InDesign fails to operate correctly on some files. Flashing user interface and deselecting objects.

Similar Questions

• Some files Flash appears not

  For the last two days, some Flash files did not their appearance, while others have.
  
  More information:
  
  I use Mac OS 10.3.9 processor G3, Flash Player 8 and Safari.
  
  
  Reinstall the drive does not work.
  
  
  I had this problem before. He went finally last time, but it would be nice not having to wait a week or two.
  
  
  When I scroll on a page with a space where Flash content should be, it still shows the effect of "lag" weird that happens also with QuickTime movies.
  
  
  This site works.
  
  
  This site does not work.
  
  
  This site originally worked, but now it has also stopped working.
  
  
  Animation test suggested in the FAQ of support does not work.
  
  
  Right-clicking on an area where there should be Flash content (but isn't) displays a Flash menu.
  
  
  I hope that there is some kind of solution for this. Thank you.

  I found a way to solve the problem, but it's a bit of a hack. When you're on a page with a Flash file not working, go to the 'User Agent' of the Debug menu submenu and choose any agent user addition "Automatically chosen" (I suggest "Windows MSIE 6.0" ").

  If you do not have the Debug menu, you can activate it. First of all, quit Safari. Then, open the Terminal and type the following (without the quotation marks): "defaults write com.apple.Safari IncludeDebugMenu 1. Safari open again and it should be there.

• Cannot open the file resource user interface

  Hi all

  I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).

  I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.

  In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...

  
  

• DOM-Cross Site Scripting Vulnerability (http-client-side-xss) cased by a SharePoint 2010 file: MS. USER INTERFACE. Pub.Ribbon.js

  Hello

  We have implemented a portal that is connected to the Internet by using SharePoint 2010. We used a vulnerability scanner, called Rapid7 (https://www.rapid7.com).

  He noted that the portal is vulnerable to the based on DOM cross-site-scripting (XSS). The affected file is a SharePoint integrated in the Layouts folder: MS. USER INTERFACE. Pub.Ribbon.js

  The detailed message is as below:

  / _layouts/SP. USER INTERFACE. Pub.Ribbon.js line 94: exit dangerous customer call showUnapprovedXmlHttp.send () with the concatenation of 94:String argLine contaminated with the concatenation of 94:String valueLine controlled by the user with the concatenation of 94:String valueLine controlled by the user with the concatenation of 94:String valueLine of controlled use with the concatenation of 94:String controlled by the user valueLine with 94:Result valueLine controlled by the user of taint where are stored the calling function on ordered valueLine 94 : "document. URL.split... "... Split toLowerCase ' is controlled by the user

  References:

  Source	Reference
  CERT	CA-2000-02
  OWASP-2010	A2
  OWASP-2013	A3
  URL	http://en.Wikipedia.org/wiki/Cross_site_scripting
  URL	http://www.webappsec.org/projects/articles/071105.shtml

  Please advise on how to solve the problem of Security reported.

  Thank you

  Randy

  Hello Randy,

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the MSDN forums.

  I would recommend posting your query in the MSDN Forums.
   
  MSDN forum
  http://social.msdn.Microsoft.com/forums/SharePoint/en-us/home?Forum=sharepointgeneralprevious

  Thank you

• some files are only his and no video when played on the video 100% size when it is full screen, 200%, or 50%, it works very well... How can I solve this? He was fine a few days ago... :/

  title...

  Hi ksldfj,
  Here is a link to additional resource:
  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions
  hope this helps,
  Eddie B.

• Some files have been moved and are inaccessible after installation of Vista Service Pack 2

  For several months, I had been unable to install the latest updates of iTunes, always get the message "Could not access network location %AppData%". Recently, I realized that I had apparently never installed Windows Vista Service Pack 1 or 2 and the practice which finally allowed me to install iTunes 9.2.

  The problem I have now is that one (or two) of these Service Packs created a new profile user labelled 'TEMP' folder and that's where all my iPod apps seem to have "evaporated" to. I say evaporated because iTunes cannot locate, and when I access the folder of the user 'TEMP' (even using my administrator account), I found only a few subfolders (AppData (, LocalLow, Microsoft, CryptnetUrlCache), and those are all empty.  Either way, my administrator user account no longer shows upward at all when I use my 'normal' user code

  Making windows for .ipa files search is the only way I can see same registrants, but then when I try to open the location of file (Mobile Applications C:Users\TEMP\Music\iTunes) I get an error "the location is not available", which suggests that the information may have been moved to another location.

  I am running Windows Vista Home Premium 32-bit, Service Pack 2.

  Support Microsoft offers FREE for Vista SP2 issues support at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to insert a few lines of the user interface and some of the system during the click on the Add button

  Hi Experts ADF,

  I have an Add button and a table.

  My requirement is when the user clicks the Add button then the table below should show a new line. And some of the values I'm inserting into the method doDML with operation == DML_INSERT.

  I tried the steps below: -.

  (a) the primary key attribute is based on an expression groovy (with a sequence).

  (b) Add button is linked to the operation of CreateInsert.

  doDML c method) @Overridden in EOImpl, java. And some of the values I'm inserting into the method doDML with operation == DML_INSERT.

  (d) when I click Save I get error. So please let me know if any changes I need to do.

  Thank you

  Animesh

  Or if you want to insert data on the operation of createInsert then simply replace the create method in EOImpl

  Ashish

• Some program flashes automatically opens and closes immediately

  This program flashes - opens and closes automatically every three to five minutes which is really annoying:

  http://img132.imageshack.us/img132/164/flashlb.jpg
  Please note that Im not trying to open any program, it opens at random every few minutes.
  What is this program?
  How can I disable this opening automathic?
  Thank you

  At either the analysis of the find anything bad?

  1. As a test, if you start in safe mode with network, it continues to blink then?
  2. If you boot into normal windows and sitting mode to your desktop (IDLE - running nothing) is still flash upward?
  3. If it isn't, then open IE and let it run only on your home page - it flashes up then?
  4. If it sounds like a browser hijacking might be. Have a read through this - http://www.microsoft.com/en-gb/security/pc-security/browser-hijacking.aspx and see if it helps. NOTE: DO NOT worry about step 2 (MSE) IF you already have a bunch of AV updated running on your PC.

  
  

  Who will stop him?
  

  
  

• Some problems of user interface

  Hello
  
  With the help of obiee 11g, I have a static text box where I show the rapid values.
  I have 2 guests, appears in the report that I use to give space. So perfectly showing in the report.
  but the problem is the time of export.
  When exporting I think its HTML part not seen up to now its display 2 invites without space.
  
  Also, if I have a prompt command with & value as so in the report display & amp;
  But to export its seeding perfectly.
  
  I would like to know how to solve problems.
  
  Thank you

  Try to use the narrative view here... and also to give the screenshots for help. Will be easy to understand

• Update Briefcase error message ' locate some files in the Briefcase have sync copies inaccessible. " Convenience stores are unable to find problems.

  Bugs in the Briefcase: 'sync Briefcase copy junior '.

  Laptop with Wndows 7 family Premium and Windows 7 Professional of office have full connectivity that I can see - network directory shows homegroup with Briefcase on the desktop; file sharing fully implemented. Update everything completely fails: error updating Briefcase ' locate some files in the Briefcase have sync inaccessible copies.» Convenience stores are unable to find problems. Rules for creating portfolio followed by help for towel.

  Hello

  I suggest you to see the link and check if this is useful:

  How to use the Briefcase feature

  http://support.Microsoft.com/kb/307885

  (Valid for Windows7)

  I hope this helps.

• Trying to access the files on an external drive. It is denied. Some files are accessable. / problem solved. But please help me learn.

  Hello.

  I use XP Home 32-bit Edition. My a-external hard drive is a Western Digital My Book Essential 1.5 Tb USB2 HARD drive: model number: WDBAAF0015HBK-00.

  I can't access all files on the external hard drive. Currently, I mounted it on a folder. I have some files tif on the external hard drive and wanted to access my photos.

  The message that I had to right click and select open with was "access to C:\(Folder tree) denied." I tried my programs and the Windows Picture and Fax Viewer of image editing. Nothing works.

  When I right click on the images of problem the only options I have are: open, print, edit, Preview, open with, send to. None of these work.

  Some files are not accessible, and others. Unaccessable files do not have a preview image in the window pane (on the lower left side when I'm in the folder).

  This can happen if I didn't 'delete safetly' external hard drive or there was a Brown out? Some of the tif are too long file extensions? Shouldn't windows warn me too long file extensions?

  I consulted the havn't the reader for a while.

  I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files. When I click on a file, and then click file - properties: nothing shows up and he says: size: 0 bytes, size on disk: 0 bytes. But when I click on the file in the folder, it says that it is 23.3 MB. I can move the folder on my desktop.

  When I select all the files and click on file - properties: it is said attributes: read-only and hidden. They are green in box, I have not did those and it does not work. I clicked on Advanced Options, again I had unstapled the ReadOnly and hidden, then I unchecked all 4 options because they were greenboxed too. It's green boxes, not the check marks in both situations. What are the green boxes?

  ______________________________________________________

  Fixed a problem. I dragged and deposited the files on my desktop and I can access it. At this point, I just thought, since I had problems with the music files (mp3 or wav) is too long and is not be able to access or remove them, but I can delete the folders to get rid of them.

  So my question is why am I unable to access the files? This is a limitation of my external hard drive? Can I test or repair? What is this kind of disk with this version of Windows? What is a format? It's NTFS. Computer management indicates that the external drive is healthy.

  It seems that some files are not named as long as others and I could access those. Is there a limit on character/attribution of Tif or all types of files? If so, is it the same? Pourrait - linked to the way in which the external (or internal drive?) is setup in the policies tab? Are each disk different? They seem to be a little more limited than the internal hard drives, but I'm not sure if this is a limitation of the usb2.

  Does anyone know if there is a program or a way to know how many letters or numbers have been used? Microsoft Word and Works a number of words, but Works 9 (I have that) doesn't have a number of letter.

  Contradict you yourself.  At one point, you said:

  > I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files.
  and then you say:
  > A problem fixed. I dragged and deposited the files on my desktop and I can access it.

  This side, the general approach to access in this case is "Ownership" of these files.
  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  This probably occurred because the files were created on different computers by users with different Secure ID (SID) or you have reinstalled Windows and files were protected to some extent.  Since you are using XP Home Edition, the only way to see the security settings is to start your computer using safe mode and log in as an administrator.  This will give you access to the 'Security' tab when you right-click on a file and select 'Properties' (as described in the article above).  Apart from connecting with Safe Mode, you can use 'Cacls' command from a command prompt window (start-> Run-> "cmd") to view or change permissions on files

  "Cacls": <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• Download pdf files open in wordpad and can not be read

  After downloading some files open in wordpad and they cannot be read.they appear as a sort of code.this that happens with both text and photo files.i can't find another application to try to open them in.

  Hello

  WordPad can't open PDFs correctly, you need a pdf reader, and the most popular is Adobe reader. Please download it from the following link and install it on your computer:

  http://get.Adobe.com/reader/

  (Please check snap).

  8.1 Windows comes with a drive, but it is not good enough.

  Kind regards.

• My computer is running slowly and some windows flash constantly...

  My computer is running slowly, specifically the internet, and there are some windows (start print, parts of the menu window and touchpad dell) blinking continuously.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Files in the cloud zero again "some files failed to Sync.

  I have zero files in the cloud at the moment and yet get the 'some files failed to Sync' when switching from WiFI. (Yosemite, MBP 2014)

  This majority often when I go to a public wi - fi like the Starbucks, where I am forced to "Accept the terms" on a Web page.

  I would like to use the functionality of storage clouds, but constant synchronization problems make it extremely unreliable and basically, I use dropbox.

  Please notify.

  Hi Edward,.

  I would like you to try this method to clear the errors you see, since you have information that you are not blocked by your provider.

  Shift + click on "View website" (clic click on any file in your creative cloud folder, then hold the SHIFT key and click view on the menu Web site)

  This method will Force Sync to restart and also erase the log and error table in the local database file.

  Please let me know if this clears the errors that you see.

  Thank you

  Warner

• "Some files to sync failed" error, but "creative cloud works normally. What should I do?

  CC gives me an error "some files not has not not synchronize", but when you click on the link, it takes me to https://status.creativecloud.com/ who says that everything is working normally. So why give me an error, but no solution? Why don't synchronize my files? How dio I solve this problem?

  If you're on MAC, open the utilities activity monitor.

  Then check if you get coresync is not responding error.

  Exit Office Coresyc also leave cloud creative Activity Monitor

  then restart and check.