MP3 player is not recognized

I have a creative zen vision and can't get it to connect.
Have used the installation disc, had windows XP service Pack2, Windows media player with all add ons and still can not get connected.

It works on the old computer. How can I get the driver to work if that is the problem?

Hello

It's delicate, you´re may be in the wrong forum because if you have already installed everything and it doesn´t work then you should maybe check out some creative forums. I Don t want to offend you or something, but here we are in a pure toshiba forum. :)

Maybe we could find a solution today?
If you describe more precisely what you´ve did, then we could find a way...

Welcome them

Tags: Toshiba

Similar Questions

  • MP3 player is not recognized by the computer, the unit will not charge and transfer of content said to connect the unit.

    Original tile: Mp3 player will not charge

    All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device.  It will not load and transfer of content said to connect the unit and it is already plugged.  The player will load on another computer.  The mouse that is connected works very well. Help!

    Hi LaurajmWR,

    Good to know that you are able to resolve the issue and thank you for sharing the information.

  • MP3 player is not recognized by the computer.

    Original title: MP3 problem

    Whenever I connect my mp3 player to my laptop my computer does not recognize the device. It allows, but now he's not even appear on my media player either. Was there a change of setting or what continues? i; ve tried restoreing my computer, but who did not have any good either.

    Hello

    1. The question is limited to the MP3 player?
    2. What is the number and the model of the MP3 player?
    3. You receive an error message when you connect the MP3 player to the computer?
    4. Other devices not detected when connect you to the computer?

    Please provide more information on the issue so that we can better help you.

    In the meantime, you can run the fix provided in the link below and check if that helps resolve the issue.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • RCA Pearl mp3 player is not recognized on USB port

    When I turn on my mp3 player Pearl rca the screen says memory exceeded remove some files.  When I plug the mp3 player into my usb slot my computer does not recognize why the camera?

    Hello

    1. If it works much earlier?

    2 have you made changes on the computer before this problem?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the fixit article fixit from Microsoft at the following address and check if it helps.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Run the hardware and devices Troubleshooter and check if that helps.

    Open the hardware and devices Troubleshooter:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 3:

    Try the steps in the following Microsoft article and check if it helps.

    Tips for solving problems of USB devices:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Note: it also applies to Windows 7.

    And also try to plug the MP3 into another computer and see if it helps.

    Hope the information is useful.

  • Pyrus MP3 player is not recognized in Windows 7.

    Original title; Pyrus mp3 player.

    My computer does not recognize my pyrus mp3 player, driver error. How can I fix it? I did a driver update and my computer says I have the latest update.

    Hello

    1. What is the exact error message that you receive?

    2. the device was working fine before?

    3. have you made changes on your computer before this problem?

    You can run the hardware and devices Troubleshooter & check if the problem persists:

    Open the hardware and devices Troubleshooter

    Hope the helps of information.

  • Windows media player is not recognizing my mp3 creative zem m300 player

    Windows media player is not recognizing my zen m300 mp3 player creative I have two of these one with each firmware version. I uninstalled and reinstalled computer driver recognizes the drive as a separate disk drive will play even files but will not recognize the device if I can sync the music. clearly, it's a matter of media player I can see im not the first to have the problem and nobody has really found a solution. is it possible to go back to an older version of media player to make it work.

    To clarify, the device presents itself as a removable drive in the start menu > Compute, correct?
    If so, can you get the files back that way?

    Were you able to sync previously?

  • MP3 player does not appear. Where can I find?

    I have music in my Media Player I want to download to an MP3 player. I plug it, and nothing happens. My computer does not recognize that something new is here. I can't find it when I search. Help!

    Hello

    1. What is the brand and model of your computer and the MP3 player?

    2 did you change on your computer before this problem?

    3. MP3 player recognized in the Device Manager?

    Open the Device Manager

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/MP3-player-does-not-show-up-where-do-i-find-it/a9b93480-01F6-45c9-8fc9-09c44def623b

    Run the fix of the article and see if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    You can also connect the MP3 player to a different USB Port and see if it works.

    You can also connect MP3 player on another computer and see if it helps.

  • Digital mp3 player is not detected on the computer.

    Original title: my phone dosnt recognize my drive digital mp3. When I plug it into the usb port do not get an icon. so I can't load music can help you

    MY LAPTOP DOES NOT RECOGNIZE MY MP3 DIGITAL PLAYER. WHEN I PLUG IT INTO THE USB PORT I DON'T GET THE USUAL ICON. SO I CAN'T DOWNLOAD MUSIC ON IT. CAN YOU HELP ME PLEASE

    Hello

    Thanks for posting your question in the Microsoft Community Forums!

    If I understand the question, digital mp3 player is not detected on the computer. Please let me know if this is not correct.

    Before I continue with the troubleshooting steps I may need a few more details to better understand the issue.
    1. what operating system do you use?
    2. do you receive any error messages?
    3. are you having the same problem with other USB devices?
    4. have you tried plugging the machine into the other USB Ports?
    5. did you of recent changes on the computer before this problem?
    6. What is the serial number and model of the MP3 player?
    Method 1:
    We will first try to plug in other USB Ports and on another computer to make sure that there is no problem with the digital mp3 player.
    Method 2:
    If the first method does not resolve the problem, run the hardware and devices Troubleshooter and check if it helps.
    Hardware devices do not work or are not detected in Windows
    For more information, please see the link.
    Respond with the required information so that we can help you solve the problem.
  • Sony MP3 player will not sync on PC

    SONY MP3 PLAYER

    MY MP3 SONY READER WILL NOT SYNC TO MY COMPUTER

    Hello

    Please do not type in capital letters as it is difficult to read and considered to be shouting.

    ------------------------------------------------------------------------------------------------------

    Here's to an MP3 player and not all apply to an iPod (if an iPod please let us know.)

    Set the MP3 MTP Mode for synchronization of WMP11/12 - mode MSC to treat the MP3 as a reader.

    ----------------------------------------------------------------------------

    If necessary: (Vista references also apply to Windows 7)

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Make sure that Windows is updated appropriately that there have been several USB updates.

    1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed
    in this case. Mine was h: I added a device that took H: and the player stopped. So I put
    Back to H: and the other device to J: and everything worked again. If necessary start - type in the search box->
    Disk management is top - right click it - RUN AS ADMIN

    Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and
    delete files and update the firmware.

    If no joy follow these steps:

    You may need a powered hub. (all the USB ports on your computer are not powered, often
    only 2)

    Try these:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Here, your devices are the MP3 player.

    Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure in XP, Windows 7 is the same, except that we need to clear the specific
    devices if it is present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as
    Although all USB devices that you previously used. Run Options and check the 1st three choices to
    see if one is there.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    -------------------------------------------------------------------

    If the above does not work (and it should be considered the preparatory work).

    This works for any MP3 player when the USB stack is not corrupted:

    1 player to delete and restart computer - switch to MTP mode on your MP3 player

    Regardless of what brand of MP3 you have

    1. check this Just In Case

    http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

    2. does not present (web page as reference)

    http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

    In XP: Start - RUN - CMD

    In Vista/Windows 7: (Do this way!)

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    Copy and paste this command into windows XP or Vista/Windows 7 CMD - press enter

    NET local service localgroup administrators / add

    3. then follow:

    http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

    I hope that your MP3 now works.

    -------------------------------------------------------------------

    Only if necessary:

    Try a system restore before what happened:

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    I hope this helps.
    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Books on my mp3 player audio not say they are already in MP3 and will not sync

    I try to add the 17 CD to an audio book to my mp3 player, but windows media player says that it is already on my mp3 player, AND IT IS NOT. Thus, it will not synchronize this CD on my MP3 player.  Any ideas or suggestions?

    Delete the mp3 player and try again

  • Some MP3 files are not recognized by Fuze

    I have a 4 GB Fuze v1. I got this as a Christmas present and want to use it to listen to Audio and video podcasts. I updated the Firmware from V01.01.22A. My problem with him that some MP3 files will not be recognized. MP3 files are on the card of 2 GB external so I, MPT/MSC mode does not matter. For example, "NPR: CarTalk Podcast" in format mp3 will not play but "The Index Investing Show" podcast also in mp3 format will play very well. I first noticed it with downloaded mp3 files iTunes, I do not think it is an iTunes related issue because the same podcast downloaded directly from the NPR site will also fail. No idea what is the problem? Here is the link to the download of the podcast (use the button download MP3/4): http://www.npr.org/rss/podcast/podcast_detail.php?siteId=9911203

    I solved the problem first I used Any Audio Converter to convert MP3 to MP3 with the same audio features. The file is converted to the same sheet worked! I noticed converted file was not any ID3 tag information in the original file. After playing a bit with MP3Tag software and tags removal began, I found that the offending tag has been KIND on the value of 'Podcast '. Fuze does not recognize "Podcast" in the field of the kind so he simply ignored, rather than list it under "unknown". In my view, that it is a bug. Sansa must list the MP3 files under Tote 'Unknown' when 'Genre' tag is present, but the value does not match any of the existing tags.

  • music on mp3 player will not play on a cd player

    Over the months, I downloaded music will play on laptop and car cd player, but will not play on a cd device at home.

    What wav is the correct word I use songs then play on any device, and I can mp3 player changed songs so I don't have to download the songs again, as there are a lot of songs that play on their, portable cd player and car, but not on any other device CD.

    Hello

     
    Most of the CD players support AAC, WAV file formats. However, I can't guarantee that your CD player will support these file formats. Consult the User Guide for the CD or Web site so that it supports the file formats.

    Or let us know the make a model of your CD player, I'll try to get the details for you.
     
    I hope this helps!
  • Laptop was dropped, now my CD player is not recognized

    I dropped my laptop for a long time and about a week later, I tried to burn a CD and I realized that my cd drive is not recognized by my laptop. The Player opens and closes smoothly, but it is not just recognized. When I go to 'my computer' the drive does not appear. It is as if she is invisible.

    Any ideas? Something broke? How can it be solved?

    Thank you

    Good news!  This particular unit requires no that you remove the access panel.  On the Panel, there is a screw that is labeled with a small image of a CD (top view, not the one with the disks stacked one on the other).  All you have to do is remove the screws and all of the optical disk should slide right out.

  • My Sansa MP3 player does not connect to the Windows Media Player, I have several of them and all but 1 do not connect to Media Player

    I used the same cable on other sansa and it works very well.  It is a 4 GB player, I see if I go to my computer. Thanks for any help.

    Hi SteveBrooks,

    1. were you able to use the drive before with no problems?

    2 you get messages or error codes when you try to synchronize?

    Given that the drive is detected by the computer, you can check if the sync settings are correct in Windows media player.

    Set up a device to sync in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

    For more information, please visit the links below

    Windows Media Player sync: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

    You can also view the following support Sansa link and check if it helps:

    Sansa player not recognized by the computer

    http://KB.SanDisk.com/app/answers/detail/A_ID/42/~/Sansa-player-not-recognized-by-the-computer

    Hope this information is useful.

  • Windows media player is not recognized loaded CDs

    Media Player does not recognize the CD loading.

    Perhaps the following links would offer a few ideas:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

Maybe you are looking for

  • AppStore Mac do not charge pages

    AppStore Mac do not charge the pages, this page remains white and the logo in the Center, mac app store is connected to the internet

  • Cannot be used at all on Windows XP SP3, IE8

    Hello The latest version of what I used was 6.1.999.130. I have this problem for a month. When I try to connect using my old MSN login it says "sorry, we did not recognize your connection details". The latest version crashes after launch. Windows XP

  • DVD player works not-Windows 8.1

    Hello I have a craving 700-060-ea, new machine (1 week) upgraded to Windows 8 to 8.1. Problem: Can't get the DVD player to operate (in all honesty, do not know if you are working in Windows 8, such as updated day 1). Device Manager gives me the follo

  • Function key does not work on Satellite A50-109

    The Funtion Key (Fn) does not work on my computerAnd I don't know how to solve this problem It worked once (with all the F1, F2 etc.), but it does not work now PLS HELP ME! Thank youBart

  • Need help with the installer of widows

    Hello, I need help please. I've been downlading an update for my Kodak 5000 series printer. In the middle of the installation, my power went out due to a storm. When I got back to complete the update, the update will not settle. The installer gave me