Info Express baloon
Hello
under windows you can find on the Ethernet connection system tray, when its connected willingness presents information connected it will be we watch as error indications.
I can able to generate news. using labview...? I think it must be very useful for data acquisition.
Please find the attachment.
Wow this LabVIEW library is very cool!
Tags: NI Software
Similar Questions
-
No F4 with El Capitan...
One to remember the good old days, when we could hit F4, get your notes, get a calculator, a Celsius Fahrenheit/meter cm and kilometer to miles Exchange program?
Yes. Now, F4 does not work and I lost a lot of info, info I need and you can't get.
How can I recover the old notes I had?
As well, I'm bored kilometer in Exchange for miles, the Celsius to Fahrenheit etc, etc, etc.
I need help!
Yes, El Capitan is nice, but we could get before opinion delete just good useful applications...
HI there MagicM.
So you're looking for the dashboard or the Launchpad for quick access of the Widgets or applications. If you're talking about the scoreboard which was a separate space in previous versions of Mac OS X, you may need to activate in your system preferences. The keyboard shortcut for it's F12 when activated:
OS X El Capitan: Get info Express with dashboard
If you're talking about the dashboard, check out the info in the following article:
OS X El Capitan: use Launchpad display and open applications
Dashboard does not have a shortcut by default, but you can certainly be set in system preferences > keyboard > shortcuts > Launchpad & Dock > show Launchpad. I have done this and characterized by the F4 key and it worked perfectly.
OS X El Capitan: use global keyboard shortcuts
Choose the Apple menu > System Preferences, click keyboard, and then click shortcut.
Select the action in the list you want to change.
Double-click the current shortcut, and then press the new key combination to use.
You cannot use each type of key (for example, a letter) more than once in a combination of keys.
Quit and then restart all the apps that you use for the new keyboard shortcut to take effect.
If you assign a keyboard shortcut that already exists for another command or another application, your new shortcut won't work. Find the menu command that he uses, and then reassign the keyboard shortcut for this element.
To disable a shortcut, uncheck the box next to its description in the list.
If you want to return their original combinations of all the shortcuts, click default settings.
Thank you for using communities of Apple Support, let us know how it goes!
-
(Redirected) What readers to buy for my OptiPlex 755 video card
I just bought a Dell OptiPlex 755 of Micomp and he has a really bad video card. I wonder what are my options here
My computer (from newegg.com) record:
Operating system: Windows 7 Home Premium / processor Type: Core 2 Duo / GPU/VGA Type: Intel GMA 3100 / memory capacity: 8 GB DDR2 / HDD: 250 GB / speed CPU: 3.00 Ghz
Learn more about the DELL Optiplex/C2D / 3 GHz
Model
- Brand
- REFERENCE DELL
- Model
- OptiPlex/C2D / 3 GHz
Info Express
- Type
- Computers in business desktop & Workstations
- Form factor
- Desktop
- Its use
- Company
- Operating system
- Windows 7 Home Premium
CENTRAL PROCESSING UNIT
- Type of processor
- Core 2 Duo
- Processor speed
- 3.0 GHz
Graphics
- GPU/VGA type
- Intel GMA 3100
Memory
- Memory capacity
- 8 GB DDR2
Hard drive
- HARD DRIVE
- 250 GB
Optical drive
- Optical drive type
- DVD-ROM
Display
- Screen size
- No screen
Audio
- Audio chipset
- Integrated
Communications
- LAN Chipset
- Integrated
- LAN speed
- 10/100/1000Mbps
Front panel ports
- Front USB
- 2
- Front Audio ports
- 2
Rear panel ports
- COM
- 1
- LPT
- 1
- Video ports
- 1 VGA PORT
- Rear USB
- 6
- RJ45
- 1 port
- Rear Audio ports
- 1 x headphone jack, 1 x Microphone, 1 x line
Manufacturer warranty
- Parts
- 1 YEAR
- Labor
- 1 YEAR
Loading...I need a 1 GB video card to run gmod. y at - it good cards that I can use
Better to post this thread in the Forum video Desktop, here:
http://en.community.Dell.com/forums/3515.aspx
Bev.
-
Inspiron n4010 virtual wireless adapter shows 'unplugged', does not connect
I've scoured the web looking for a solution to this problem, found a similar question posted here, but no solution... en.Community.Dell.com/.../20263886
My friend brought me his Inspiron n4010 notebook help saying until a few months ago, he used to connect to the wifi with no problems. All of a sudden, it wouldn't show all wireless networks available no matter where she went - its wireless home network, work network and neighborhood of free wifi hotspots - none would connect. Similarly, I have tried with my home wireless network and my network wireless office without result. Connect LAN2 (for Boradcom virtual Wireless Adapter) this always as 'unplugged network Cable.
**********************************
INFORMATION SYSTEM
**********************************
Reference Dell system detects shows the system as:Inspiron 14R (N4010, early 2010)
Serial number: * Let me know if you need this info)
Express service code: * Let me know if you need this info)Here are the specs of the system via system information:
Host name: LAURA-PC
Name of the operating system: Microsoft Windows 7 Home Premium
OS version: 6.1.7601 Service Pack 1 Build 7601
OS manufacturer: Microsoft Corporation
OS configuration: Standalone Workstation
OS Build type: multiprocessor Free
Registered owner: *.
Registered organization: Microsoft
Product ID: *.
Original installation date: 09/09/2010, 19:22:06
Starting system: 02/02/2015, 12:13:39
System manufacturer: Dell Inc..
System model: Inspiron N4010
Type of system: PC x 64
Processor (s): 1 processor installed.
[01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
El ~ 1065 Mhz
BIOS version: Dell Inc. A02, 21/04/2010
Windows directory: C:\Windows
System directory: C:\Windows\system32
Starting device: \Device\HarddiskVolume2
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-08:00) Pacific (U.S. & Canada)
Total physical memory: 3 893 MB
Available physical memory: 2 376 MB
Virtual memory: Max size: MB 7 783
Virtual memory: available: 4 938 MB
Virtual memory: in use: 2 845 MB
Office (s) swap file: C:\pagefile.sys
Domain: workgroup
Logon server: \\LAURA-PC
Corrections: 268 fixes installed.
[01]: KB2849697
[02]: KB2849696
[03]: KB2841134
[04]: KB2670838
[05]: KB971033
[06]: KB2305420
[07]: KB2393802
[08]: KB2425227
[09]: KB2475792
[10]: KB2476490
[11]: KB2479628
[12]: KB2479943
[13]: KB2484033
[14]: KB2485376
[15]: KB2487426
[16]: KB2488113
[17]: KB2491683
[18]: KB2492386
[19]: KB2497640
[20]: KB2503658
[21]: KB2503665
[22]: KB2505438
[23]: KB2506014
[24]: KB2506212
[25]: KB2506223
[26]: KB2506928
[27]: KB2507618
[28]: KB2507938
[29]: KB2508272
[30]: KB2508429
[31]: KB2509553
[32]: KB2510531
[33]: KB2511250
[34]: KB2511455
[35]: KB2515325
[36]: KB2522422
[37]: KB2524375
[38]: KB2525694
[39]: KB2529073
[40]: KB2530548
[41]: KB2532531
[42]: KB2533552
[43]: KB2533623
[44]: KB2534366
[45]: KB2536275
[46]: KB2536276
[47]: KB2541014
[48]: KB2544893
[49]: KB2545698
[50]: KB2547666
[51]: KB2552343
[52]: KB2555917
[53]: KB2556532
[54]: KB2559049
[55]: KB2560656
[56]: KB2562937
[57]: KB2563227
[58]: KB2563894
[59]: KB2564958
[60]: KB2567053
[61]: KB2567680
[62]: KB2570791
[63]: KB2570947
[64]: KB2579686
[65]: KB2584146
[66]: KB2585542
[67]: KB2586448
[68]: KB2588516
[69]: KB2603229
[70]: KB2604115
[71]: KB2607712
[72]: KB2616676
[73]: KB2617657
[74]: KB2618444
[75]: KB2618451
[76]: KB2619339
[77]: KB2620704
[78]: KB2620712
[79]: KB2621440
[80]: KB2631813
[81]: KB2633952
[82]: KB2639308
[83]: KB2639417
[84]: KB2640148
[85]: KB2641653
[86]: KB2641690
[87]: KB2644615
[88]: KB2645640
[89]: KB2647516
[90]: KB2647518
[91]: KB2647753
[92]: KB2653956
[93]: KB2654428
[94]: KB2655992
[95]: KB2656356
[96]: KB2656411
[97]: KB2658846
[98]: KB2659262
[99]: KB2660075
[100]: KB2660465
[101]: KB2660649
[102]: KB2661254
[103]: KB2665364
[104]: KB2667402
[105]: KB2676562
[106]: KB2677070
[107]: KB2679255
[108]: KB2685811
[109]: KB2685813
[110]: KB2685939
[111]: KB2688338
[112]: KB2690533
[113]: KB2691442
[114]: KB2695962
[115]: KB2698365
[116]: KB2699779
[117]: KB2705219
[118]: KB2709162
[119]: KB2709630
[120]: KB2709715
[121]: KB2712808
[122]: KB2718523
[123]: KB2718704
[124]: KB2719857
[125]: KB2719985
[126]: KB2724197
[127]: KB2726535
[128]: KB2727528
[129]: KB2729094
[130]: KB2729452
[131]: KB2731771
[132]: KB2731847
[133]: KB2732059
[134]: KB2732487
[135]: KB2732500
[136]: KB2736233
[137]: KB2736422
[138]: KB2739159
[139]: KB2741355
[140]: KB2742599
[141]: KB2743555
[142]: KB2749655
[143]: KB2750841
[144]: KB2753842
[145]: KB2756822
[146]: KB2756921
[147]: KB2757638
[148]: KB2758857
[149]: KB2761217
[150]: KB2761226
[151]: KB2762895
[152]: KB2763523
[153]: KB2769369
[154]: KB2770660
[155]: KB2773072
[156]: KB2778344
[157]: KB2778930
[158]: KB2779030
[159]: KB2779562
[160]: KB2785220
[161]: KB2786081
[162]: KB2786400
[163]: KB2789645
[164]: KB2790113
[165]: KB2790655
[166]: KB2791765
[167]: KB2798162
[168]: KB2799494
[169]: KB2799926
[170]: KB2800095
[171]: KB2803821
[172]: KB2804579
[173]: KB2807986
[174]: KB2808679
[175]: KB2808735
[176]: KB2813170
[177]: KB2813347
[178]: KB2813430
[179]: KB2813956
[180]: KB2820197
[181]: KB2820331
[182]: KB2829361
[183]: KB2830290
[184]: KB2832414
[185]: KB2833946
[186]: KB2834140
[187]: KB2834886
[188]: KB2835361
[189]: KB2835364
[190]: KB2836502
[191]: KB2836943
[192]: KB2839894
[193]: KB2840149
[194]: KB2840631
[195]: KB2843630
[196]: KB2844286
[197]: KB2845187
[198]: KB2845690
[199]: KB2846960
[200]: KB2847077
[201]: KB2847311
[202]: KB2847927
[203]: KB2849470
[204]: KB2850851
[205]: KB2852386
[206]: KB2853952
[207]: KB2859537
[208]: KB2861191
[209]: KB2861698
[210]: KB2861855
[211]: KB2862152
[212]: KB2862330
[213]: KB2862335
[214]: KB2862966
[215]: KB2862973
[216]: KB2863058
[217]: KB2863240
[218]: KB2864058
[219]: KB2864202
[220]: KB2868038
[221]: KB2868116
[222]: KB2868623
[223]: KB2868626
[224]: KB2868725
[225]: KB2872339
[226]: KB2875783
[227]: KB2876284
[228]: KB2876315
[229]: KB2876331
[230]: KB2882822
[231]: KB2883150
[232]: KB2884256
[233]: KB2887069
[234]: KB2888049
[235]: KB2891804
[236]: KB2892074
[237]: KB2893294
[238]: KB2893519
[239]: KB2893984
[240]: KB2898785
[241]: KB2898857
[242]: KB2900986
[243]: KB2901112
[244]: KB2904266
[245]: KB2908783
[246]
Network adapters: 3 interconnect installed.
[01]: Atheros AR8152 PCI - E Fast Ethernet Controller
Name of the connection: connection to the Local network
DHCP enabled: Yes
DHCP server: 192.168.1.254
IP addresses
[01]: 192.168.1.167
[02]: b 87:4 d 76 fe80::b535:b8ea:8
[03]: 2602:304:5692:7719:741's: b075:fb08:ce0
[04]: b 87:4 d 76 2602:304:5692:7719:b535:b8ea:8
[02]: device Bluetooth (personal area network)
Name of the connection: Bluetooth network connection
Status: Media disconnected
[03]: Virtual Broadcom wireless adapter
Connection name: Local 2 network connection
Status: Media disconnected***************************************************************
TROUBLESHOOTING STEPS TAKEN UP TO NOW:
***************************************************************1. check that the wireless is enabled via the F2 key - it's (but turn it off seems to have no effect).
2. check that the wireless is enabled in the BIOS - I. BIOS version is A02, I have not tried so far. I prefer to do it as a last resort, unless that specific need.
BIOS: Wireless: enabled
Wireless (Switch) / (Hotkey): all the
Internal Bluetooth: enabled
Internal WLAN: enabled
Internal WWAN: enabled3. the Device Manager shows wireless network devices as missing from all the drivers? N °
Device Manager showed the following details: virtual map of Broadcom, provider wireless: Broadcom, driver Date: 01-21-2010, driver Version: 5.60.48 - 35, digital signer: MS Windows HW Compatible Publisher4 are the network updated wireless drivers? With the help of Dell system detects, automatic detection of the system, he showed a driver update available listed as "Dell Wireless WLAN 1501 half Mini-Card (4313bgn) Driver. When running Setup, it gave an error "no compatible hardware found...". »
5. I ran ipconfig/all. Here is the read:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:\users\administrator>ipconfig/all
Windows IP configuration
Host Name . . . . . . . . . . . . : **********
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Ethernet connection to the network space 2 card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Broadcom virtual wireless adapter
Physical address.... : 02-50-F2-00-00-01
DHCP active...: Yes
Autoconfiguration enabled...: YesBluetooth network connection Ethernet card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Device Bluetooth (personal area network)
Physical address.... : C4-46-19-EF-96-56
DHCP active...: Yes
Autoconfiguration enabled...: YesEthernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Atheros AR8152 PCI - E Fast Ethernet Controller
Physical address.... : B8-AC-6F-70-2F-4B
DHCP active...: Yes
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 14:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {C00AD485-0CED-4EF9-B632-033E9AFD14E9}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {CD91392E-769E-4E32-A5C2-2680FF4BBC41}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {FC8C4544-C5EC-479D-AA95-B545EBDCD8C1}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #6
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesC:\users\administrator >
6. I checked the Windows Mobility Center. Wireless 'tile' was where it should have, according to other messages I saw who were on this subject. Strangely, when I clicked on the button to launch under Dell - Radio control options, checkboxes Wi - Fi and Mobile Broadband have been unchecked and greyed out.
7. I have reset the winsock catalog and restarted the computer via the elevated command prompt (Administrator)
NET winsock reset catalog
No change in status wireless.8. I disabled the Norton firewall and Windows and anti-virus to see if wireless was somehow blocked by them. No change in status wireless.
9. I checked the Windows power plan settings to confirm that network cards did not have their power reduced. I put the adapter wireless for maximum while on battery and current performance alternative.
10. I checked the Windows Event Viewer logs > Windows Logs > system:
I've seen repeated Scriptures error spread among the many dates of "BTHUSB (Blue Tooth adapter failed in an indeterminate way, will not be used.". The driver has been unloaded. "I saw no reference to what about wireless however.
11. I tried to run Windows Update manually to see what, if any, driver updates it can find (using a network cable connection) and got the error 'cannot be updated because the Windows Update service is not started. I confirmed that he was released. I also manually stopped and restarted the service but continued to get the same error message. I kept the Windows Firewall and Norton Firewall (and antivirus) disabled in case they were interfereing with Windows Update, but no luck.
12. I ran bad/ad/spyware scans with a portable version of Spybot and also a free version of SuperAntiSpyware, analyze the results showed several adware results, that have been deleted.
13. I tried to manually configure the IP address, subnet mask and entered default gateway for IPv4 to the wireless adapter, which had been put on "obtain automatically", as it should. I also put the server DNS preferred my ISP (Comcast), then tried Google 8.8.8.8. This should have worked but the connection still showed as "cable disconnected" (why is a mistake to launch a "cable disconnected" wireless connection?)
14. just for fun, I ran the update from the Intel driver from their site (via wired), who identified the available for graphics and Chipset updates - I've updated both, but it did not help (no surprise).
15. I started Windows in Safe Mode with network - just as in normal mode, he showed the connection wireless as "cable disconnected".
I am open to any suggestions at this point. The laptop is out of warranty so prefer to avoid paid support, if in any way possible.
If you can get a hardware ID by activating / deactivating it on or turned off, it suggests itself wireless card is bad... Diagnostic tests could confirm this:
http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/
You can look in the service manual to try and reinsert the card or replace it. His work a bit longer than necessary:
An easier solution if you are uncomfortable with the material of the Assembly would be to buy a USB wireless adapter.
-
Hello
I would try the following, please provide your inputs!
I am using PowerCLI to change the Type of trigger for alarm 'Datastore Disk use %' warning and alert of 75/85 for a new watermark.
Is this possible? Any help would be really appreciated. Thank you very much!
With the current construction of PowerCLI, you cannot change triggers yet, but you can use the API.
Something like that
$alarmName = "Datastore disk usage"$newYellow = 80$newRed = 85$alarm = Get-AlarmDefinition -Name $alarmName $spec = New-Object VMware.Vim.AlarmSpec$spec.Enabled = $alarm.ExtensionData.Info.Enabled$spec.Description = $alarm.ExtensionData.Info.Description$spec.Name = $alarm.ExtensionData.Info.Name$spec.Expression = $alarm.ExtensionData.Info.Expression$spec.Expression.Expression[0].Yellow = $newYellow * 100$spec.Expression.Expression[0].Red = $newRed * 100 $alarm.ExtensionData.ReconfigureAlarm($spec)
-
The change is triggered in VCenter via PowerCLI
Good afternoon everyone, I am trying to automate the change of an alarm with VCenter 5 trigger. Currently when users use 75% or more the storage on the local hard disk, I get an alarm for "Datastore Disk use. I want to change the warning from 75% to 85% and the alert from 85% to 90%. I have been using VSphere PowerCLI for many tasks for adding and configuring the hosts and their storage, networks, dns, etc... So, I understand the basics. I can't understand how to do something else then get the name of the alarm. Any help would be appreciated.
Hello, ThatMattGuy-
You can change an element of the alarm using the API. You should be able to use the following to update the caveat - and the percentages of trigger alert at 85% and 90% respectively by using:
## get the .NET View object for the Alarm of the given name$viewAlarmToUpdate = Get-View -Id (Get-AlarmDefinition -Name "Datastore usage on disk").Id ## copy the existing AlarmInfo item from the current alarm definition$specNewAlarmInfo = $viewAlarmToUpdate.Info ## update the two desired properties on the MetricAlarmExpression (http://pubs.vmware.com/vsphere-50/index.jsp?topic=/com.vmware.wssdk.apiref.doc_50/vim.alarm.MetricAlarmExpression.html)$specNewAlarmInfo.Expression.Expression[0].yellow = 8500$specNewAlarmInfo.Expression.Expression[0].red = 9000 ## reconfigure the alarm with the new threshold values$viewAlarmToUpdate.ReconfigureAlarm($specNewAlarmInfo)
It takes AlarmInfo to the definition of existing alarm, updates the two values you mentioned and the uses of the method ReconfigureAlarm() of the alarm.
And, then to display the new values, you check the definition of alarm triggers tab in vCenter, updating the view on the object data and echoing, as:
## update the View object$viewAlarmToUpdate.UpdateViewData("Info")## display new values for the alarm$viewAlarmToUpdate.Info.Expression.Expression[0]
How do I?
-
I can see a value of properties, but I can't get the value
I'm trying to access the threshold values for alarm
$alarmDef = get-AlarmDefinition "Datastore use."
$alarmDef.extensiondata.expression.expression.
results in:
Operator: isAbove
Type: Datastore
Metric: VMware.Vim.PerfMetricId
Yellow: 8500
YellowInterval:
Red: 9000
RedInterval:
DynamicType:
DynamicProperty:So I can see the yellow (8500) and Red (9000) values from above. so, I'm going
$alarmDef.extensiondata.expression.expression.yellow
but she returns nothing?
The correct path is
$alarmDef.extensiondata.Info.expression.expression
but I guess that it was just a typo.
The Expression property points to an array, even if there is only 1 expression, you will have to use an index.
Like this
$alarmDef.extensiondata.Info.expression.expression [0]. Yellow
-
can anyone run this script?
Hi all
in order to proceed to a reconfiguration of the alarm, I need to get metricId of an alarm by default,
the problem is, then from a previous test I accidentally deleted some of these alert, so I have to manually recreate but I can't find the metricId that match.
So, in order to help me, can someone run this script:
$Name = "unable to connect to the storage.
$alarmMgr = get-view AlarmManager
$alarms = $alarmMgr.GetAlarm ($null)
$alarms | %{
$alarm = get-view $_
If ($alarm.Info.Name - eq $Name) {}
"Write-Host-object' * $alarm.Info.Name:"-nonewline
Write to $alarm.Info.Name
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.CounterId:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.CounterId
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.Instance:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.Instance
}
}
First of all, as is the case, a second time with $Name = "host error.
and one last time with $Name = 'high-availability Cluster error. "
The result of these commands will help me a lot to get my alarm
Thanks in advance to anyone who can help me
Here you go (host)
and (cluster HA)
____________
Blog: LucD notes
Twitter: lucd22
-
Hello
I am a beginner with PowerCLI but with the help of www.lucd.info and the VI Api, I am writing a script to automate the configuration of my alarm for vCenter.
My script is intended to:
-remove all measures for all alerts
-rename some alerts with a prefix to notice the
-Configure the same alerts with special values that we use in our structure
the structure of the script is as follows (I wasn't able to join the script to this topic when posting...):
#listing I target all alerts
...
$alarmMgr = get-view AlarmManager
$alarms = $alarmMgr.GetAlarm ($null)
$alarms | %{
+ $alarm = get-view $_ +.
+ $spec = New-Object VMware.Vim.AlarmSpec #Ecrasement of the old shares (SNMP,...) +.
+ $spec. Action = New-Object VMware.Vim.GroupAlarmAction #Copie of the unchanged characteristics +.
+ $spec. Expression = $alarm.Info.Expression +.
+ $spec. Definition of = $alarm.Info.Setting +.
+ $spec. Name = $alarm.Info.Name +.
+ $spec. Enabled = $alarm.Info.Enabled +.
+ $spec. Description = $alarm.Info.Description +.
+ +
+ If ($tgtAlarmName - contains $alarm.Info.Name) {+
+ $spec. Name = 'RBS'$alarm.Info.Name
+ $alarmTrigger = new-Object VMware.Vim.AlarmTriggeringAction +.
+ $alarmTrigger.Action = new-Object VMware.Vim.SendEmailAction +.
+ $alarmTrigger.Action.toList = $cibleMail +.
+ $alarmTrigger.Action.CcList = $cibleMailCopie +.
+ $alarmTrigger.Action.Subject = $objetMail$spec. Name
+ $alarmTrigger.Action.Body = "alert vCenter \n\n problem with the monitor:"$spec. "" Name'etat\n of the son check \n\n ' +.
+ +
+ #here certain conditions block the forward different configuration +.
+ ......+
+ $spec. Action.Action = $alarmTrigger
+ }+
+ $alarm. ReconfigureAlarm ($spec) +.
}
The unit test worked fine, but when I run my script with the values of wright for the final test, I always get an error:
"Exception calling 'ReconfigureAlarm' with '1' or the arguments: ' not initialized: vim.alarm.alarmAction [] action..." »
line 203 of my script, and that occur the same number of times, the number of alarms I in vCenter.
As the declaration of the VMware.Vim.AlarmSpec object is not in a block of air conditioning, I can't understand why I get these error
As anyone thoughts on that?
PS: Excuse my bad English, if one of my sentences was not quite clear, is fell free to re - ask
Likewise, my comments on the script is in french, but if you need I can translate some lines
Of course, I've PM - ed you my e-mail address.
____________
Blog: LucD notes
Twitter: lucd22
-
change the setting of the alarm (action)
Hello:
I need to change the settings for my existing alarm by script. I need add SNMP specific alarm action (I know how to filter by name).
Can anyone help me please with it?
Thank you
qwert
I tested with an alarm which has 1 action (send an email) and the adapted below script seems to work.
$entity = Get-View (Get-Folder -Name "Datacenters").ID $alarmMgr = get-view AlarmManager $tgtAlarmName = "Test Alarm" $alarms = $alarmMgr.GetAlarm($null) $alarms | % { $alarm = Get-View $_ if($alarm.Info.Name -eq $tgtAlarmName){ $spec = New-Object VMware.Vim.AlarmSpec $spec.Expression = $alarm.Info.Expression $spec.Setting = $alarm.Info.Setting $spec.Name = $alarm.Info.Name $spec.Enabled = $alarm.Info.Enabled $spec.Description = $alarm.Info.Description $spec.Action = New-Object VMware.Vim.GroupAlarmAction $action = New-Object VMware.Vim.AlarmTriggeringAction $action.Action = New-Object VMware.Vim.SendSNMPAction $trans = New-Object VMware.Vim.AlarmTriggeringActionTransitionSpec $trans.StartState = "yellow" $trans.FinalState = "red" $action.TransitionSpecs += $trans $spec.Action.Action = $alarm.Info.Action.Action $spec.Action.Action += $action $alarm.ReconfigureAlarm($spec) } }
Note 1: you need not do the LoadWithPartialName more since 1.5 VITK
Note 2: for the AlarmManager Get-view has a direct pointer. No need to go through ServiceInstance more.
Note3: first I copy the existing stock of $alarm.Info.Action and then I add the new $action
-
Get alarms and change default values
My question is two really, I was just read the previous thread http://communities.vmware.com/thread/230786?tstart=0 and I was wondering how to get the list of existing alarms, after have stuck in the SDK for awhile, I thought I would ask experts.
I see how they relate to the CROWD, but can not put it in the code.
Also, is there a way to modify each alarm 5 by default that are created to add an action to send a snmp trap?
Thank you
Alan Renouf
The first part of your question is easy.
The following script will display just the name of the alarm, but you can find all the properties in the object of the alarm ($t variable).
$serviceInstance = get-view ServiceInstance $alarmMgr = get-view $serviceInstance.Content.alarmManager $alarms = $alarmMgr.GetAlarm($null) $alarms | %{ $t = Get-View -Id $_ Write-Host $t.Info.Name }
For the 2nd part of the question, yes you can change the preset alarms (as you can from the VIC).
You'd use the ReconfigureAlarm method to do this.
$predefined = "Host connection state","Host CPU Usage","Host Memory Usage","Virtual Machine CPU Usage","Virtual Machine Memory Usage" $serviceInstance = get-view ServiceInstance $alarmMgr = get-view $serviceInstance.Content.alarmManager $alarms = $alarmMgr.GetAlarm($null) $alarms | % { $alarm = Get-View -Id $_ if($predefined -contains $alarm.Info.Name){ $spec = New-Object VMware.Vim.AlarmSpec $spec.Action = New-Object VMware.Vim.GroupAlarmAction $spec.action.action = @(New-Object VMware.Vim.AlarmTriggeringAction) $spec.Action.Action[0].action = New-Object VMware.Vim.SendSNMPAction $spec.Action.Action[0].Green2yellow = $true $spec.Action.Action[0].Red2yellow = $false $spec.Action.Action[0].Yellow2green = $false $spec.Action.Action[0].Yellow2red = $true $spec.Name = $alarm.Info.Name $spec.Description = $alarm.Info.Description $spec.Expression = $alarm.Info.Expression $spec.Enabled = $alarm.Info.Enabled $spec.Setting = $alarm.Info.Setting $alarm.ReconfigureAlarm($spec) } }
Alarms, listed in $predefined, will now send an SNMP trap when the State goes from green to yellow and when the State goes from yellow to red.
-
Helllo,
I am running Application Express on my PC. I have loaded OracleXE, and then updated on-demand Express 3.0.3.00.08. I am running Oracle Database 10g Express. When I speak of 'UTL_FILE' package, I get a "'UTL_FILE' must be declared ORA-06550:"error. " Anyone have any suggestions on how to solve this problem. Thanks in advance.
Sharon
PC request Info Express.
Construction product: 3.0.1.00.08 database Version information
Compatibility of the schema: 2007.05.25 Oracle Database 10 g Express Edition Release 10.2.0.1.0 - product
Last hour DDL: 2008-09-24 13:45:58 PL/SQL Release 10.2.0.1.0 - ProductionI guess that, in the 10th, the UTL_FILE package is not granted EXECUTE to the PUBLIC.
You must log in as a user of the SYSTEM, and run:
GRANT EXECUTE ON utl_file to
; where
is the schema of analysis associated with the workspace. Twelve, you'll need to:
1 create a directory pointing to the folder object.
2 grant read and/or write privileges on the directory you want to access it as. Bye,.
Flavio-----------------------------------------
http://www.oraclequirks.com -
Where can I find the Outlook Express Mail Server name Info
original title; Outlook Express Mail Server name Info
How to check or enter the name of the server for Outlook Express? I get an error message indicating that I entered the server name correctly but I don't know how to correct it. My mail will never be out fo. I have photos I am trying to send to Snapfish and they will not download.
I've never used Snapfish, but I don't see where this has nothing to do with Outlook Express, an e-mail client. While glancing at their website, it seems that you download photos from your computer as you would to Photobucket or SkyDrive, you do not send by e-mail their. You should not need to use any e-mail program to achieve this.Snapfish - Download Photos
http://www.Snapfish.com/Snapfish/uploadphotosIf for any reason you wish to configure OE to e-mail, you need get the correct account settings of your mail server and then follow the instructions here.Setting up email in Outlook Express servers:
http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx -
victory settin up an otl ex? We ask: what is your pop3 and cupw, sumthin like that. HAV an otl how to find or what are the t answers?
Hello
Welcome to the Microsoft community.
I'm happy to help you with your concern.
I understand that you ask for the POP and SMTP settings for Outlook.com account for you to be able to set it up in Outlook Express.
Please apply the following settings:
Incoming (POP3) Server
Address of the server: pop3.live.com
Port: 995
SSL encryption: Yes
Outgoing (SMTP) Server
Address of the server: smtp.live.com
Port: 25 (or 587 if 25 is blocked)
Authentication: Yes
TLS or SSL Secure encrypted connection: Yes
Thank you.
-
My folder of outlook express has 2.4 GB of info, what files can I delete?
I transfer my Outlook Express to Windows live and wanted to know if I needed all the files in there, like Deleted Items.bak, Spam.dbx and others.
I delete anything until you get things moved. Messages can import dbx files and you might need the bak files. Wait until it is finished and is saved and then you can get rid of things.
Steve
Maybe you are looking for
-
I can't open Mozilla on my computer
I can't open my firefox to get my email
-
"My goal... is simple (and it was easy to implement in Appleworks). I have a simple spreadsheet with two columns. The user enters data in a context menu in the left column; Current date and time are entered in the right column. I have it works very w
-
Low graphics card Profile for HP Compaq PRO 6300 Small Form Factor
I need to buy a PC for a CAD workstation, I want a dedicated graphics card and understand that the 6300's are limited due to food being only 240 watts. I want a graphics card dedicated good to deal with this power supply. I heard that the AMD Radeon
-
Tektronix AFG3022B do not call Initialize vi resetting tool
I installed the driver from LV for a Tektronix AFG3022B signal generator, called tkafg3k. I was changing some of the examples provided and all seems well. However, I don't want to make a tool reset when I initialize the instrument... made using tkaf
-
More recent emulator ripple to not cross-domain proxy
My apologies if this question has already been answered, but I just took the time to install the last ripple emulator after much frustration with earlier versions... and now, after following these instructions to the 't', I still can't use the emulat