InDesign - recently created in InDesign vector images appear jagged.

Similar Questions

• Lo-res images appear in the exported PDF from Indesign files - anyone else having this problem?

  I used Indesign for years without this problem...

  But I noticed recently that many of these images (PSD, TIFF, or JPEG) that I placed in Indesign files are exported as pixelated, versions low resolution when I export for printing (PDF/X-1).

  I tried different settings, but in each case, the image (which appears thin and sharp as seen in Indesign) came out like a pixelated mess blurred.

  This seems to have started happening in the past months.

  Vector graphics are fine.

  Anyone else having this problem?

  Or someone at - it a solution?

  Also use some PDF parameters where resolution is not sous-echantillonnees at all.

  Turn off downsampling.

  And I would like to test, when you export to PDF/X-4 would make to the resolution of the images.

  Just to know, if something is fundamentally wrong with your PDF export feature perhaps.

  Uwe

• Vector images of poor quality in InDesign

  I am just placing a vector image in InDesign I made in Illustrator (saved as .png), however, when I place it, it ends up being shoddy and staircase.  Dsiplay performance is set to quality and image quality changes when I change the size, which obviously should not happen.  Any ideas as to what is happening here and how to fix it?

  I'll be too busy for awhile to get there, but I will annotate the original a little file to show you what to look for when tracing and dynamic painting are used.

  You can set high quality in preferences (if I remember correctly) for all new documents.

  Take care, Mike

• InDesign CC image in line with the text layout

  I want to create a dialog box for an EPUB that seems similar to the tweets. It is a small image next to the text of each section of the dialog box.

  Using an embedded image, it looks fine in InDesign and seems fine if I export to PDF - but when I export as an EPUB images appear above the text rather than to the aspect of it?

  How can I fix? Is there a HTML or CSS solution that works for EPUB readers?

  Select the image and use the Options of the Export Object in the menu object

  Here is the indesign document

  

  Here's the epub file

  

• in InDesign CS6 text appears white when I select the text... :(

  For some time in InDesign CS6 text appears white when I select the text. And remains white when I it deselect.

  It is necessary to another page, higher or lower, to have the text re-appear.

  Mac OS X El Capitan 10.11.6

  InDesign 8.1.0.419

  Make Explorer 5.5

  Adobe fonts

  If anyone has an idea...

  PS Yes:

  -J' cleaned out font caches

  -J' deleted Indesign preferences

  If you mean that the text seems to disappear, then it seems to be a relatively common problem with CS6 in El Capitan.

  I use CS6 with El Capitan and you encounter this problem sometimes. It happens constantly some days and other days not at all, but I've never established exactly what triggers it.

  As Bob says, CS6 is not supported, so it will not be a solution, but if this is the problem that you are experiencing then tap the display between 'Preview' and 'normal' pressing 'w' will fix it - temporarily.

• I recently installed on a new PC for Windows 10.  A lot of PDF images appear as solid gray fields.

  I recently installed on a new PC for Windows 10.  A lot of PDF images appear as solid gray fields.

  Hi John,.

  Please come on in Edition > Preferences > Page Display

  Check the option display large Images

  Click OK

  Let me know the result.

  Thank you

  Abhishek

• Create a sequence of images

  Hello

  I am fairly new to InDesign, and I create an interactive document for export to a SWF for a prototype eBook.

  I'm integrating Flex 4.6 Adobe and InDesign. I learned recently that I need Adobe Digital Publiciations to enjoy the creative decorative Panel, and this was a major setback for my project as my budget does not allow me to purchase more resources. I develop an application for the Playbook, and the InDesign document contains 2 chapters of sample with interactive content. I plan to export the file as a SWF file, and features such as the audio and video are working fine on my playbook.

  
  Currently, I have converted an MP4 file to a sequence of images, and I would like to create a sequence of images where the user can simply drag through the images and see the entire process.

  Please Note: I did not have access to digital publications from adobe, so I can't use the decorative Panel.

  I need to know how I can create this sequence of images of InDesign CS5.5

  Thanks in advance!

  DPS Digital Publishing Suite.

  Bob

• The image is a vector image. Values based on the low-resolution proxy RGB eyedropper

  I've used Q2ID to convert a Quark InDesign file and when I use the eyedropper tool, I get the error message: "the Image is a vector image. Values of pipette based low resolution proxy RGB. Then he replaced the white text RGB and will not follow what I copy so basically I have to redo the entire formatting. I do a save as to a different name and restarted, but it has happened several times. I'm not placing an illustration of any operation, the text is not described, but I can't copy the format with the eyedropper tool. Any suggestions?

  Thank you for your time and your consideration.

  No.... do not see the message at all, but I think I found a problem with the top layer. Turn it off (it is already locked) then try again.

  Bob

• 46YL863: change TV channels - delay before the new image appears

  Hope someone can advise me please on an "issue" that's appeared recently with my 46YL863 TV.
  I say 'problem' rather than problem in case it's something to do with my settings, which is the cause.

  When I change channels I notice that there is a delay of several seconds of the current image to the new. I narrowed down it to this happens only when you switch from a HD channel to a one SD card, or from a SD card on a HD.

  In these circumstances the screen will first black, then blue and after a couple more seconds the new image of the string will appear.
  Switch between HD or SD channels and the new image appears almost immediately.

  This happened before the last two days, so either a fault has developed or I changed a setting in some way.

  I tried other plugs of HDMI input and the situation is the same.
  Any suggestions please?

  Thank you.

  > I tried other plugs of HDMI input and the situation is the same.
  This means that you are using an external decoder which receives signals from TV?

• Vector images

  Hi, I use windows vista, and I recently downloaded vector images purchased. They were saved as an eps file. How can I open them on my computer without going through adobe illustator. Whenever I try to open it, it just says that it is not a supported program.
  Thank you!

  Download and install GhostScript (required for IrfanView open the EPS files)- http://sourceforge.net/project/showfiles.php?group_id=1897&package_id=108733

  Download and install IrfanView - http://www.irfanview.com/

  This should solve your problem.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  display images in windows mail

  Until recently, the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  The problem is that IE9 has been installed by Windows Update and its not not watch 'bar info'.  See www.oehelp.com/OETips.aspx#15 for workarounds.

  Steve

• All images appear as the same interactive report... APEX 4.2.

  Hi, I have worked with apex oracle 4.2.2 window 7 theme 25
  
  I met the problem when I create interactive report with the BLOB column, I create the sample report and I used the GET_BLOB_FILE_SRC function to display the image in the report but I face these problems
  1 - the images do not appear when I run the report and all the images are empty
  2-i press should edit on any column and go edit page and then return to report once again and the image appear
  3-all folder have the same image (the image with the id that I pressed on)
  I mean when I pressed the record with ID 1 and go to edit the page, then back to the report the image with ID 1 appear in all records in the report, and when to change the id of the same question appear. I don't know what the problem is.
  pls advice me
  
  Thank you
  Ahmed

  Ahmed.F wrote:
  Hi, I have worked with apex oracle 4.2.2 window 7 theme 25

  I met the problem when I create interactive report with the BLOB column, I create a sample report, and I used the GET_BLOB_FILE_SRC function to display the image in the report

  Didn't it occur to you that it is important to understand exactly how you have used the function in the report? What is the report query?

  but I face these problems
  1 - the images do not appear when I run the report and all the images are empty
  2-i press should edit on any column and go edit page and then return to report once again and the image appear
  3-all folder have the same image (the image with the id that I pressed on)
  I mean when I pressed the record with ID 1 and go to edit the page, then back to the report the image with ID 1 appear in all records in the report, and when to change the id of the same question appear. I don't know what the problem is.

  Looks like you pass item values to the edit page for the values of service instead of the report column. See the example of SELECT in apex_file.get_blob_file_src to see how to use in a report. The values of p_v1 (and p_v2 if necessary) must come from columns of the report, not the page elements.

  Why do you need to use the function at all? Declarative using BLOB format is recommended.

• Cut a piece of a vector image

  Hai!

  I have a problem with a vector art that I downloaded on the internet. I need to cut out these droplets around the projection and multiply in free space. But when I try to do so, as in any other vector image that I worked on, all this falls apart. What I am doing wrong?

  Help, please!

  Link to the image: https://dl.dropboxusercontent.com/u/102781723/Farba.ai

  It is a very complex Assembly of thousands of frames to nested masks.

  I guess this was not created in Illustrator and you can not take place without causing damage. You can try to flatten transparency.

• Earser on vectorized image

  Hello

  I got a trial of Illustrator to see how it works for the inking of the scanned drawings. I watched some lessons online and ever come across a problem that I can't solve, so any help would be appreciated.

  I use a version-English so I hope that my translations of the shares will not be confusing.

  I imported the image into illustrator, then objects used-> plotter of the image and converted to a vector image with filling of the area and no respect. So far so good.

  I want to erase little mistakes in the drawing, that look like this

  

  If I use the eraser, what happens:

  

  If the path is oddly bend around the race of the gum, which is obviously not what I wanted to achieve. All the videos I watched on the gum, there functioned and if I just create a space with the form of the task and erase some of that, that works fine as well. What is different with the vectorized image?

  Thanks in advance

  You should have traced ignore checked white. It seems that if you have duplicate paths.

  Or else trace so that the result is a battery. This makes for easier editing.

• Why vector graphics appear pixelated when zoomed in, isn't Fireworks to support vectors?

  I am new to the use of fireworks, but I thought that would be great because it has vector and bitmap support. However, when I'm working with vector tools and a vector image, that I imported from Illustrator, if I Zoom in on the image, it seems that it is a bitmap image. Also, if I were to resize image fell 25%, then the tool he save a size similar to what it was in, it appears distorted and the quality will be changed? Why is this? I have this in Illustrator without these results. I thought that the vectors must be able to be resized upwards, downwards or upwards and down, and they should look relatively the same. Any ideas, what happens?

  I have screenshots of what I posted on another forum. But if you want to see screenshots, go here.

  http://www.SitePoint.com/forums/showthread.php?787277-help-with-using-CS4-Fireworks-and-ve ctor-Graphics-They-appear-to-be-pixelated & s = cd2134478a293cbc045bc150427d5674 & p = 4968267 #po st4968267

  Help, please. Thanks in advance! I really want to use Fireworks, but with this problem I might have to use illustrator and fireworks of pit all together.

  Josh

  Hi Josh,.

  I think that I have solved your problem. Please take a look at the attached PNG (ninja high comes from Linda PNG and the bottom is the cleaned one). I don't think it sooner - sorry! I should remember that the features don't get adjusted, as well as fillings (not below 1px in any case). I've gave too much importance to your resizing problem and saw no real distortions of the whole vector.

  Solution:

  1) design in Fireworks. Your illustrator vector had too many unwanted pieces which I cleaned.

  2) use not too many shots. I didn't, but we do not have too many forms with traits for vectors that need resizing.

  (3) when you are satisfied with your vector to make a backup, then at the end to convert your features in fillings (this feature by using the way-3rd Panel under Edit section).

  After all it is followed, you will get a scalable vector that looks good, even when it is small. In this case, I used the race only for the eyes and were then converted into fillings before resizing to display the smaller vector.

  -Anita