissue paper to gently clean the DVD / CD lens a few times and now it works fine. I think the lens must attend a gentle cleaning. Resolved issues.

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD/BluRay drive will appear under unknown device

  The driver seems if be installed properly, yet it shows in the 'Unknown' category in Device Manager.  I can burn discs and play discs if I run the program as administrator, but it says that "access is denied." if I try to use the drive without specifying a run as administrator.  Screenshots can be provided if it would be of any help.

  Hi WarrenTC3,

  1 when was the last time it was working fine?

  If Device Manager cannot identify the device, it will label it an unknown device.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it.

  First, check what is the code for error on an unknown device in Device Manager.

  (a) open the Device Manager , look for the unknown device.

  (b) make a right click on the device and click on Properties, search now on the tab general to find the error code.

  See the link below and run the patch available and check if this solves the problem.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the previous step fails, and then run the fix tool below and check out them.

  If the below fix tool does not resolve the issue then you must try the steps manual, mentioned in the following Microsoft article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• receiving error code 39 for dvd, driver will not load.

  replace corrupt cdrom.sys

  small management business of vista 32 bit.  receive error code 39 for dvd.  driver will not load.  I tried to uninstall.  same question on re - start.

  I tried regedit suggestions.  UpperFilter deleted, no lower filter exists.

  In addition to the above on the excellent advice, cdrom.sys is not corrupt.

• My DVDRW DRIVE will not write to disk

  My DVD - RW drive will not write to disk, it is only recognized on my computer as a DVD ROM and CD - ROM only. I looked in Device Manager and there is no question mark by it and he says it's working properly, I had it works normally about 2 weeks ago, can you help me? L.M.Baggley

  If it worked about two weeks ago, you could try a restore point to return the parameters of your system they had previously, by using the system restore. It is in the startmenu, all programs, system, SYSTEM RESTORE tools. Choose a point of older and not the most recent. Alternatively, right - click the icon for your drive and make sure that the recording tab is there, and that registration is enabled on the computer. You will also find it better if you record at a slower speed and not the faster if you want to avoid reading errors. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• PowerDVD dx says no disc in the dvd rw drive even if the drive is present

  Cannot use dvd rw drive will not play movies on dvd or CD

  Have you tried using a cleaning kit to clean the optical drive?  Lasers get dirty and cannot read the disc.

  Open the Device Manager and try to update the drivers for DVD

  Right-click on my computer and select Manage

  Select Device Manager

  Click + next to CD-ROM/DVD-Rom readers

  Right click on the menu item drop-down and select put to update driver

  Close Device Manager

  Try again DVD

  If the update does not work, right-click on the drive and select uninstall

  Close the Device Manager and restart the computer

  Try this fixit

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  ..... Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Good luck.

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.