Index on the basic button model

Similar Questions

• How can I get the index of the current pulse model vi?

  I would like to be able to see the current index pulse model vi. According to the help of Labview, a pulse is generated whenever the entered delay (d) is equal to the index (i). Is it possible to get the current index that the vi is on? If so, how could I do that?

  Laura121,

  Your question suggests that you can not understand how the VI.

  You are referring to pulse Pattern.vi in the line object and Pulse Pattern.vi in the text of your message.  Here are the two live different in the context of your question, it seems that you are referring to the Pattern.vi impulse.

  When the VI is called, it returns a table in its entirety (of length = samples). For the Pattern.vi of pulse all the elements of the matrix results are zero except the index i = d, where the element has the value = amplitude.  So, there is no concept of "current index that the vi is on" with this VI.

  Lynn

• The basic button code - HELP

  Hello

  I desperately need help with some coding database if you please, because I am new to action script and demanded only the code I have so far from tutorials.

  What I have is a button that remains the same throughout the animation but a layer separate from the text on the top that will slip through on the mouse and then drag to the left on the mouse on.

  Before pasting the code I have for now, I just need to say I have merged the button and the text in a clip, and then double click to enter the instance that I then cut into layers again. I made an animation layer (called txt) text with start and stop points for sliding and on top of that, I made a layer of label for keyframes above the key points that I scored _up, anime_survol and _out. On top of all this, I made a layer actions with two key frames which have a stop(); above the point of departure and point of arrival of the blade through the animation.

  Here is a picture of the timeline and then both codes I tried to use:

  

  

  The name of the variable for the button itself is home_button, so ignore the button.mc in the first bit of the code.

  I use action script 3, so do not know what code is more relevant. But if you know the answer to this or can even just see errors in what I do please let me know.

  Thank you very much

  Adam

  1. you must pass the event object to the listeners:

  function buttonOutHandler (event: MouseEvent) {}

  code here

  }

  2. in your event listener, the first parameter must be a constant:

  home_button.addEventListener (MouseEvent.CLICK, buttonOutHandler)

  3. you cannot use ActionScript 2 and ActionScript 3 in the same Flash Document

  Happy coding!

• Need to change the text in the "Basic Transaction button bar" button

  Hi all
  
  I have an obligation to change the text of the "Preview settings" custom text button in ' * Basic Transaction button Bar * "model. Is there a way we can achieve this? If so, please let me know how I can open it this model.
  
  Thank you
  Vijay

  Vijay-

  You cannot change a seeded content model. You must instead make a copy of it, modify it and use the copy in your user interface.

  In the Configurator developer repository, access the User Templates interface-> content-> button bar models models and make a copy of the Basic Transaction button bar model. (You can leave your copy in the folder models bar button if you like, or create in any other folder of your choice.) Open the new template for editing and change the button Configuration Overview, change its Source of the legend (and perhaps his flipping text Source as well), the new text that you want to appear on the button.

  Once you have changed your new template to your liking, change the node root of the user interface you want to use and utility models of the user interface definition section, choose your new template for the Basic Transaction model.

  I hope this helps!

  Mathgamain

• Is it possible to return when he is on the left side of the screen so that the Start button is on the bottom instead of the top of the taskbar.

  original title: I wonder if it is possible to reverse the when it is on the left side of the screen so that the Start button is on the bottom instead of the top of the taskbar.

  I have a laptop wide screen so I move the taskbar to the left for more vertical space. I was wondering if there is a way to return so that the Start button is on the bottom and all the small icons of notification are on top?

  Hi Sparty11,

  Welcome to the Microsoft Answers site.

  Unfortunately you can not return the taskbar to display the start menu to the basic button. It's normal. If you move to the left or right, in both cases the start menu button appears on the top left or top right of the task bar.

  You can share your suggestions on tracking site.

  https://connect.Microsoft.com/dashboard/Info/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• CBO promotes the basic function of the index (descending)

  Location:
  
  Table 1 million records, 1 GB in size
  
  Multiple indexes, including an index on three columns, one of these DESC
  
  
  A particular query uses this index and made coherent 40,000 gets to return 1635 records.
  
  The plan

  ------------------------------------------------------------------------------------------
  | Id  | Operation                   | Name       | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT            |            |    75 |  1275 |     3   (0)| 00:00:01 |
  |*  1 |  INDEX RANGE SCAN DESCENDING| IHISTOJOUR |    75 |  1275 |     3   (0)| 00:00:01 |
  ------------------------------------------------------------------------------------------

  I have a second index on the same columns (in a different order) that much better appearss adapted to education.
  When forcing this index with a hint, the uniform becomes fall to as little as 16 for the same set of results
  

  ------------------------------------------------------------------------------------
  | Id  | Operation        | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |                 |    75 |  1275 |     4   (0)| 00:00:01 |
  |*  1 |  INDEX RANGE SCAN| IHISTOJOUR2     |    75 |  1275 |     4   (0)| 00:00:01 |
  ------------------------------------------------------------------------------------

  The statistics have been freshly calculated (for all columns size skewonly)
  Version Oracle 11.2.0.1
  
  
  I can't understand why Oracle choose the order of the function based on the normal index, however.
  
  
  Any thoughts?

  This is one of those cases where through a 10053 is probably appropriate.

  In my 10053 trace, I found this line:

  Using prorated density: 0.000000 of col #4 as selectvity of
  out-of-range/non-existent value pred
  

  COL #4 corresponding to the virtual column for the descending column in the index.

  There are a couple of notes on metalink about 'sub-optimal index is used when the index column is in descending order' and a number of bug - 11072246 - confirmed as affecting > = 10.2.0.5 and<=>

  In the notes for this bug, this seems relevant:
  "Selectivity of the Index has been calculated is not properly considering the DESC property.

  By the way, another possible oddity was that, even if I've calculated the statistics with the size of the sample of 100% and it checked with sample_size in dba_tab_col_statistics, the LO_VAL of DAT and the virtual column never matched.
  Convert the raw, DAT was a lo_val of 2 January 2001 and a hi_val 27-SEP-2003.
  While the virtual columns had 8 January 2001 and 27-SEP-2003. difference of 6 days. Weird, right?

  Published by: Dom Brooks on November 10, 2011 17:18

• -L' stop six options that are next to the lock button in the task in the task bar disappear from my computer.

  -The six closure options that are next to the lock button in the taskbar disappear from the my computer. When I click on the arrow next to the lock button, my only computer log screen and lock up instead of six normally closed options i.e (change user, locking, lock, re - start, suspend and logoff.)
  -The first step, I took is to check for assistance and support in my system, and I could not find a guide on how to restore six back closure options.
  -There is not any notification of any errors.
  -My product/name of Microsoft's Windows vista Home Basic edition. Model: Compaq presario CQ60 Notebook PC
  All I want is no details to restore my missing shutdown options. Or if you can restore it for me online.

  Hello

  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to start your computer in safe mode with network and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try the SFC scan on the computer in mode noraml.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  Run a full scan with your antivirus software and removal of malware/spyware.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Malware:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 4:

  You could also try to perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• By pressing the delete button puts the Vista computer to sleep

  Original title: Remove button puts computer sleep

  When I push the button Delete on my computer, it puts the computer to sleep.  How can I change this?   I have a Windows Vista program.

  Hello

   

  1 did you do changes on the computer before the show?

  2 does the problem occur when you connect the keyboard to a different computer?

  3. What is brand and model keyboard?

  Sorry to hear that.

  Third, the drivers and settings programs can cause the computer to turn out to fall asleep when you press the delete key.

  I suggest you to reference methods listed below:

  Method 1: Safe Mode and clean boot

  Check if the problem persists in safe mode. If the problem persists not in safe mode and check if the problem persists in the boot.

  Step 1: Safe Mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the site:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Wireless keyboard does not work in safe mode. If the keyboard is wireless, then skip to step 2.

  Step 2: Clean boot

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Method 2: Update the drivers

   

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Change the power management

   

  Restore the default balanced power management plan.

  See the site:

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  I hope this helps. If the problem persists, return and I will be happy to help you.

• Debug log 5 Apex: "cannot find index for the item.

  I just spotted some strange output in the debug log in an application built in 4.0, still, using this mode of compatibility, now in 5.0.1

  

  Some error messages for crawlers

  Fetch application meta data
  can not find index for component (3,15469335749905175)
  can not find region index for region #15469335749905175 when trying to add (1,15481314906419581) - it must be excluded because of REQUIRED_PATCH
  

  Can anyone advise me on what it means? Or what other information of interest?

  Nothing seems to be a problem with the page. The specified region is extremely basic html with a compilation option that is excluded. Other regions with the same compilation option do not report these log files in the debug.

  Scott.

  Hi Scott,.

  It is indeed related to the build option and you can ignore the messages. I'll put their debug level 9 If you don't see them in the normal debug output.

  Before the page is rendered, APEX load relevant metadata in the wwv_flow package global variables. For example, fill us the tables g_items, the g_buttons and the g_plugs with the definitions of element, button and region, respectively. We do not charge the definitions of components that are excluded by a compilation option. After loading these data, we must build relationships between records, for example, we calculate index of the item in the g_plugs region and store it with the definition of the element. If the region is excluded by a compiler option, but the underlying element is not, the computation of the element cannot find the related region folder in g_plugs. You get messages from debugging for this kind of inconsistencies.

  Kind regards

  Christian

• index of the tablespace

  Hello
  
  In our Organization, all indexes should be in there own separate tablespace. When poking around the inside of the Data Modeler, I don't see anyway to specify the space of storage that is recommended to use a particular index. The DOF it generates seems to omit the tablespace for indexes option. Any suggestions?

  In the left navigation pane, open the relational model. You should see a node for physical models (under the subview node). That open. There should be at least one there (10g or 11g depending on what DDL you have generated). Click with the right button on this node and select open (this is the part that is not intuitive). Now you should see a bunch of new nodes in the physical model including Tablespaces. Describe your tablespace names here. Once this is done, in the physical model, open the Tables nodes and then open one of your tables, then the index under that node. Double-click an Index name - this will give you a property box where you will find a table field with a drop down menu to your do the assignment.

  You can also set the default Tablespace Index like this:
  In the main menu:
  Tools-> preferences-> data-> model-> physics maker-> Oracle
  Check the "Index Template" box and then click View/Edit. This will give you a place to specify a default tablespace name that will then be generated in the DDL automatically for all indexes on this design.

• Help re - bind the Navigation buttons

  I have Adobe Flash CS3 Pro.

  I have a header navigation file supplied with my flash Web site template and I find it difficult to make sense of the actionscript. It has a logo with effects, 5 buttons main nav that move and two additional link above the navigation bar buttons. For now, let's focus on all the Navigation buttons. Here's what I've collected. I have several buttons text on a movieclip, and I successfully edited the text for each button. If I look at the actionscript code in the top layer of this movieclip I see:

  "gotoAndStop (parent._parent.num);"

  I also have a movieclip symbol separated (with effects) with 5 layers of buttons listed in the actionscript code with the following actionscript code associated with each key of numbers from 1 to 5:

  onClipEvent (load) {}

  Num = 1;

  }

  onClipEvent (load) {}

  Num = 2;

  }

  onClipEvent (load) {}

  NUM = 3;

  }

  onClipEvent (load) {}

  NUM = 4;

  }

  onClipEvent (load) {}

  NUM = 5;

  }

  On the top layer of these 5 buttons, I have the following actionscript code:

  Stop();

  This ["Item" + _root. Button] .gotoAndPlay ("S1");

  _root. Link = _root.button;

  I also have a symbol to separate with the following actionscript code button:

  on {(overview)

  If {(_root.link <> 1)}

  menu. Item1.gotoAndPlay ("S1");

  }

  }

  on (releaseOutside, deployment) {}

  If {(_root.link <> 1)}

  menu. Item1.gotoAndPlay ("S2");

  }

  }

  on (release) {}

  If {(_root.link <> 1)}

  _root.menu ["Item" + _root. Link] .gotoAndPlay ("S2");

  _root. Link = 1;

  getURL ("index.html");

  }

  }

  Now, my Web site template came with pages of html 5 that my flash navigation buttons are: (index.html, 1.html - index, index - 2.html, index - 3.html, index - 4.html, index - 5.html). My problem is that I created a new page (index.html, about.html, featured.html, projects.html, contact.html). I wish all 5 buttons to match these pages, not existing pages of standard "index - tswan.html.

  In addition, this probably isn't relevant, but each html page has something to that effect so I can see how they correspond to each button.

  < script type = "text/javascript" >

  var fo = new FlashObject ("flash/menu_vf8.swf? ") button 2 =', the 'head', '100% ', '144', '7', ' ');

  fo.addParam ("quality", "high");

  fo.addParam ("wmode", "transparent");

  fo.addParam ("scale", "noscale");

  FO. Write ("Head");

  < /script >

  I guess my real question is: what actionscript should I update or delete the nav button LINKS to work with my new html rather than the pages of index pages - tswan.html 5 standard he wants automatically a link to?

  When I try and add a "getURL" command to each of the 5 buttons and test to preview the film, the links work, but it messes up the effects of the movieclip. In other words, the buttons do not move, they are immobile, but the links work. If I added this command to each key somehow, what actionscript would I need remove so there are no complications? I need help expertise here because it would be much appreciated. I am a novice with Flash script and its killing me that I can't understand it. I asked for assistance in support of the model and all they came back with the following message, it was, and it was not helpful:

  1. You need to duplicate each button you change - it is very important.
     
     (2) update the script to search in a similar way:
     
     on (release) {}
     If {(_root.link <>num)
     _parent ["Item" + _root. Link] .gotoAndPlay ("S2");
     _root. Link = num;
     If (num == 1) {}
     getURL ("index.html");
     } else {}
     getURL ("index-" + Number(num-1) + ".html");
     }
     }
     }
     
     Update for:
     
     on (release) {}
     getURL ("http://www.google.com");
     }

  

  Also, I read the following discussion, which was helpful to a certain extent, but it is not always answer my questions about links to work.

  http://forums.Adobe.com/message/3614092#3614092

  Can I make the code see you now, it's an approach I've seen somewhat regularly for AS1/2 designs.  These "num" values that specifies the html pages that are linked.  Each button is assigned a value of num, in your case 1 to 5.

  Based on the line of code...

  getURL ("index-" + Number(num-1) + ".html");

  I think that your header links pages were named index - 1.html thru index - 4.html.  If you can see why I say that there is hope, that you can fix yourself.

  If you want to bind the new pages you either must name them agree with this convention, sense rename index about.html - 1.html, rename featured.html index - 2.html, etc... or change the way the values num are defined or updated profit.

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• Problems with iPhone 7 Plus the 'home' button?

  Today, I stopped at a store and looked at the time of 7 more for the first iPhone. I was curious about the new home of the haptic button.

  I didn't feel a thing well. I thought there might be a setting and so I asked a salesperson. He said he "thought" he could feel a bit and had me try things like closing an application and return to the home screen. But no matter how gently or strongly I pressed the home button, nothing happened. Once opened Siri, but then I couldn't close it.

  He couldn't have worked either do.

  So, while I admit that my "sampling" is small, with 100% of all so far the 7s iPhone I tried the home button does no haptic feedback and does not work well.

  As it was a display model, of course, I'm curious - are these kinds of common problems?

  I just posted my concern in this regard. I have the 7 +.

  and the home of the Taptic button does not work. I have to still physically, press on the

  button as I did with the 6 +. So what is the difference?