Infinite loop of the user folder...

Similar Questions

• Prevent automatic Expansion of the users folder

  It is a loss of a lot of time for me.  When opening explores, it automatically expands the users folder that I can navigate and collapse to get to where I really want to go.  How can I disable this annoying behavior?

  Go to start / computer and you will have a view that is not developed (at least mine isn't) - it shows C:\ and does not yet show the subfolders as users.  Or if you want just your own profile information, click on and it will give you just the files and folders in your profile (not developed).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• How can I make a folder available only to a user (as the user folder)?

  I moved my library files and downloads folder to another partition. To do this, I did the "Users" folder I created "userA" application folder. I moved all the folders in the library in it. Everything was fine, but after the passage of 'b' user account, I found "UserB" can access all the ' wear "s newly made of the folders in the library.

  Is there a way to "wear out" folder invites a password entry window when "userB" or other users on the same computer try to access it, just like the original user folder in the original partition doesn't? (If "UserB" tries to access "userA" s original user folder in the C drive, it displays a password entry window asked to type ' wear "s login password.)

  Thank you!

  JP-

  You can change your authorization file to allow only the folder owner read the files.  If your door-inherited certain permissions from its parent, you can open the advanced permissions dialog box to remove the legacy. See http://windows.microsoft.com/en-us/windows/what-are-permissions#1TC=windows-7 for more details.

  Note there is no defense against the directors. For example at the password prompt, if the user enters an identifier of the administrator, the authorization of your file could be modified to allow access.  Administrators have full control over the system.

• How to restore the default permissions (for example, the users folder) in windows 7?

  Dear windows users,

  Recently, I messed up the permissions of the files. What happened is that I took my laptop hard drive (win 7 64 bit system) in a USB external hard drive case. Then I get the USB into another windows office 7. I went through the users (perhaps of other files) folder in the hard disk of laptop on the desktop via a USB connection. It is very likely that the Office has changed the permissions of the files.
  I put the hard drive to my laptop, but some applications gives error like access denied messages.
  Is there a safe way to fix them? How to reset the default permissions?
  Thank you.

  BTW, have you worked with permissions of folders? Do you know what happens if permission to c:\users is messed up?

  When permissions in a subfolder in the users folder are confused so the user will not be able to run some programs, to create, modify or delete some files. The folder property affected, followed by assigning appropriate permissions, is usually sufficient to solve the problem.

• My C drive is nearly full, can I send the 'Users' folder to 'C' on another disk "D"?

  I am usiinf Windows 7 Professional, my 'C' drive is an SSD with 'only' 56 Gig. My hard drive "D" is a one terabyte with more than 900 GB of space left on it.

  My file 'Users' is 13 Gig.

  DAVID BROOKER

  I don't think you can move the Users folder, but you can disable Hibernate and move your pagefile to free space, and you can move your Documents, music, pictures and videos folders.  You can uninstall some programs, and then reinstall them using the custom option and put them on the D: drive too.

  Good luck.

• ORA-01436: CONNECT loop in the user data when the delimited string splitting by the

  I'm trying to split a string into records. The values are three characters more '-' with a limit of 12 values. The values themselves are a combination of two data, the first being two characters, a.

  The following example translates: ORA-01436: CONNECT BY a loop in the user data

  WITH
      Data(Code, Datum)
  AS
      (
       SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL
       SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL
       SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual
      )
  SELECT
      Datum,
      LEVEL,
      SUBSTR(Datum, ((LEVEL - 1) * 4) + 1, 2),
      SUBSTR(Datum, ((LEVEL - 1) * 4) + 3, 1)
  FROM
      Data
  CONNECT BY
      Code    = PRIOR Code
      AND    LEVEL    <= LENGTH(Datum) / 4;
  
  

  Remove the 'Code = Code PREREQUISITE"clause, to avoid the error, but too many records are returned, because nothing is to limit the records in their own groups.

  The following works:

  WITH
      Data(Code, Datum)
  AS
      (
       SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL
       SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL
       SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual
      )
  SELECT
      Datum,
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) A,
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 3, 1) B
  FROM
      Data,
      (SELECT LEVEL Num FROM Dual CONNECT BY LEVEL <= 12) Some
  WHERE
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) IS NOT NULL;
  
  

  What causes ORA-01436?

  Hello

  Depending on your version, you can add another condition to your CONNECT BY clause.

  It works in Oracle 11.2.0.3.0:

  SELECT

  Point of reference,

  LEVEL,

  SUBSTR (Datum, ((LEVEL-1) * 4) + 1, 2),

  SUBSTR (Datum, ((LEVEL-1) * 4) + 3, 1)

  Of

  Data

  CONNECT

  Code = Code PRIOR

  AND LEVEL<= length(datum)="">

  AND PRIOR SYS_GUID () IS NOT NULL-* ADDED *.

  ;

  Thanks for the display of the data of the sample; This is really useful!

  In addition, relational databases are designed to have 1 piece of information in each column of each row, not a list delimited by up to 12 points.  It is so basic to the design of database he called the first normal form.  You're going to solve a lot of problems even before they occur if you paste to first normal form and change the table structure to resemble the result set of this query.  (Maybe that's exactly why you're doing this query.)

• CONNECT IN a loop in the user data

  Could someone help me because I can not find a solution.

  I want to build a tree of 3 tables (parent-> children-> detail)

  Everything works fine with 2 tables, but when I add the third table I get always an error ORA: ORA-01436: CONNECT BY a loop in the user data

  CREATE TABLE nineham (organisatie_id NUMBER

  (, naam VARCHAR2 (50));

  --

  CREATE TABLE seizoenen (seizoen_id NUMBER

  organisatie_id NUMBER

  (, naam VARCHAR2 (50));

  --

  CREATE TABLE competities (competitie_id NUMBER

  seizoen_id NUMBER

  (, naam VARCHAR2 (50));

  --

  INSERT INTO nineham (organisatie_id, name) VALUES (1, 'ORGANISATIE_1');

  INSERT INTO nineham (organisatie_id, name) VALUES (2, 'ORGANISATIE_2');

  --

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (1, 1, 'SEIZOEN_1');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (2, 1, 'SEIZOEN_2');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (1, 2, 'SEIZOEN_3');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (2, 2, 'SEIZOEN_4');

  --

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (1, 1, 'COMPETITIE_1');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (2, 1, 'COMPETITIE_2');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (3, 2, 'COMPETITIE_3');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (4, 2, "COMPETITIE_4");

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (5, 2, "COMPETITIE_5");

  --

  --

  --

  SELECT LPAD (' ', LEVEL * 2, ' ') | Naam AS display

  LEVEL AS lvl

  DE)

  SELECT NULL AS parent

  child organisatie_id

  naam

  To nineham

  UNION ALL

  SELECT organisatie_id AS parent

  child seizoen_id

  naam

  OF seizoenen

  UNION ALL

  Seizoen_id SELECT parent

  Child AS NULL

  naam

  OF competities

  )

  START WITH parent IS NULL

  CONNECT BY PRIOR child = parent

  ;

  Hello

  When you perform a CONNECT BY query, you must have an identifier unique to each child.  You use numbers that are unique to each table, but are no longer unique when you UNION the paintings together.  When the query finds children 1, the fact that average organisatie_id = 1, or does that mean seizoen_id = 1, or does this mean competetite_id = 1?

  Etbin suggested you change data.  Which can be difficult; It might not even be possible.  In addition, you must make sure that the new IDS are unique.  When you assign advent = 10 to a node, for example, you must be sure that 10 is not an organisatie_id.

  Here is another solution that is guarranted to generate unique IDS, without changing the actual tables:

  SELECT LPAD (' ', LEVEL * 2, ' ') | Naam AS display

  LEVEL AS lvl

  DE)

  SELECT NULL AS parent

  organisatie_id AS child

  , 1 AS the level of

  naam

  To nineham

  UNION ALL

  SELECT organisatie_id AS parent

  seizoen_id AS child

  , 2 AS the level of

  naam

  OF seizoenen

  UNION ALL

  SELECT seizoen_id AS parent

  Child AS NULL

  , 3 AS the level of

  naam

  OF competities

  )

  START WITH parent IS NULL

  AND level = 1

  CONNECT BY PRIOR child = parent

  AND layer = FIRST + 1

  ;

  The composite key formed by your original ID, and the new level number is unique.

  Note that the query above is exactly what you have posted, with the addition of the lines that refer to level.

• Error: CONNECTION loop in the user data

  CONNECT IN a loop in the user data:

  Table X (sample data were actually lines 35K)

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  07 vv353 7872 0919 FV982 78282

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  01 ab122 0001 1982 AU123 99393

  05 cg899 6728 32322 IKL020 65252

  07 w353 0919 8282 FV982 78282

  now I need to order these data comparing the values of the line to old_id new_id for each combination of code, person, case

  need output like below

  Table X

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  01 ab122 0001 1982 AU123 99393

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  05 cg899 6728 32322 IKL020 65252

  07 vv353 7872 0919 FV982 78282

  07 w353 0919 8282 FV982 78282

  to get to what I use:

  -Request-

  Select * from table_x

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY old_id new_id PRIOR =

  AND code = code PRIOR

  AND case EARLIER case =

  PER person = person PREREQUISITE

  -Request-

  works very well with the sample data, but the problem is when executed with actual table that has 35K record...

  Cause: The condition specified in a CONNECT BY clause caused a loop in the application, where the next record to be selected is a descendant of itself. When this happens, it may be no end to the query.

  Action: Check the CONNECT BY clause and remove the circular reference.

  Thank you

  AK

  Hello

  CONNECT_BY_ISCYCLE is a pseudo-column that you can use in a query of CONNECTION BY NOCYCLE.  It is separated from the CONNECT BY clause.

  Try this:

  Select code, "BREAKS", person

  , SYS_CONNECT_BY_PATH (old_id, "/") AS path

  from table_x

  where CONNECT_BY_ISCYCLE = 1

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY NOCYCLE Old_id = new_id PRIOR

  AND code = code PRIOR

  AND 'CASE' = 'BOX' PRIOR

  PER person = person PREREQUISITE

  ;

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• ORA-01436: CONNECT loop in the user data

  Hello
  
  I have a simple bit of SQL out details on HR supervisor strings in Oracle EBS:
  

  SELECT     LPAD(' ', (LEVEL - 1) * 10, ' ') || person_id level_label
           , LEVEL
           , description
        FROM applsys.fnd_user u
           , hr.per_all_assignments_f h
       WHERE u.employee_id = h.person_id
  START WITH SYSDATE BETWEEN effective_start_date AND effective_end_date
         AND person_id = :personid
  CONNECT BY PRIOR person_id = supervisor_id
         AND SYSDATE BETWEEN effective_start_date AND effective_end_date

  It will return data normally without problems - e.g. data dummy below - looks very good. The names and made up person_ids.
  

  LEVEL_LABEL                    LEVEL     DESCRIPTION
  000001                         1     Person Person 1
            000002               2     Harry Marry
                      000003          3     John Smith
                                000004     4     Jenna Jones
                                000005     4     Her Name
                                000006     4     His Name
                                000007     4     Joseph Coat
                                000008     4     Les Miserables
                      000009          3     Mister Smith
                      000010          3     Miss Jones
                      000011          3     Andrew And
                                000012     4     Claire So
                                000013     4     Hilary Hi
            000014               2     Jenny Jones
                      000015          3     Amanda Mandy
                                000016     4     James Jim
                                000017     4     William Wonder
                                000018     4     Crazy Cat
                                000019     4     Silly Cat
                                000020     4     Tall Hill
                                000021     4     Amazing Grace
                      000022          3     Lovely Mountain
                                000023     4     Joyous Spring
                                000024     4     Anonymous Name
                                000025     4     Brian Binky

  However, if I try for an another person_id, for which a user receives an error in one part of the Oracle EBS, I get this error:
  
  ORA-01436: CONNECT loop in the user data
  
  I'm guessing there is a loop of supervisor happening somewhere, but I don't know how to determine where it might happen.
  
  I was wondering if there is any way I can change the SQL code to be able to work out where the loop can be, as there are about 50 people involved in Ministry to this user and I have been through all their records and can not see a loop to look through the Oracle HR screens.
  
  I know it's a 'big ask' to ask a vague question about some oracle SQL, so apologies for that.
  
  Any advice much appreciated.
  
  Thank you

  Hello

  To see loops, do something like this:

  SELECT     SYS_CONNECT_BY_PATH (person_id, '/')     AS path
  FROM      applsys.fnd_user           u
  ,      hr.per_all_assignments_f      h
  WHERE      u.employee_id           = h.person_id
  AND     CONNECT_BY_ISCYCLE     = 1
  CONNECT BY NOCYCLE     PRIOR person_id = supervisor_id
       AND           SYSDATE      BETWEEN     effective_start_date
                           AND      effective_end_date
  ;
  

  If you would care to post CREATE TABLE and instructions INSERT for some samples, so I could test it.

  Note there is no START WITH clause.

  If, for example, Jones is the architect of Scott, Scott is the main contractor of Adams and Adams is the architect of Jones (much to other lines is not involved in a loop), then displays 3 rows of output, such as

  PATH
  ---------------------
  Jones/Scott/Adams
  Scott/Adams/Jones
  Adams/Jones/Scott
  

  Moreover, all the same CONNECT BY queries on these tables can be a lot faster if you've made the join and date filtering in a separate subquery first:

  WITH     combined_data     AS
  (
       SELECT     person_id, supervisor_id
       FROM      applsys.fnd_user           u
       ,      hr.per_all_assignments_f      h
       WHERE      u.employee_id      = h.person_id
       AND     SYSDATE      BETWEEN     effective_start_date
                      AND      effective_end_date
  )
  SELECT     SYS_CONNECT_BY_PATH (person_id, '/')     AS path
  FROM     combined_data
  WHERE     CONNECT_BY_ISCYCLE     = 1
  CONNECT BY NOCYCLE     PRIOR person_id = supervisor_id
  ;
  

• ORA-01436: CONNECT loop in the user data, but CONNECT_BY_ISCYCLE is equal to ZERO all the

  Hello
  
  When I run query below, it always throws the below error:

  SELECT connect_by_root code AS code_root,
      CODE,
      CODE_DESC,
      UP_CODE 
    FROM DI_CODE_LEVEL
    WHERE TYPE_CODE='SP'
      CONNECT BY PRIOR CODE=UP_CODE;
  
  ORA-01436: CONNECT BY loop in user data
  01436. 00000 -  "CONNECT BY loop in user data"

  But when I use NOCLYCLE and CONNECT_BY_ISCYCLE to see which line is in question.
  It shows nothing, which means CONNECT_BY_ISCYCLE = ZERO for all rows.

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      ) 
  where ISCYCLE>0;

  Is there another reason that sql would lift ORA-01436?
  If there is a loop, then will the combination of NOCYCLE, CONNECT_BY_ISCYCLE will show?
  
  Thank you

  Hello

  Apparently, one or more of the "SP" lines are at the origin of the problem.
  The WHERE clause is applied after the CONNECT BY is finished, saying:

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  where ISCYCLE>0;
  

  is equivalent to

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  WHERE    TYPE_CODE = 'SP'
  AND     ISCYCLE   > 0;
  

  To see where the loop occurs, you must include the lines where type_code = "SP".

  When you debug "ORA-01436: CONNECT IN a loop in the user data ', view SYS_CONNECT_BY_PATH (uk,...), where the United Kingdom is a unique key. That will tell you much more than just the root information. You might want this:

  SELECT  connect_by_root code                AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE
  ,     SYS_CONNECCT_BY_PATH (code, '/')     AS path          -- For debugging
  ,       CONNECT_BY_ISCYCLE                AS ISCYCLE     -- For debugging
  FROM      DI_CODE_LEVEL
  -- WHERE TYPE_CODE = 'SP'     -- Commented out for debugging
  where      ISCYCLE > 0          -- For debugging
  CONNECT BY NOCYCLE      PRIOR CODE = UP_CODE
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
  Explain how you get these results from these data.
  Always tell what version of Oracle you are using.

• Why is the user folder so big?

  When I check the size of my file user (only one on this computer), Get Info indicates that it contains 147 concerts.  When I read the information on each of the 11 folders inside my user folder, they add only up to 75 concerts.  Why is there a difference of 72 concert between the file and the amount of its content?

  Thank you

  Ian

  Which computer?

• Replace the user folder?

  I had a drive hard failure and then spent two days time Machine * (restore failed over and over again) before finally giving the place and moved manually on my supported up to data (ugh).

  I moved on my user folder, but it is not recognized in the system (users and groups), just the new preferences (another name) that I created when you install a new copy of El Capitan (former user folder is to El Capitan).

  I don't want to create a new user with the same name as my old username in the fear of it being deleted (tons of data that took forever to copy).

  Someone at - it experience with this situation?

  Advice would be appreciated - nearly three days of no productivity... I've gotta get back operational.

  Thank you in advance,

  Rick...

  Move this folder to one location other than/Users /, then create a new user. The items in the folder /Users/ are regular folders; the actual list of accounts is stored elsewhere.

  (143664)

• migration assistant for only the user folder

  I'm helping a student who left a Time Machine backup College but suffered a hard disk failure in his MacBook Pro here. We can't clone or make a backup hard drive TM or run the recovery partition. All we could do was to copy the user on an external hard drive folder.

  Apple replace the drive under warranty and installation of system software. When we reboot the machine that is repaired, we will be able to use setup assistant/migration assistant to transfer the folder to the user as it will not be recognized as another backup Mac or MC? Otherwise, what is the best way to get it on the laptop and recognized as a user it?

  (She needs to work on its data before returning to the University is not an option to wait until she is back with his backup TM)

  As far as I know the Migration can be done with just the folder of the user. What I would say is that you copy the text of the drive backed up by a folder. In other words, open the two folders of Documents and copy the text from the backup folder of Documents to the Documents from the computer folder. This, for everything except the library. Most of what is in the library will be restored as the computer is reconfigured and the applications are put back in place.

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.

• What is the AppData folder in the user folder?

  Thank you

  The Roaming folder is used for the data is copied from/to a server when the user logs on power in a domain environment. This allows the user to access their data from any computer in the domain.

  Folders are used to them for data specific to a particular computer. LocalLow is used by programs that run with a low integrity, such as Internet Explorer in protected mode. This is a security feature that prevents the file system is accessible from the Internet.

  http://TechNet.Microsoft.com/en-us/library/cc766489 (WS.10) .aspx