Information system DRAC 4/p

Similar Questions

• My HP m7580n lost its information system

  I lost my information system and now I can't use the recovery discs, say spywary PC my PC is not allowed to run on this computer too. Also, when I run a check of updates of drivers on pcpitstop it shows my computer to an ASUS instead of a HP. I've heard of a tattoo of the motherboard that may be lost, but I found no answers to that. Does anyone know how I can fix it. Thank you

  Thanks for all the info. I see now it's hp or windows which is at the origin of the restore disks do not to work, because I have so much updated. I thought that the motherboard was the only thing that was needed to keep a hp computer. I wish just that since I bought it, I wouldn't have to go through this when I update my computer to get more life out of it. They make you buy new. For now, I'll get a full copy of XP pro, which is not oem so I for several years without this problem and build my own system too. No more horses. IM starting to see the advantage of building your own model.

  Thanks for your help...

  PS. It was a good article.

• Cannot access my information system

  Hello.

  I have a laptop Acer Aspire which worked OK until a month ago.
  Started with each time that I turned to my computer that has started making the automatic updates that took about 30 minutes. And then when I turn back on it tells me that the updates were not properly installed.
  SO I tried to access Windows Update to check and then realized that it does not open. I click on the symbol for windows update and a window appears and closes before you click on anything.
  Same thing happens when I try to access my Information System, click on the symbol and a window appears and closes.
  What can I do? !!

  Toni

  Hello AntoniaC,

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the Advanced Boot Options menu (or beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!

  If your system is clean, then run this analysis of Auditor system in SafeMode below files:

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. click on continue or provide credentials admin if prompted.

  3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete. This will replace missing/corrupted system with the right files from Microsoft files.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I was looking in my information system; software environment; system drivers and I noticed that many have stopped status. How can I determine which are to be started? How can I start them?

  I was looking in my information system; software environment; system drivers and I noticed that many have stopped status.  How can I determine which are to be started?  How can I start them?

  Hello

  · Do you see a problem with your computer?

  You can check the links which has more information on the information system: Description of Windows XP system information (Msinfo32.exe) tool: http://support.microsoft.com/kb/308549

• Information system may not collect information. Unable to access Windows Management Instrumentation software. Management of Windows files can be moved or missing.

  Information system.
  Popular management files moved or missing.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• I tried to install the information system on my laptop, but am getting error that I should install NET FRAMEWORK 4, so am having problem with it

  am having a problem with WINDOWS NET FRAMEWORK 4, SO I NEED HELP on IT

  Hello

  ·         What type of information system seeking to install on Vista?

  By default, you can run msinfo32 to obtain information on the system. Is that what you are using when you receive the error message on .NET Framework?

  See: how to use the command-line tool information system (MSINFO32) switches

  http://support.Microsoft.com/kb/300887

  You can also try to download and install .net framework 4 from the link below

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9cfb2d51-5ff4-4491-b0e5-b386f32c0992&displaylang=en

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Information system error, does not

  When I click on windows error reporting, the description will not appear, and after a few minutes I saw the title bar information system (no response). Do you think that there is something bad about it?

  Hello

  Information system can take a long time to come until then to use these methods, and then try again.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The display of file space of total Information System Page after changing virtual memory allocation?

  I thought that I understood that I could set up a file.sys page on any available partition on Windows, if I wished, for example, to create more virtual memory or move a file to another drive. However the changes I make to my computer are not appearing in the system information, after a reboot - why is - this?

  I have successfully configured internal auxiliary training to take on a pagefile.sys when you use the system advanced settings in the computer file system properties. Page created on the auxiliary drive single file memory is equal to once and a half the size of the physical memory of the computer.

  As I had created a larger file of the Page on the auxiliary drive, I then decided to reduce the Page file on the boot up to 300 MB drive. When I did make changes, I clicked on the set then OK and then I rebooted the entire computer.

  After restarting the computer, I tried to check system information for a summary of the changes I had made to the file Page and virtual memory space and I was disappointed to see that the pagefile on the auxiliary drive does not show upward. Information system had just recorded space Page MB 300 in C:\pagefile.sys file, and there is no trace of the larger Page file that I created on the auxiliary drive. How is that?

  If I go back to the virtual memory window in advanced system settings, it clearly shows I changed two files Page. Yet in Information System shows only the boot Page file drive. How is that?

  I always use Internet Explorer with only 300 MB Page file space, and it works really faster than the default virtual memory allocation, however the system soon slows down after opening about 5 instances of Internet Explorer and the system starts asking to close application windows down to save memory. So why does the system not switch to use the Page file on the auxiliary drive?

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to report this query in TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/en-us/home

  Be sure to visit Microsoft Community, if you have any questions in the future.

• Information system may not collect information. Unable to connect to this computer. Check that the Winmgmt service is running.

  Information system may not collect information.

  Unable to connect to this computer. Check that the Winmgmt service is running.

  My problem has been set by following the steps:

  1. click on start-> type CMD-> right click on CMD of the result-> click on run as administrator

  2. type the command net stop winmgmt and press enter

  3. Open command prompt and click on start and type system32-> open the folder system32 in the result pane.

  4. in the system32 folder open Wbem and locate the repository folder

  5. right click on the repository, then click Rename

  6. change the name of the drop to Repository.old folder

  7. switch back to the command prompt and type net start winmgmt and press ENTER to run command

  8. close all windows and restart the computer and try to Msinfor32.

• "Information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. »

  Original title:

  MS Info

  I need to send a file Ms Info to Wb tech support so that they can help me with the game on steam download. Whenever they open the file it says it gives the following message "information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. "I tried to open it too and had the same error message how can I send a file not corrupted for them?

  Information MS cannot open this file.

  They should use Notepad to open the file when it is a txt file.

  Another way to create a portable system information file is to select the hotkey Win + R, type msinfo32 , and press ENTER . Click file, Save and name the file. This method creates a file with an extension of nfo file. Perhaps the recipient expects the file in this format.

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Information system says that I am running Windows 8.1 but Windows mean I'm under 8.

  Original title: information system

  My information system says I am running windows 8.1 but windows is saying I'm under 8.
  When I go to the store to see if it will be updated it tells me that there was a problem.
  I don't want windows 10.

  My information system I am running windows 8. 1, but windows means I'm under 8.
  When I go to the store to see if it will be updated it tells me that there was a problem.
  I don't want windows 10.

  Hello

  With a system 8.1:

  When you right-click on the taskbar and select system, which is where it tells you that you use 8.1

  More information required as to where you're looking and get it in.

  

  See you soon.

• How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

  How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

  I downloaded 5.7.1, he asked for a serial number, and now everything is OK. Thanks for the help.

• LR creative cloud crashed when you select Edition > Preferences, help > information system and other menus. Latest version CC and 10 Windows running

  Having a problem where LR crashes all the time when you select Preferences/information system and other options of the menu. I updated to the latest version and also removed preference files so that they are rebuilt.

  All solutions?

  Thank you

  Gary

  Hi garybi,

  • Please, go to the Windows, where Device Manager, expand display adapters.
  • Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.
  • Lightroom farm and go back to Device Manager and activate the graphic card.
  • Open Lightroom and then work in Lightroom and check if it works very well.

  Kind regards

  Tanuj

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.