Some problems of user interface

Similar Questions

• User interface on Storm problem

  Hi all

  I have a question about the storm. I have developed an application using JDE 4.5. The application works well, the 4.6 as well.  The problem is with the storm. The application is installed and to load, but I have some problems with the user interface.

  Here's the scenario: I have a main screen with 4 buttons (like a telephone switchboard). From there, I can click on each button that will take me to another part of the application. in 4.5 and 4.6 I can use the trackball to scroll to the desired key and then I can click on it.

  In Strom, however, if I try to click on a button, only the first box says (one that has focus by default). If I try to scroll down to a different button, I have to drag the cursor until the other button is selected, then when I let him go, is clicked. This behavior is not very friendly.

  I use a Manager custom as a container for all the buttons.

  I was wondering how I can detect which button is clicked and perform the click on this button, not on the one that is currently being developed?

  In addition, associated with the same question, how do I change the focus to another field by clicking on it? For example, I have 2 EditFields and I want to click on the second to give it focus. For now I have to scroll, but in the storm, is not very convenient.

  Thank you

  Daniel

  As you discover, "compatibility mode" is not very friendly to some aps.

  You should try to re - compile on JDE 4.7 to get rid of the compatibility mode and see if it's better.

  Caution: you may have to disable the compatibiliy mode manually (in the settings) now that the BB OS has identified your application as "not compiled on 4.7.

• Some software does not display the user interface, such as my mcafee antivirus

  For some time I have problems in some of the software running, they show any user interface when they start up. They just start and work properly but I have no display to change any thing or work on it as McAfee, hotspot shield etc thanks for the help

  My problem was that some program did not display on them.

  I solved this problem by using the mcscriptfix file
  Thanks for the reply

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• Speech recognition - recognition language is not language User Interface problem

  I want to get Windows 7 speech recognition to work with British English, but I get an error after the training, that the language of the speech recognition is does not match the language of the user interface. I got the thing defined in the locale UK and speech recognition in British English. Several people have suggested:

  • Change regional settings, restart, change back again, reboot. Does not...
  • Turning off the box that says look at my documents. Does not solve.
  • make a Windows 7 reinstall. Can't do like no Windows 7 no install disc came with the PC.

  Can someone help me solve this problem? Where is the language of the User Interface set? Would - this something to do with Office 2010?

  There is anecdotal evidence that the use of like CCleaner registry cleaners can cause this problem.

  Speech recognition Windows 7 CCleaner
  http://Forum.Piriform.com/index.php?showtopic=21936

  Speech recognition could not start because the configuration of the language is not supported. The recognizer language must match the language of the user interface.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5ba2cf1b-E97D-46d7-924D-b14007581786

  Have you contacted the manufacturer of your machine to see what the repair and the machine has recovery options?  Maybe he has a hidden recovery that is quite common nowadays for the OEM partition?  This should be mentioned in the manual or on their Web site.

• Problem with user API 5.0 interface components

  Hello!

  I have a problem with the user interface components.

  My application needs of the analogues of the toolbar and PaneManager (as in api 6 and higher) in BB API 5, but I have no idea how to make them.

  Please, need help

  Toolbar can be made with evenlyspacedhorizontalfieldmanager in the Advanced UI package available on the java dev site of bb.

• Problem scaling of the Windows user interface

  Animation of characters (Preview 1 and 2) both have problems with the Windows display scale. On my Thinkpad running Windows 8.1 and game scaling of the display to 125%, the buttons at the bottom of the Panel of the camera and the Microphone disappeared. If the display scale is set at 150%, buttons appeared but the whole user interface is very blurred. Here are 2 screenshots. The first is when the display is 125% and the second is when the display is at 150%.

  

  Please let us know. Yes, we could not do the work in support of the various parameters on Windows in Preview 2 PPP, but we are aware of these issues and hope to address them in a future release.

• vCops Web Interface - user interface problems

  Hi all

  Any who have relevΘ the UI bugs in vCenter Operation Manager 5.7, the dashboard tab appears for example and the weird user interface.

  I downloaded the file of vmware eggs and installed twice with the correct license.

  Any ideas?

  

  I see only when I have a problem with the license. Or vcops lost license number

  Frank

• User interface input box appearance problem with database field?

  Hello

  I use jdev11.1.1.7

  I drag a control table data to the user interface page as a form, my problem is the database with no data at this time here my page UI form have no data and also input textbox appearance also don't just do not...

  I need empty text boxes with appearance, but I got only names of attributes only

  can someone help me...

  Thank you..

  It is the expected behavior.

  If you want to see the input controls, you need to have a new or existing line at the British Colombia correspondent

• Update the user interface problems

  I have an application that has three buttons at the top of the other, but is never visible at a time.  On the initial configuration of the application, the user interface is correct, but once one of the clicked button events fire several buttons appear at the same time.  All buttons are dynamicslly created and stored in a table to access.

  A few snippits of code:

  The buttons are created like that and then added to a canvas:

  
  browseButton.label = "Browse";
  browseButton.id = trackNumber.toString ();
  browseButton.width = 92;
  browseButton.height = 30;
  browseButton.setStyle ("right", 0);
  browseButton.addEventListener (MouseEvent.CLICK, fileRef_browseHandler);

  
  removeButton.label = 'delete ';
  removeButton.id = trackNumber.toString ();
  removeButton.width = 92;
  removeButton.height = 30;
  removeButton.setStyle ("right", 0);
  removeButton.addEventListener (MouseEvent.CLICK, removeButton_clickHandler);

  
  clearButton.label = "clear";
  clearButton.id = trackNumber.toString ();
  clearButton.width = 92;
  clearButton.height = 30;
  clearButton.setStyle ("right", 0);
  clearButton.addEventListener (MouseEvent.CLICK, clearButton_clickHandler);

  canvasButtons.addChild (removeButton);
  canvasButtons.addChild (browseButton);
  canvasButtons.addChild (clearButton);
  canvasButtons.horizontalScrollPolicy = 'off ';

  Pretty easy.  Where the problem occurs is removeButton_clickHandler.  It passes through and hides all buttons and makes the Browse button active thus active / disable another image.  Turns on and off the visibility making:

  public void HideFileButton(currentButton:Button):void {}
  currentButton.setVisible (false);
  } / / HideFileButton (Button)

  public void ShowFileButton(currentButton:Button):void {}
  currentButton.setVisible (true);
  } / / ShowFileButton (Button)

  I see that the visible property is changing, but the UI is not hide the buttons that are no longer visible.  I got around this origin by setting the alpha to 0, but it seems I'm missing something simple.

  Can anyone shed light on what I'm missing?

  In general, you define the button visible = false immediately except the one you want to be visible.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Minimize the problem of the user interface

  Hello:

  When using the top right minimize button in Teststand CVI Full-Featured user interface, by clicking on the item in the taskbar does not work to restore the display of the interface. Instead, to do a right click on the taskbar and choose "unminimize". It's very confusing, particularly for our operators to test.

  Can it be fixed so that the button reduce works as a right click on the taskbar item and choosing to reduce?

  We use the CVI 9.0.1 and Teststand 4.0.1f1.

  Thank you
  Dave

  
  

• Problem with the receiver of messages in Backgroundlisterner Application user interface Thread

  Hi all

  I have a UI application with earpiece in the background with MessageListener interface and I'm regestering it to receive Notification of incoming text Messages on a particular port.

  But the notifyIncomingMessage() is never called and sms always comes in the Inbox.

  If using port 8855, and

  _mc = (MessageConnection)Connector.open("sms://:8855");
  _mc.setMessageListener (this);

  Detail of my code.

  I have one user interface application with the other point of entry, in the background I register mylistener, so he notifys me message inbound, and then I can launch my application with user interface.

  Code:

  My Application user interface.

  public static void main(String[] args)
      {
  
          if(args != null && args.length > 0 && args[0].endsWith("gui"))
          {
  
              MyUiApplication mb = new MyUiApplication();
              mb.enterEventDispatcher();
          }
          else
          {
              //Entered through the alternate application entry point
                  BackgroundListener.waitForSingleton();
          }
  
      }
  

  And my bottom Lisnter looks to...

  public class BackgroundListener implements PIMListListener, javax.wireless.messaging.MessageListener
  
  public BackgroundListener()
      {
          try
          {
              System.out.println("Adding the Message Listner");
              //Implementing the Message Listner:
              _mc = (MessageConnection)Connector.open("sms://:8855");
              _mc.setMessageListener(this);
  
          }
          catch(Exception e)
          {
          }
      }
  
  public void notifyIncomingMessage(MessageConnection conn)
      {
          System.out.println("BBBBBBB Received the SMS,Read Message Thread Start BBBBBBBBBB");
          Logger.log(DEBUG, "BBBBBBB Received the SMS,Read Message Thread Start BBBBBBBBBB");
          //startMessageReadThread();
  
          new Thread()
          {
              MessageConnection connection;
              Thread set (MessageConnection con)
              {
                  this.connection = con;
                  return (this);
              }
              public void run()
              {
                  try
                  {
                      Message m = connection.receive();
                      String msg = null;
  
                      if (m instanceof TextMessage)
                      {
                          TextMessage tm = (TextMessage)m ;
                          msg =tm.getPayloadText();
                      }
                      if (msg.equals(CBConstants.SMS_CMD_SYNC))
                      {
  
                      }
                      //if ()
                  }catch(Exception error)
                  {
                      System.out.println(error.getMessage());
                  }
              }
          }.set(conn).start();
  
      }
  
  public static BackgroundListener waitForSingleton()
      {
          //Ensure this is a singleton instance.
          //Open RuntimeStore and obtain the reference of BackgroundListener
          Logger.log(DEBUG, "In the Listener class");
          RuntimeStore store = RuntimeStore.getRuntimeStore();
          Object obj = store.get(RTSID_LISTENER_ID);
  
          //If obj is null, there is no current reference to BackgroundListener
          //Start a new instance of BackgroundLIstener if one is not running
          if(obj == null)
          {
              Logger.log(DEBUG, "In the Listener class obj is null so newBackgroundlistener");
              store.put(RTSID_LISTENER_ID, new BackgroundListener());
              return (BackgroundListener)store.get(RTSID_LISTENER_ID);
          }
          else
          {
              Logger.log(DEBUG, "In the Listener class, already a instance so will return the obj");
              return(BackgroundListener)obj;
          }
      }
  

  Can someone please suggest me where I am doing wrong.

  I also saw all the methods for sms listening, with the datagram and messagelistener.

  As this will be contineously run in the background, I thought about MessageListener.

  Any help appreciated.

  Thank you

  Anne Laure

  I received the demand for labour,

  I changed the port to '0', although it is in the Inbox. But now its okay for me, because the unit does not receive it IDE oucederomsurlesecondport 8855.

  Thank you

  Anne Laure

• The User Interface is larger than it should be, how can we solve this problem?

  Our marketing director is an issues with its user of Acrobat interface.  His vision of the overall UI is twice as big as it should.  We uninstalled and checked preferences but nothing has changed, everything up in the toolbar and stickies are larger than it should be, anyone have any suggestions or fix for this issue?

  Thank you

  Billy

  Hi Billy,

  I suspect that the size of the text in the control panel of the system is 150%?

  It can simply go in Acrobat preferences-> General-> then change the 'screen resolution grid' at 100%. This will force the user interface to operate at 100% as it did before.

  Please let me know if it works.

  Thank you

  Luke

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.