Indexing of wrong numbers from shows

Similar Questions

• Wrong numbers quiz

  I have a quiz that comes at the end of a presentation, and I can't get the numbers to cooperate.  First of all, the 'issue X of Y' is wrong... He has the number of the slide, as opposed to the number of question.  Is there a way to show '1 in 4' as opposed to the ' 27 of 35 "?

  In addition, the results of the quiz come out wrong.  There are 4 questions, and even if get them you all right, he said I got 40 points out of 60, 4 questions right out of 24, with a 67% accuract.  Where it becomes these numbers from?  4 of 24 is not 67%, slide 24 is the second question, so I don't know where he is 24 in any case, and I don't know why he thinks that the maximum score is 60.

  So, basically, my variables got all screwed up somehow.  Any thoughts?

  Hello

  You didn't tell what version of CP you use, which allows to meet. Please can you check the view of Advanced Interaction (Project menu)? There you will see that the total score can be, and it lists all the objects and issues that obtain a score. Perhaps, you have several items marked on the other slides.

  Lilybiri

• How to generate random numbers from 1 to 5

  How to generate random numbers from 1 to 5

  -1110340081

  Thank you I ended up

• How to convert numbers from decimal to binary in the Windows 7 calculator

  Hi how I can convcert numbers from decimal to binary using the calculator of windows 7

  1. launch the calculator
  2. click on 'View', then select 'programmer '.
  3. click on the 'Dec' option box on the left side.
  4. Enter your decimal number.
  5. click on the radio button 'Bin' to convert from decimal to binary.
  6. the binary number is displayed.

• NUMBERS FROM 1 TO 300 WITH THE HELP OF THE TABLE 'DOUBLE' IN FROM CLAUSE

  Hi masters.
  
  I need display numbers from 1 to 300.
  We can achieve this by
  Select rownum from TABLE_NAME where ROWNUM < = 300;
  
  But the need to display table DOUBLE...

  Try this:

  SELECT the level "Numbers."
  OF the double
  CONNECT BY LEVEL<=>

• Extract numbers from a string

  Hello
  i'numbers in the neck of string arrecnote
  
  Please help me in this...
  
  Published by: smile on October 7, 2010 05:33
  
  Published by: smile on October 7, 2010 06:14

  Try this to extract the numbers from a string:

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select 'hello-cycle monthly settlement;  865.15 SDR
    2  
  multilat net 218.15 (USD) USAWW-USACC-2007/10' col1 from dual)
    3  SELECT * FROM
    4  (SELECT REGEXP_SUBSTR(col1,'[0-9]+.[0-9]+',1,lvl) col1 FROM
    5  (select col1,level lvl
    6  from t
    7  connect by level <= LENGTH(col1) - LENGTH(REPLACE(col1,' ')) + 1))
    8* WHERE col1 IS NOT NULL
  SQL> /
  
  COL1
  --------------------------------------------------------------------------------
  865.15
  218.15
  2007/10
  
  SQL> 
  
  -- or if you just want the numbers with its decimal
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select 'hello-cycle monthly settlement;  865.15 SDR
    2  
  multilat net 218.15 124 (USD) USAWW-USACC-2007/10' col1 from dual)
    3  SELECT * FROM
    4  (SELECT REGEXP_SUBSTR(col1,'[0-9]+[.][0-9]+',1,lvl) col1 FROM
    5  (select col1,level lvl
    6  from t
    7  connect by level <= LENGTH(col1) - LENGTH(REPLACE(col1,' ')) + 1))
    8* WHERE col1 IS NOT NULL
  SQL> /
  
  COL1
  --------------------------------------------------------------------------------
  865.15
  218.15
  
  SQL> 
  

  Published by: AP on October 7, 2010 05:43

• Restrict a TextInput to accept only numbers from 0 to 250

  I want to restrict a TextInput to accept only numbers from 0 to 250. I know that I can use limit to a certain extent, but all I can do is limit to 0-9 and use maxChars to 3 that allows any number from 000 to 999.
  
  I think I could use the TextEvent.TEXT_INPUT and then write the code that will convert the text of the event (i.e., the text entered in the textInput component, before it is actually added to the text of the textInput component value) such that I allow not values greater than 250, but I'm not sure of what would be the code. Does anyone know an easier way to do this?

  Use the change event to monitor the input value and if it is greater than 250 (after tapping the property text as a number), assign the property of text to be "250".

• 2 iPhones showing the wrong numbers.

  This one delicate, I have 2 iPhone 6 s more the first one I had on pay as u go the 2nd on EA I used the premiera a few weeks when my new phone contract is arrived, I didn't know that at first where it shows my number in contacts that it was pay as u go number so I investigated further and connected to iTunes on my pc. Oh it so my EA phone contract had the correct serial number but the wrong number attributed to it and the same thing on pay as u go good series number wrong telephone number. I tried all this support told me to trying to delete one of them was a nightmare and deleting and restoring the software just bought the same wrong telephone number problem right serial number. If I create another Apple ID I do not think that that will not solve the problem because the details of the phone are incorrect, I realized just today the problems it has caused I had changed pay as you go phone then even if I still received calls on my phone EA I was not receive voice messages they were all gone to the other phone. I'm now having to carry two phones autour so I can make calls on my phone EA but receive receive all calls etc on my other phone. Can anyone help please. Thanks Heather

  Talk to your carrier to get reassigned numbers. This happened to me once when we had new phones. My number is assigned to the phone to my wife and hers to mine. It's a simple switch by our carrier to assign a correct number to the right phone.

• HP 35s: HP 35s calculator Faction Mode showing the wrong numbers

  This happened to me in the middle of a math test while he was really awkward.

  I use a HP 35s calculator, and it is completely worked fine for me for a year.  I was using the display mode of fraction I discovered recently to convert numbers in the below form, and so I hit: 1201/5525 and it gives me 603/2774.  No matter how you think about it, it's wrong.

  It happened again with 24/5525 becoming 14/3223 and sometimes more.  It's always like that.  I was trying to understand what went wrong and discovered that 24/5525 equals168/38675 while 14/3223 equals 168/38676.  It's the wrong number.  This could be great for decimals, but I work with exact fractions, and I need the exact answer.

  It works very well for things like 6/4 or 2/10, but as soon as he is big he has the answer a few places.  Is it possible to fix this?

  The fraction of the 35 s mode is limited to a maximum denominator of 4095.  He never returns a denominator more than that, so don't expect everything. No, there is no way to set the maximum denominator to something higher to 4095.  You can * down * as maximum for a small integer (between 2 and 4095) by typing and pressing/c button (left-shift, comma).  There is a shortcut to 4095/c is 0/c.

  In addition, make sure that both flags, 8, and 9 is clear, or it will totally mess up your work as a fraction.

  Hope that helps!  DISCLAIMER: I do not work for HP, but HP works for me.

• Page numbers from index opened in indesing using javascript

  Hi guys,.

  I'm looking the code to open the page range in the InDesign file. Can someone share the JS code to open ranges of pages in the document ID CS5.5

  See the screenshot of the mentions in the document below. Some entries of my having to single digits after the dash.

  

  I hope that this will soon get positive response.

  Kind regards

  DanuP

  Post edited by: Danu Prasad

  This forum is not a platform for access to ask people write it free custom scripts.

  .. But, luckily for you, this question was interesting enough to spend 5 minutes on. It turns out to be as easy as I first thought:

  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat="\\d+[-~=]\\d+";
  r = app.activeDocument.findGrep(true);
  while (r.length)
  {
      t = r.pop();
      s = t.contents.split(/\D/);
      s[1] = s[0].substr(0,s[0].length-s[1].length)+s[1];
      s[0] |= 0; s[1] |= 0;
      u = s[0];
      while (s[0]++		   

• How can I get a subarray of numbers from a table?

  I have a simple VI...

  First generate a 2D random numbers table. This 2D chart, I have to show only numbers in a table 1 d.

  Thank you very much!

  Here's a way...

  Auto index table 2D using a nested FOR loop (FOR inside a loop FOR). If the table element contains no remains divided by 2, then it is an even number so only will be added to your table 1 d.

  It's stuff right in front...

  Try a combination of the following labVIEW

  Tips:

  -For loops

  -Quotient & rest

  -= 0

  -Shift register

  -Build table

  Stroke

  (There may be solutions to this problem better/other/more effective and less effective etc. etc.)

• index of output table and show what LOCAL indexes and who are

  I read the view of ALL_INDEXES here:
  http://www.Stanford.edu/dept/ITSS/docs/Oracle/10G/server.101/b10755/statviews_1061.htm
  But I still don't know how to query follows:
  
  1. display the name of the table, the index name and flag Y/N 'Is the local index' and a flag "is the overall index.
  
  The application should output table index and show what indexes are LOCAL and which are not.
  
  How to write this query?
  
  My original request:
  

  select table_name, Index_Name, Uniqueness, Partitioned, decode(Partitioned, 'NO', 'Global','Local') GlobalOrLocal from all_indexes
  where table_name = 'MyTABLE'

  2 I understand that global index for partitioned tables is a chunk of data referencing all the partitions table in the single room, but Local index is partitioned itself there are several parts each one or more partitions to reference table?
  
  Published by: CharlesRoos on October 6, 2010 12:45 AM

  CharlesRoos wrote:
  I read the view of ALL_INDEXES here:
  http://www.Stanford.edu/dept/ITSS/docs/Oracle/10G/server.101/b10755/statviews_1061.htm
  But I still don't know how to query follows:

  1. display the name of the table, the index name and flag Y/N 'Is the local index' and a flag "is the overall index.

  The application should output table index and show what indexes are LOCAL and which are not.

  How to write this query?

  My original request:

  select table_name, Index_Name, Uniqueness, Partitioned, decode(Partitioned, 'NO', 'Global','Local') GlobalOrLocal from all_indexes
  where table_name = 'MyTABLE'
  

  That seems Ok to me.

  2 I understand that for partitioned tables index global is a big piece of data referencing all the partitions table in the single room,

  Yes.

  but the Local index is partitioned itself there several pieces for each reference one or several partitions table?

  Almost right: each refers to score exactly one table. I.e. index partitioning is 'aligned' with the partitioning of the table.

• I want to block images from showing when I open a web page

  Firefox used to block images on Web sites, I can't understand how to set up now. Is it still possible? I'm tired of my son be bombarded with ads with inappropriate images. Please help me solve this problem. I went from Chrome because I was told that this was possible on Firefox. If not I have no need to spend. Thank you

  This does not solve my problem. It has already been put to '1' block all images. And the images show always. Any other suggestions?

• How to eliminate specific numbers from a digital controller based on bollean LEDs?

  I have a LED bollean table. When I turn on a specific number of Boolean values it should perform a digital output controller. For Ex: From the table of Boolean if I turn on the LED 1, 3 and 7, the digital controller should now only givce monia 1.3 and 7 numbers instead of all sequence numbers. Is there a way to do this?

  Here is a much simpler version of the example given above.

  

• my toolbar has suddenly stopped from showing small screenshots and just boxes with writing in

  the toolbar at the bottom of windows 7 which shows what I have running in the form of images when I fly over, changed from one day to the next day in the small blue boxes with only the name, how did this happen without my permission? and how to change this back?

  Hello Miss,

  This happens usually when the number of Windows Open exceeds the amount of space available to display thumbnails (the 'photos' you refer to). Try to close the number of windows open you have and see if that solves the problem for you.

  Kind regards

  BearPup