indicators inside the loop does not display a value in hand VI

Similar Questions

• SR400 while the loop does not work

  Hello

  I'm using LabVIEW for control SR400 through a GPIB card.

  I use SR400 to count the number of signal in a second, wait 0.05 s, then again count the signal once, wait 0.05 s once again, and so on.

  However, the while loop didn't iterate. When I started the program, it is only once.

  In execution of highlight mode, when an iteration is finished, he waited a long period starting the next. In normal mode, it doesn't have to iterate.

  Also when I clicked the stop button, it's been clicked. However when I wrote a very simple program, the stop button worked normally.

  In any case the button issue is not very important. I don't care that the program iterates forever or not. I just want to iterate.

  I searched the jury and had not could not any related problem.

  Is it better to attach my VI? The VI is in my computer lab.

  Thank you very much!

  This code just feels bad.

  (No real management mistakes, deep, stacked sequences FOR lines that are wired to iterate through only once, controls on the right and right to left, wiring weird code on average the last 10 items (Hint: means ptbypt with a length of 10 sample he would!).) If you want to use the wire of the error, the sequences would not even necessary)

  If the stop button does not reset, it means that the iteration of the loop does not terminate. It can fill in only if the two structures of the sequence ends.

  Have you tried running in execution, emphasizing fashion while looking at the diagram? Probably one of the communications is at a standstill. For example, the instrument sends really 6 bytes at the end? When you set the overall timeout and what is it?

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• Impossible to change the wallpaper, the location of the image does not display images.

  Original title: photo location not display images

  I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
  I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
  In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
  One last thing.
  If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.

  Any ideas?
  James

  I got it working again.
  And that's a good reason to not mess with the registry.
  I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.

  James

• The Explorer does not display a pdf thumbnails

  The Explorer does not display a pdf thumbnails

  Hi Ken,

  With several comments from our clients and requests for the same thing, we have implemented return thumbnail preview.

  With the update of October of Acrobat DC published last month, we added back support for PDF thumbnail previews in Windows Explorer for 32-bit systems.

  Please note that by default, it is disabled. To activate the same, please go to Edition-> Preferences-> general and turn ON the thumbnail «Previews Enable PDF» checkbox in Windows Explorer

  In a future update of the software Reader / Acrobat DC, we are looking at the possibility of adding back to back support of PDF thumbnail previews in Windows Explorer for systems 64 bit as well.

  Kind regards

  Rave

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• N ° of the VM does not display.

  Hi, I'm trying to generate a custom report to display the number of VMS in each Cluster under a vCenter. I am able to get a chart, but in the chart it does not display the numbers completely

  for example if the number of VM is 1005 is show as 1 K only.

  

  Hello

  Can we please add screenshots showing what measures/properties you have selected and if you chose a specific way to make them?

  Thank you

  Golan

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• inside the host does not ping external host in transparent mode

  Hi all I need urgent help on this pls I have host on ip add 1.1.1.2/24 connected inside interface of the pix with ios 7.0 in transparent mode. and the external interface of the pix connected to a router IP 1.1.1.1/24.i enabled icmp inspection.i can see the router arp entry into the host and the host arp entry in the mac address router.both are well learned by the pix. no traffic flow form the host to the router. There is no access on the pix of pix.the list does not create an arp entry in the stange very pix. I tried to manuaaly add the entry:

  ARP in 1.1.1.2 0011.d80d.f6ac it gives an error <1.1.1.2>not allowed. network address I do not get it .my question is why the pix don't is not create entry arp. what could be the problem. could someone pls help me with this thanks pls.

  Assane

  Lol this is not as you mentioned. I'll explain the communication all in detail. I hope this helps.

  Assumptions:

  PIX configured to L2, with outside as 0 and inside as 100. insidehost on inside the network and external network configured outsidehost.

  scenario 1

  ==========

  If pix is not configured with the IP address, all IP packets are dropped and syslog Id 322004: no management IP address configured for transparent

  Firewall is saved. So lets see how communication works on L2

  outsidehost tries to communicate with insidehost. ARP request is from outsidehost and is sent through dissemination and it is received by PIX and sent to the inside network, without change.

  Return of InsideHost and the response is sent through to the outsidehost. When you see the arp on the outsidehost and the insidehost entries you will find the corresponding arp entries.

  PIX will forward arp request/reply.

  You can give the command "local host" and you won't see any entries created on the box.

  2nd scenario

  ==========

  An ip address is configured on pix and insidehost starts communication with the outsidehost. Communication is from top to bottom and will allow pix.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from insidehost to outsidehost.

  Connection between outsidehost and insidehost is denied because there is no access list to allow traffic from low to high.

  You can give the command "local host" and you will see the entrance to insidehost, outsidehost.

  3rd scenario

  =============

  An ip address is configured, created in order to allow the circulation of outsidehost insidehost and applied to the external interface of access list access list.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from outsidehost to insidehost.

  Access list being present to allow the traffic, the connection is allowed and entry is created in the box.

  Hope that the foregoing erases the entire communication L2 and the communication of different security levels.

  I hope this helps.

• V11.0.12 XI and IE11 Acrobat. Hyperlink inside the PDF does not work when the PDF file is opened with any browser.

  V11.0.12 XI and IE11 Acrobat. Hyperlink inside PDF is a blue rectangle and links to another PDF. When PDF is opened in Acrobat, the link works. When opened in any browser (IE, Firefox, Chrome) the link does not work. How can I get the link to work in browsers?

  I think it is a bug. I uninstalled Acrobat and reinstalled Acrobat v11.0.0. I tried the link and it works properly. Then, I installed each both updated and tested the hyperlink. Update 1-10, that the link works. However, when the 11.0.11 update is installed, the "Go to a page in another document" hyperlink stops working in browsers. V11.0.12 installation does not solve the problem. If I uninstall Acrobat and install v11.0.0 with updated v11.0.10, everything works fine.

• If the statement does not show 0 values... works not

  I am trying to write an if statement that does not display columns if NVL_COL_1_AMT_0 equals 0 and column is zero. I tried to many if statements and <>, & gt & lt, etc.. None of them work. It seems that the simple syntax below should work so I looked at only 1 column, but it is not no longer works. Does anyone know what the problem is with the following statement.
  
  <? If: NVL_COL_1_AMT_0_! = 0 ? >
  <? end - if? >

  I sent that you back up the modified model. Please take a look.

  Thank you
  Bipuser

• While the loop does not stop within a structure of business

  Hi all

  I have a business structure that works an engine to a certain PWM when my metal detector does not give an amount greater than the threshold that is ' false '. The motor is controlled by a PI controller so a while loop is used inside the false state. When my metal detector exceeds the threshold I want the "true state" to perform but which does not occur. the entire program is a while loop which aims essentially to maintain the operation of the metal detector. How can I make the State of the switch works.

  Once you get the code is trapped inside the inside while loop, it will never be a Boolean wire change because change is outside. All you need is a loop that contains a structure of housing. Run your program with execution highlighting to get a better understanding of the flow of data.

• pass the loop does not work in a MIAW

  Hello

  Try to open a movie in a window (MIAW) with this code:

    wndAbout = window().new("about")
    wndAbout.open()
  

  The film about.dir has a few simple tricks, a label on the first image, and a script "go loop" at frame 10 on channel script.

  The window opens and about fine display, but the problem is that the loop go does not work. The playhead continues. I also tried with a go the frame without success. The channel of script is activated, I checked with an alert() call.

  If I try the code above in a new movie with only one button, it works.

  Tried to remove all of the original film but the script and the button, it doesn't always.

  Someone has an idea of what could be the problem?

  Thank you.

  Edit:

  Windows 7 64B, Director 11.5.

  The problem only occurs with the projector (heel). In design mode, there is no problem.

  After hours of tests, I found the solution.

  The problem was buggy text by hyperlinks members in previous versions of 11.5.

  First solution was to remove the members of text.

  Then I've upgraded all xtras (external to the latest version (11.5.9r629) projection) and all problems where gone.

• While the loop does not stop until 2 more clicks

  I must say that I'm really not familiar with LV, but Im learning.

  So why is that after I clicked on low stop, I had to click my OK button twice, then my program stopped. Why can't it stop immediately?

  Furthermore, if I want to do some of the dice to table, which wire do I missed?

  Thank you!

  Hi RawtoLV,

  You have a while loop in loop a while. When you run the other while the loop stops when you press the stop button, the inner circle while loop always executes. Since your OK button use latch release, what I noticed is that when you pressed the OK button, it quickly into position from true to false, which never stopped during the operation of loop (maybe because of the wait). Can I ask what are you actually doing with the structure of sequence?

  I would suggest using the event structure in place (http://zone.ni.com/reference/en-XX/help/371361K-01/glang/event_structure/):

  

  

  

  Here are some information about the structure of the event:

  http://www.NI.com/white-paper/3331/en/

  http://www.YouTube.com/watch?v=8eO64fo3Pho

  Warm greetings,

  Lennard.C