InetSendMail error question

Similar Questions

• Reporting Toolkit small error Question

  Hello

  I've created the most impressive report of LabVIEW never to my office using a trial version of the GTA and Office 2003.  I took this to my production machine and ") @# (& % (* #^ % () ^!)).  The production machine has office 2007 and a full version license of the GTA.  Both machines have LabVIEW 8.6.0.  I read all the stuff on these errors and something about class and the dll and whatnot.  So my quick question is: instead of match versions of Microsoft Office, such as recommended, can I just rewrite from scratch the VI that creates more impressive LabVIEW report this world on the production machine to create the same effect?

  I'm not sure what it was, but I have relinked all the GTA Subvi on my real machine and it seems to work very well.  Thanks for the reply.

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!

• operating system error question

  everytime I turn on my laptop it says operating system not found, but when I again turn off the system and make it on, her without saying anything, how to avoid the "question of operating system error? Help me, it will be dangerous for my system? I got to know after installing microsoft office 2010, this error is coming, so help me

  Hi Gaby,.

  Thanks for posting your question in the Microsoft Community Forums.

  I understand from the description of the problem that you receive an operating system not found error message on the Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  This problem may occur if one or more of the following conditions are met:

  a. the basic input/output system (BIOS) does not detect the hard drive.

  b. the hard disk is damaged.

  c. sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  Note Some third-party programs or alteration of the disk can damage an MBR.

  d. an incompatible partition is marked as Active.

  e. a partition which contains the MBR is no longer active.

  Try these methods.

  Method 1

  I suggest that you update the basic input/output system (BIOS) to the last version by contacting the manufacturer of your motherboard or computer and check if it works.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Method 2

  If the previous step fails, then I suggest that you perform repair system on the computer and check if it works.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Slide numbering error - question 8 of Captivate

  I've never met before, but the blade on numbering issues says "Question 14 of 15" instead of "Question 1 of 2".

  This is slide #24 so I don't know where she gets 14 of either. When I check the next 5 slides in Captivate, it is OK, but as soon as I publish in HtML format or view HTML of Captivate, the error occurs.

  I don't see where to change this value. It is a question of verification of knowledge and is not marked even if it matters.

  I replaced the value with the text to correct it, but what is the cause?

  Any ideas?

  Thank you!

  Sherry

  Check the Panel Advanced Interaction (F9), pribablt you marked interactive

  objects.

• BlackBerry Smartphones with Blackberry world App error questions (80002)

  Its been a while since I updated my blackberry torch from 7.0 to 7.1 and after the update, everything seems to work fine except the AppWorld. Whenever I try to open Appworld it says it needs a Blackberry, I would update and then the error message "Blackberry I have failed to install. Please try again later (80002) plus". It will not update via WiFi or after several reboots.

  BIS is essential in your phone model! You should consult your telephone service provider

  you are new to the BlackBerry smartphone?

• ACS 5.1 13030 GANYMEDE + authentication error Question

  Hi all

  I am trying to set up a new server GANYMEDE + and am trying to update all configurations of our network to point to the new server devices.  Everything is fine looking up now, but on the ACS monitoring tool, two of our switches are constantly spamming '13030 request authentication GANYMEDE + lack a username' error.  The network admin group have no problem is authenticating with these two switches and they confirm that it is not trying to connect.  Does anyone know if ACS monitor will show any sauce to the IP addresses of these applications?

  If you click on the detail in your authentication error message, you should be able to find the 'Remote-address' field, which should tell you the remote IP address.

  If you haven't seen an IP in the address 'remote' field, you may need to check the console port / switch to see if something is connected to, what could cause the problem.

• DS4800: Not fatal error - question

  Hello

  According to the http://communities.vmware.com/thread/188611, I get "DS4800: information about the recoverable error reported during the execution of the integration table script" when you do a Recovery Plan test (fire drill).

  My DS4800 has no username (for example, the DS4800) and no password defined.  So I do not enter a username or password as part of the configuration of the SRM.

  I understand that LUN with a particular naming convention, i.e. 'srm_snapshot_something' are necessary to be implemented on other storage systems to enable successful recovery plan testing.

  What is the proper naming convention to be used with the DS4800?

  What documents are VMware can provide in the essays that took place to allow the DS4800 to certify on the compatibility matrix?

  Thank you

  Dave

  You will need a drive hard physics that is not part of a raid (table) for each Flashcopy. No configuration required - you need to be careful how you layout your LUNS to meet this restriction.

• PL/SQL execution error Question

  Hi Experts,
  It's the SQL procedure I remove a set number of order that are closed
  
  CREATE OR REPLACE PROCEDURE closed_test1 (varchar tabname, v_rowcount_int certain NUMBER)
  is
  v_sql varchar2 (4000);
  Start
  v_sql: =' delete ' | tabname |' College where exists (select order_nbr from the cl closed_order where fac.internal_order_id = cl.order_nbr)';
  immediately run v_sql;
  v_rowcount_int: = number of lines sql %;
  dbms_output.put_line (v_rowcount_int |) ("' deleted rows");
  commit;
  end;
  /
  
  I use an ETL tool to display the number of deleted rows, so I had to create an output parameter and awarded for the number of rows sql %
  
  When I run
  
  Declare
  number of v_rowndel;
  exec closed_test1 ('COST_TRANS_TABLE', v_rowndel);
  
  I get this error message
  ERROR at line 3:
  ORA-06550: line 3, column 57:
  PLS-00103: encountered the symbol "end-of-file" when awaits an of the
  Next:
  := ; not null default characters
  
  I don't understand what the problem is! Is it because I don't have an exit statement, but the sql statement is interlooped
  
  Any help is apprct in advance
  
  Thank you
  AJ

  It's the way you need to call the procedure.

  DECLARE
    v_rowndel   NUMBER;
  BEGIN
    closed_test1 ( 'COST_TRANS_TABLE', v_rowndel);
    DBMS_OUTPUT.PUT_LINE ('v_rowndel = ' || v_rowndel);
  END;
  

  If you use a tool, then turn on dbms_output.
  If execution of sqlplus and then SET SERVEROUPUT on.

  G.

• ASA VPN IPSec: MTU or CFG error Question?

  Hello

  I have a strange problem... If I created a tunnel IPSec the ASA vs, it goes up but doesn't work if the package + / less 150 bytes... case of exceeded the size of the packets, the ASA didn't send to client IPSec; The size is related to the type of configured tunnels:

  VPNclient Installer	ping-f-l xxx
  IPSec over TCP	152
  IPSEC over UDP	123
  No transportation Tunnelling	115

  Debug icmp report always ping request and response but with packet sniffing on vlan outside don't see a response packet when I try with higher values than those appearing:

  ping 'small':
  
      22   3.748396   x.x.x.x   192.168.y.y   ESP   ESP  (SPI=0x7106d9e3) <- ping request
  
      23   3.748884   192.168.y.y   x.x.x.x  ESP   ESP (SPI=0x05d0db4a) <- ping reply
  ping 'big':
  
      27   2.981950   x.x.x.x   192.168.y.y   ESP   ESP(SPI=0x7106d9e3) <- ping request missing ping reply!
  

  The problem occurs with any Protocol (TCP, UDP, ICMP) and checking the configuration with other ASA found no differences.

  The SAA is a 5505 with fw 8.0 (4) and IPSec microcode CNlite-MC-IPSECm-HAND-2, 05.

  Thank you

  Arturo.

  This is much like the following bug:

  CSCsu26649    Big packages removed with enable configured ip-comp

  Can you confirm that you have 'enable ip-comp' in your config vpn file? If so, that que desactiver turn off and you should be ok.

  Better yet, go to 8.0 (5).

  HTH

  Herbert

• Error error question 0x0000001e blue screen

  Hello

  I have a client who has been doing this BSOD recently, a few times now.

  0x0000001E
  worker_thread_returned_at_bad_irql

  I downloaded the minidump files here - http://sdrv.ms/ZGtK3S

  Thanks for any help!

  The results were not conclusive.
  However...
  McAfee is a common cause of BSOD.
  I suggest this be deleted and replaced by Microsoft Security Essentials at LEAST FOR TEST!

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

  Run a file system check to verify and repair the operating system files
  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success.
  Let us know the results of the report at the end.

  Read here for more information
  http://support.Microsoft.com/kb/929833

• error code 0 x 80240036 & 0x8024400A trying to get windows updates after new hardrive installed

  XP media Center Edition 2005 w/sp2, AMD Athlon 64 x 2 dual - core, Norton 360 5.0.

  Problem: When to access windows updates in the menu programs, explicit or a custom process, 0x8024400A error message is returned.  If to access updates the menu windows programs, then select "'get the new update of micorsoft today' error message 0 x 80240036 is returned.»

  Installed new hardrive, HP recovory disc, update IE 8.  Could not get Windows upadates above error messages.  Research MS site and installed fix 50362 and 50389.  STIL not luck.  Tried to manually download the sp3, but was first prompted to install Kb893803 (windows install 3.1 v2) and he did.  Download sp3 for office and installed computers went to restart to complete that now put my system in restart cycle crash mode.  With access to the safe mode, I uninstalled sp3 and now the boots normally.  Always to sp2 and can not get the updates of windows.

  • Can not completely install sp3 manually or through windows update.
  • Unable to get an update of windows.

  The other post:

  A 0x8024400a error question.  I installed new hardrive, recorvery disk it's IE 8 and still not get the updates.  Tried to download SP3 manually, but was prompted to install first kb893803 (windows install 3.1 v2) that I did with success.  Downloaded sp3 manually, and installed.  However to restart to complete the installation, the system goes into a loop of reboot cycle.  I have to go in safe mode, uninstall sp3.  I did some research and tried "difficulty his ' #50362, 50389 # and #50597 with no luck.

  Hi techmenot,

  Have you seen the following thread, it of on the same issue and has a possible solution.  Please take a look here.

  I hope this helps!

• Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

  Original title: Windows Recovery Error Question

  Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

  As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

  "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

  Is it possible to fix this? Any help would be greatly appreciated.

  Hello

  I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

  Otherwise I suggest you to contact the computer manufacturer for help.

• QString Param passing curl - C++, type the question?

  What I try to do

  Pass a QString to a C++ method. The method is effective QML.

  My Code

  applicationui.cpp

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  #include 
  
  #include 
  #include 
  
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::system;
  //new to text message
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      qml->setContextProperty("_app", this);
      // set created root object as a scene
      app->setScene(root);
  }
  
  void ApplicationUI::routeQuery(QString query)
  {
       CURL *curl;
        CURLcode res;
  
        curl = curl_easy_init();
        if(curl){
          curl_easy_setopt(curl, CURLOPT_URL, "http://google.com/search?q="+query);
          /* example.com is redirected, so we tell libcurl to follow redirection */
          curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1L);
  
          /* Perform the request, res will get the return code */
          res = curl_easy_perform(curl);
          qDebug() << res;
          qDebug() << "making query";
  
          /* Check for errors */
          if(res != CURLE_OK)
            fprintf(stderr, "curl_easy_perform() failed: %s\n",
                    curl_easy_strerror(res));
        }
          /* always cleanup */
          curl_easy_cleanup(curl);
  }
  

  applicationui. HPP

  // Default empty project template
  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb { namespace cascades { class Application; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() {}
      Q_INVOKABLE void routeQuery(QString query);
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  hand. QML

  import bb.cascades 1.2
  import bb.system 1.2
  
  Page{
  Container{
  layout: StackLayout{
      orientation: LayoutOrientation.TopToBottom
  }TextField{   id: userQuery   text: ""   hintText: "Enter your search..."}
  Button{
       text: "Route"
       onClicked: {
           _app.routeQuery(userQuery.text);
        }
       }
  
  }
  }
  

  Errors / question

  The issue is the line where I spend the "query" in the url for google. Here's what says the error:

  cannot pass objects of type trivially uncopyable ' class const QString "by «...» »

  

  Notes
  - QString - BBDOC

  - Integration of QML/C++ - BBDOC

  - Example of C++ Curl Simple HTTP (curl.haxx.se)

  Been stuck on this day. Please help if you can get this to work.

  

  Hello

  Libcurl is probably waiting for style C UTF8 string Qt strings are UTF16

  This product code QString:

  "http://google.com/search?q=" + query
  

  Try this conversion:

  curl_easy_setopt(curl, CURLOPT_URL, ("http://google.com/search?q=" + query).toUtf8().constData());
  

  . toUtf8() converts QString QByteArray UTF8.

  . constData() returns const char *.

• BB10 WebWorks Debug Error - Please enter a valid application id

  Need help to solve a WebWorks BB10 issue when debugging.

  Packaging error question

  The command line, I ran the command standard packing

  bbwp [location of project].zip -d -o [locationofoutput]
  

  Resulting in:

  [INFO]       Populating application source
  [INFO]       Parsing config.xml
  [INFO]       Error: Please enter a valid application id
  

  Here is my file config.xml, I'm actually building the sample bbUI.js

  
  http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets" version="1.0.2">
    App name
    A sample description
    My Name
    
    
    
      
    
    
    http://chart.apis.google.com" subdomains="true" />
    
    
    
    
    
    
    
    
  
  

  issue of token bbwp. Properties & debug
   

  Also... I know in the previous SDK WebWorks, you edit bbwp.properties and add a line pointing to the location of your debugging token.

  Question:

  • Where is the bbwp.properties file in the new SDK? Where can I specify my symbolic debug location?

  Thank you!

  Hello

  The id is an alphanumeric property of the principal element of the .  It cannot contain spaces or

  
  http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets" version="1.0.2" id="yourIDhere">
  

  You don't need to edit the bbwp.properties file.  The Debug documentation token specifies where to put the debugging token file.  To enable debugging symbolic support, simply build your application with the d flag.

  Hope that helps!