Similar Questions

• Screening has not properly

  I have a preset that tweaks clarity, vibrance, sharpening and lens correction.  I have recently applied to a new photo and it doesn't seem to do much.  I went to change it (right click on preset and selected update WITH CURRENT SETTINGS).  The white balance has been verified.  Is there a way to retrieve my previous settings?

  Thank you.

  You probably made a blunder upward the preset constantly update with the white balance only selected (try to recover from a backup).

  But here's an important note:

  Lightroom doesn't do a good job in handling process version in presets (and included with Lightroom presets specify a version of process when they shouldn't).

  If the preset was a version of process that did not correspond to the version of the photo process, the preset may not behave correctly.

  If I used many presets, I load all the presets into a text editor and search for the specific tricks of process version. If so, then make sure that there is an appropriate in process version. Then, store in a folder of PV20XX way to not use the bad pictures. If not, then make sure you strip the process out of the file and re version - save. Then restart Lightroom. Let me know if you need help, find out what elements are specific PV.

  If you want to know what settings were in a "Preset" applied previously, you can search for photos that have used it and compare the settings before and after the application of the screening. ChangeManager that makes the comparison easier and less error prone.

  Rob

• AIAConfigurationProperties.xml fusion has not

  Hello
  When I deploy a composite with the service configuration file AIAServiceConfigurationProperties.xml it is supposed to merge it with the main file and deploy it to the server. It does not work for us. We were work around the problem by manually adding the file properties and in update MDS ourselves, but this solution is not acceptable for TEST environments or PROD.
  
  The newspaper part of the merger of the delpoy produces:
  installation program:
  [copy] Copy 1 file in/export/home/awlstst/middleware/aia/ICPIPS/Patches/wls000002/CreateInvoiceListEbizOSSReqABCSImpl
  [echo] / export/home/awlstst/middleware/aia/ant/bin/ant f /export/home/awlstst/middleware/aia/util/XSLMerge/build.xml--noconfig - DforceMergeAIAConfigProperties = ${forceMergeAIAConfigProperties} - DaiainstanceName = xslMerge = / export/home/awlstst/middleware/aia/ICPIPS/Patches/wls000002/CreateInvoiceListEbizOSSReqABCSImpl AIA - DcompositeDir
  [exec] BuildFile: /export/home/awlstst/middleware/aia/util/XSLMerge/build.xml
  [exec]
  [exec] xslMerge:
  [exec] [copy] Copy 1 file in/export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/config
  [exec] [xslt] Treatment /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/config/AIAConfigurationProperties.xml to /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/config/temp.xml
  [exec] [xslt] Load the stylesheet /export/home/awlstst/middleware/aia/config/MergeAIAConfigurationProperties.xsl
  [exec] [Remove] Delete: /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/config/AIAConfigurationProperties.xml
  [exec] [move] Relocation of the 1 file to/export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/config
  [exec]
  [exec] BUILD SUCCESSFULLY
  [exec] Total time: 1 second
  [mkdir] Created dir: / export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/tempMetadata
  [copy] Copy 1 file in/export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/tempMetadata/AIAMetaData
  [Remove] Delete: /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.jar
  [jar] Building jar: /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.jar
  [Remove] Delete: /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.zip
  [zip] Building zip: /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.zip
  [echo] oracle.home = / export/home/awlstst/middleware/Oracle_SOA1/bin /...
  
  deploy:
  entry entry jump as serverURL property has already been set.
  entry entry jump as sarLocation property has already been set.
  [deployComposite] username/password... setting, user = weblogic
  [deployComposite] Treatment sar=/export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.zip
  [deployComposite] created temp dir = / tmp/deploy_client_1301396115598
  [deployComposite] Adding data file sharing - /tmp/deploy_client_1301396115598/MetaData.jar
  [deployComposite] Creation of HTTP connect to host:tstsoainternal.ad.ic.ac.uk, port: 80
  [deployComposite] Has received the server's HTTP response, response code = 200
  [deployComposite] clean temp dir: / tmp/deploy_client_1301396115598
  [deployComposite]-> deployment composite success.
  [Remove] Delete the directory/export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/tempMetadata
  [echo] oracle.home = / export/home/awlstst/middleware/Oracle_SOA1/bin /...
  
  
  So it is clearly finding the file, run the merge command and deploying on MDS.
  I looked at the file /export/home/awlstst/middleware/aia/aia_instances/AIA/AIAMetaData/MetaData.zip on the server and this fact has an AIAConfigurationProperties.xml file inside but it doesn't have the service properties in this file.
  It seems that the problem is that the merger is a failure.
  
  I tried to reverse-engineering AIDDeploymentLibraryTasks.xml (236 of the lines, seem to have bits relavent) but I find no basis, it may be faulty.
  
  
  Since then, I have no error message in the newspaper I don't know where to start working out where he went wrong.
  
  
  Can anyone help?
  
  Robert

  Hi Robert,.

  I think that the Service constructor generate a bad AIAServiceConfigurationProperty. We detect this as we using the PIP auditor - we got the fault "AIAConfigEntryDefaultSystemIdDefinedCheck."

  Please surround the ServiceConfiguration element with solve this failure to PIP audit and may be you could merge the file.

  Good bye
  Marcel

• Satellite C660 keyboard does not properly - multiple characters

  Hi all

  My keyboard does not work well.
  There is a keyboard lag and sometimes several characters are typed.

  Model is Satellite C660-PSC0SG - 01300L...
  Update the BIOS, I saw in a lot of forums but I could not find.

  Some ooone could help on this...

  Traorepaul,

  Naveen

  Hello

  You are right!
  The update of the BIOS could solve this as mentioned in this document from Toshiba:

  + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  Click on the link to the download page of the BIOS in this doc.

  Here you will find a BIOS update instruction:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  Good luck

• Data merge multiple records do not work

  Hi all

  When you try to merge multiple records, the result is the same if I selected just a recording.

  Here's the situation:

  Source file:

  • Excel file with several records, saved as a csv and txt

  The target file:

  • InDesign CS4 file with a single page.
  • framework of a text on the page,
  • a table with the header line and a line of body
  • every cell of body line contains a data field

  I went through all the necessary steps:

  • Choose the data source file (tried with csv and txt, the results are the same) and insert the fields in the table
  • chose "All records" to merge
  • to merge records: selected multiple records

  After choosing "Preview", I see only one record per page, and the new pages are created automatically for EACH record! This is not what I want.

  What I want is for as many records if poster in the table as possible and then to InDesign to create additional if necessary pages.

  What I am doing wrong, or isn't it possible?

  Thank you for all your comments!

  Several records, ID to duplicate everything on the page, so unless there is enough space for all of this, you will get several records.

  Think of it as a frame around all your items, group, then using the step and repeat, except merge data won't allow any element to extend beyond the edge of the drawing page.

• Yahoo: 'Sorry, comments has not been loaded properly. things may not work. "Circle of rotation... IE works fine.

  YAHOO comment section: "sorry, comments has not been loaded properly. things may not work. "I get a radial circle of spinning - not to load the comments. Firefox 8 worked well. Help?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Agent Extension SNMP event log has not initialized properly in windows 2008 R2

  I enabled the functionality of SNMP Service and found the following error:

  "Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

  I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

  According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

  I have a subscription with Microsoft technical support to download the fix mentioned the article above.

  Any help please,.

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Make a backup of ASR, saved, but at the end of the record, I got this message: discovery of the ASR diskette has not been created.

  at the end of the recording, I got this message: discovery of the ASR diskette has not been created. You will not be able to restore an ASR backup without the system information stored on this disk. What does that mean? Should I save my data otherwise? I don't have a floppy drive (I'm surprised if someone does) but I have a dvd read/write cd drive... One last thing. When I looked at the content on the flash drive with program de-Frag it was lit, which means completely fragmented, the program recommended it de-fragment it... is this safe with a file of this size on a flash drive?

  Original title: Saving went well, but

  Windows XP is too old to do something other than a floppy drive.  If the automated system recovery disk is important to your backup and restore needs (HINT: YES it IS!) then get a USB floppy drive to create the ASR disk.  Or get a copy of most modern backup and restore program that works under XP and use modern media (USB, CD/DVD, keys etc.) to create a startup/recovery media.

• "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Hello.

  I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

  The convenience store has found nothing wrong.

  I reinstalled the printer software.

  Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Thanks in advance.

  For troubleshooting, please follow the links with the steps below.

  Click on the link below to fix common printer problems:

  Solve printer problems

  Follow the steps below on how to print attachments in Outlook 2010:

  Print attachments received in e-mail messages. Outlook 2010

  Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

  Print from Outlook.com

  Follow the steps below on how to erase and reset the printer spooler:

  Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

  Keep us updated.

• WMP12 has not been closed properly. How do you prevent disabling my plugins?

  I found this description of the error:

  C00D0FD6: Damaged or incompatible plug-ins
  Windows Media Player has not been closed properly. A damaged or incompatible plug-in could have caused the problem to occur. As a precaution, the optional plug-ins have been disabled.

  The question: is it possible to disable this feature or on the occasion of some plugins like not optional ?

  I found a way by program. Before you start WMP, make sure all the registry keys under HKCU\Software\Microsoft\MediaPlayer\Health are deleted. That will tell the WMP on the next boot he was properly arrested even if it wasn't.

• get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  Original title: Windows Media Center

  Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

  Try this for me:

  Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

  If this does not work, try this:

  1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

  2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

  4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

  5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

  6. RESTART. It will not work until you restart your computer.

  7. Open Windows Media Center and see if the problem is resolved.

• BlackBerry 8530 Blackberry Smartphones has not worked properly!

  So I got my new Blackberry Curve 8530 with Virgin Mobile two days ago.
  I have the $35 / month plan with data UNLIMITED, web, & text and 300 call minutes.
  I love the phone, but I had a lot of problems with it:
  -When I download the Facebook app it says I don't have the service data to plan it and I even tried to download the v1.6 via the web instead of app world.
  -J' tried to make a BIS account and he said: he has not registered with the service and said to the multitude of the routing table thing and I did, I got the recording message and I tried to do a new BIS and it still does not work!
  -When I go to the configuration of email, it has only the option for a business account, and I want to use a personal account.
  -Blackberry maps is not in all folders or on the home screen, but it's in the options > applications folder.

  * In addition, twitter, Web app and everything work fine!

  I think that's all and I really want to know if you have solutions, and I really love this phone! I really want to know if it is a question of Virgin Mobile or Blackberry! :/ Thank you very much!

  Hi and welcome to the Forums!

  Everything you have said indicates that you don't have an appropriate plan data at the level of the BB on your BB. To use the ability to email Push RIM exclusive (among many other services), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• ..... Our records indicate that your account has not been updated as part of our regular account maintenance... ANYBODE ELSE GET THIS?

  Dear customer,
  Accounts from Windows Live Hotmail® has grown very rapidly.

  Our records indicate that your account has not been updated as part of our regular account maintenance. Due to the anonymous registration of free account we have seen mixes account and therefore blocking part of the account. So you're Advisor to answer our customers with your account information for the update and ensure you are the real owner of this account. Do this by clicking on the button answer.

  * Name and surname

  * User name

  * Password

  * Date of birth

  * Country or territory

  * Alternative e-mail

  * Password

  Any request for account information, whether through a Bank, a credit card company or an internet service provider is fraudulent.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily