Pavillion h8 - 1160t: new GPU unrecognized.

Similar Questions

• Pavilion P6720TR: Installed new GPU does not work

  I upgraded my old PC pre-built 2011 with Corsair VS 450 & Asus GTX 750 it. I installed my new GPU and everytime I turn on my desktop computer is blocked on startup of HP logo and it will emit several beeps. I think that HP motherboards are not compatible with the new GPU OR the HP bios are totally incompatible. There are HP experts who can help me with this problem?

  The issue that you are facing, it's that the new video card requires a motherboard that has a UEFI BIOS.

  Your card mother HP 2011 has a BIOS that is inherited and is not compatible with the newer video cards. Install a compatible with legacy BIOS video card and it will work in your HP PC.

  Unfortunately, mixing the new and the old BIOS technology just doesn't work. It has nothing to do with the fact that it is HP. you would face the same situation with any motherboard 2011. These are the days of the legacy BIOS. 2012 and new PCs and laptops use UEFI BIOS.

• dv4-2045dx re-ball of soldering and new GPU. Worth it?

  While we all know the story, older laptops tend to GPU frying. I did enough research now to know the following:

  I can buy a card mother reburbished and place shims between the GPU and the radiator, add some thermal paste and I hope the thing works for a few months.

  I can have someone weld in a new GPU (2010) and fix the problem for good.

  Is this useful? I bought a new card on eBay, but it does not solve the problem. Finished cooking my motherboard and it worked for about six months until what the hard drive went bad, and now the GPU has gone wrong again. I'm tired of opening up this computer and not fixing the problem. I'd just like to operate and sell so I can buy a new tablet. I don't really need this computer, but if I can get it fixed for good, it's not worth?

  Thoughts?

  I'm not real comfortable with the idea of setting temporarily and selling it. In my opinion honest, it provided the best service as possible, his best days are behind it, and there is no sense that delay the inevitable.

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• New GPU building only or full?

  Sorry if this is a tired topic, but information that is older than 3 months are old for me. I was wondering if I could benefit from upgrading my graphics card only and thus hold off on a new construction for a while. My current system:

  Windows 7 Ultimate 64 bit SP1

  CENTRAL PROCESSING UNIT

  Intel Core i7 2600 K @ 3.40 GHz 43 ° c.

  Sandy Bridge 32nm technology

  RAM

  32.0 GB Dual-Channel DDR3 @ 799 MHz (10-10-10-27)

  Motherboard

  ASUSTeK COMPUTER Inc. P8Z77-V PRO/THUNDERBOLT (LGA1155) 37 ° C

  Graphics S

  1535 MB NVIDIA GeForce GTX 580 Amp! (ZOTAC International) 44 ° c.

  Storage

  CACHE & PREVIEWS 111 GB ATA KINGSTON SH100S3 SCSI Disk Device (SSD) 34 ° C

  OS DISK 238 GB ATA SSD Samsung 840 SCSI Disk Device (SSD) 35 ° C

  CAPTURE C STORAGE of 16 TB Intel Raid 0 Volume SCSI Disk Device (4 x 4 TB) 34

  DNxHD 220 images

  DSLR images

  AVCHD

  Optics Blu - ray discs

  HL-DT-ST BD - RE BH16NS40 ATA Device

  I was when I built this system of shooting HDV, but am now shooting with a 5 d Mk III DSLR and a Canon EOS C100. I save DNxHD externally on Atomos Ninja Blade.

  Although this system seems pretty well balanced, I have never been able to do much more basic editing with effects in real-time of first, since anything else (as noise reducers, MB looks and effects of the red giant) pretty much paralyses reading my system, rendered, export. Even with the HDV footage, I was never satisfied with the performance. I recently updated my 2 drives 0-4 discs 16 RAID storage to RAID 0, which seems to have contributed to transfer a bit rates.

  I wonder if the GTX 580 is defective.  It seems to work pretty hot slot load to 60 degrees or more, unless I pushed the fan speed to the max. I can't change GPU clocks speeds or other default settings without the display crashing. That's why I'm considering a new GPU. In any case, I intend to build or buy a new PC within a year, but it would be great if a GPU could extend the life of it.

  For a new built complete, I need to know if now is the time to do so. Or, is it a new series of mother/Processor Board on the horizon that I should wait? The frustrating thing about these types of discussions of the forum, is that the information is quickly dated and obsolete.

  60 c is not outside the norm for Nvidia GPU, especially the 500 series cards. The GPU is immune to the bottom of the range 80 c and will often strike up to the 1960s under load. Fan profiles may indeed that some, but that seems normal here. Synchronizing the card upward can certainly cause instability, according to the bios settings and the power supply of the system. I don't know if a 760GTX4GB could make a big difference with the effects that you list here, but that would be the card to get with this system. This system will not push the 700 series above the cards. Your limit at this point is really the CPU but that can at least you tide over until you're ready for a new system.

  Eric

  ADK

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• P7-1109: start new GPU screen freezes on HP

  I have an Asus GeForce GT 720 (2GB) for my pc that my old man had to be changed and the motherboard display output is broken, my previous GPU is a Zotac GeForce GT 430. Then when I put in the 720 GT my computer is located on the HP splash screen that says Press esc to menu start or something like that, but then is not beyond that point. It seems that the computer hangs in fact to this screen that hitting esc doesn't do anything other than make weird noise from the speaker to the mobo. The old GPU will be past this point, but the new custom pc boot. IV tried many things, after looking through the forums and havnt found an answer that worked. Help, please!

  Currently, there are several discussions in the forums of HP on an almost identical situation.  Most are trying to use the 750 GT, but the same family of card.  The motherboard (IPISB-CU (Carmel2)) and this family of graphics cards do not agree.  It boils down to a compatibility with the motherboard.  Additional research is necessary if you want to go to a family of different graphics cards, but the WG 7 * will not work.  Some have had success with the GT 6 *, but no guarantee.

• Need new GPU, cooling for Qosmio G20 module

  Anyone know where I can get a new fan for GeForceGo 6600 graphics on my qosmio G20?

  I don't know if this GPU cooling module is m.
  However, all compatible parts can be ordered from the authorized service partner.
  The technician may be able to provide more details on this part.
  As I m not wrong not the FSA can order these parts directly from Toshiba.

  Best regards

• Compatibility problem of motherboard with the new GPU [h8-1214]

  I tried to upgrade my GPU [gtx 560] to a [ti gtx 780] and it seems that when I install my end card higher than my computer [h-8 1214] won't go past the splash screen.

  My OS is windows 7 64 bit.

  I already did to try to fix things:

  -Power supply is adequate and bronze certified (750w)

  -Update my BIOS

  -try a different card (gtx 770) video

  At this point I am sure that it is the motherboard having problems, I would like to know if there is a work around or should I just get a new motherboard.

  Sianmors, welcome to the forum.

  You are right.  It's a motherboard problem.  Your new video card requires the UEFI Firmware in the motherboard, instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I suggest that you contact the maufacturer Technical Support to see if they have a VBIOS update that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP becomes new GPU drivers and Catalyst™ for ATI 7690 m XT mobile any time soon?

  I recently bought Pavilion DV7 with Quad processor i7, 8 GB ram and ATI 7690 m XT (2 GB) GPU (with swichable GPU Intel)

  On paper, it takes a monster (better than AlienWare) game machine but the GPU is slowed down by the other Jurassic GPU software support old Catalyst software.

  The catalyst used for this particular GPU is the catalyst for 2010 (which was fundamentally changed to support the new graphics)

  ATI mentions even this new 7690 m XT on their website alone while a real up - driver support date. !!!

  The 7690 m XT should have no problem to start Batman Arkham Asylum or City™ but it doesn't...

  It behaves like my old Toshiba with Nvidia GT330M graphics processor... (what is shameful)

  Ideas or the rummors of HP in fact ask ATI to provide new drivers? or are we stuck with 1000eur machine with graphics driver 3 years?

  http://h30434.www3.HP.com/T5/notebook-display-and-video/to-all-7690m-XT-laptop-users-please-post-to-show-HP-we-want-A/TD-p/1461177

• Pavillion DV6 1030US new SSHD: I can't scroll with my mouse pad. Keyboard is skip words

  I lost my original hard drive. I installed a new 500 GB SSHD in Pavillion DV6 1030US. I have received the help of the forum. I can't scroll with the original mouse pad and when I type I am jumping of lines and words.

  Do, I went to the HP site and download the proper drivers. Solved.

• Pavilion 500-420nl: installation of a new GPU in HP Pavilion 500-420nl

  Hello everybody, basically, I bought a HP Pavilion 500-420nl PC and decided to improve a bit with a new power SUPPLY and GPU. The new PSU: Thermaltake Berlin 630W and the GPU is Sapphire R9 270 X double-X OC. The problem is that when I insert the GPU and connect the 2 connectors of 6 pins, I get only a black screen. There is no beeps, the fan runs but the screen remains black. I deleted the old GPU drivers and the new one is plugged correctly, but there is only a black screen. The motherboard should be compatible with the GPU, seeing that it has a PCI-E x 16 slot 3.0. What could be the problem?

  Hello

  Please see the following documents.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• Pavilion 500-164: new GPU, 6 beeps

  I bought a new PSU (500W) and GPU (Sapphire AMD Radeon R7 265) to replace the integrated graphics card (also AMD), but at the start I'm hearing 6 long beeps cable VGA card does not show anything on the screen. Any help?

  Hello:

  Have you changed the two bios settings must be changed before adding a new card video on a PC that comes with the W8 or newer?

  If this isn't the case, please read the info on the link below for the settings to be changed.

  http://support.HP.com/us-en/document/c03653200

• PC does not start after the installation of the new gpu (GTX Gigabyte 770 2 GB)

  Hi, I just bought a 770 2 gb gigabyte gtx and my pc is stuck in the bios screen and beep every 10 seconds, I think that the version of the bios or the pcie is not quite new

  Data sheet: HP - Pavilion h8-1040

  Mobo: Pegatron IPISB-CH2 (Chicago)

  Intel core i7-2600 3.40 ghz

  10 GB of ram DDR3

  650W PSU

  If its my motherboard what motherboard will u recomanded stay that fits my case, GPU, ram and processor

  THX in advance (im french sory for bad English)

  Hello again @nitrox,

  Unfortunately, I can't make a specific recommendation on a motherboard. I can however advise you to make sure that the motherboard that you buy not if you are going to use the same case is a form of plant uATZ and if you want to use the graphics card you bought ensure you that the motheboard has PCIe 3.0 expanstion slots. You'll also shop for a new processor and RAM probably as well. Shop and you can find packages where a motherboard, processor and RAM are all included.

  I hope this helps. Have a great day and thanks again for the display on the HP Forums.

• The new gpu in illustrator acceleration does support 750ti GTX?

  We have a brand new with a Nvidia GTX 750ti in computer, but we do not have Illustrator to recognize for GPU acceleration.

  NVIDIA GTX 750ti is supported.

  Illustrator map single GPU support with up to 2 displays connected. Could you please check if you are using more than two screens or more than one GPU card driver?