information system failed to load. "can not access windows... management software »

Similar Questions

• Database to the top, but can not access Enterprise Manager or APEX Login

  Newbie here so sorry if it's simple.
  I have already searched the forums and tried to do what is recommended and still have a problem.
  
  
  I am running Enterprise 10.2 on a virtual machine from windows XP. It has been working well for some time.
  I restarted the VM without stopping the DB. When it has restarted the database is in place and I can run queries using SQLplus. However I can't load all services via a web page, for example. Enterprise Manager, APEX connection... Also, I can't make a connection using SQL Developer. These were all working well before.
  
  I already searched these forums and some people have had similar problems when running 10.2 on a virtual machine and it's the listener who has a problem...
  I deleted and reinstalled the listener with Net Configuration Wizard and restarted the DB, but that did not help.
  
  Here are the results when I use tnsping. Any advice would be really appreciated! Thank you!
  
  C:\Documents and Settings\XPMUser > tnsping orcl
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.3.0 - Production 18-APR-2
  010 01:07:18
  
  Copyright (c) 1997, 2006, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos)
  (t) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
  OK (20 ms)

  >
  I set the ORACLE_HOME, but I still get the same error 3 when I try to start the DBconsole.

  I don't know what you mean by which OS is the owner of the tree of Oracle software. It's a virtual machine with a single user XPMuser.

  Thanks for the help underway...
  >

  Maybe it's time that you re-set up DB control.

  emca -config dbcontrol db -repos recreate
  

  Kind regards
  Phiri

• My hard drive has left an old system to a new system and now I can not activate Windows.

  Cannot download the drivers to activate Windows

  I spent two days now trying to get a computer at work, I've built. I use new parts other than my used hard drive previously. I was not able to install the drivers for my network so I'm stuck right with the activation screen when I connect. If I do not activate and then I get kicked out and have to log in again. I cannot connect to the network to turn on obviouly and when I call them they say my ID intillation in does not correct and they don't recognize it as a valid product. I then remove my hard drive and put it back in the old machine and as if by magic, it works fine after activation. How am I supposed to install my drivers so I can activate if I can't go to my screen to install? This is the second time that this happens, and I really not prefer to buy a new windows disk for something that already works.

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Adobe products not respecting window management software.

  Is there a way to enable this? I use Divvy to adjust the size of the apps on my Mac (MBP 2015, OS X 10.11), but Adobe apps don't seem to be able to be sized and positioned in this way. Has anyone been successful with this?

  Hi statecollege1234,

  I tried the same thing on the Mac and Divvy does not allow to resize the window of Adobe applications.

  Unfortunately, Adobe uses non standard windows that do not meet programmatic resizing.

  Kind regards

  Tanuj

• why I can't access windows or downloads updates

  The last time my computer was able to connect to update was on Thursday, may 27.  I thought that this could be a problem with IE8, I am running Windows XP SP3.  I deleted the update received on 27 downloaded Firefox and still can not access windows update the following is the message of firefox when you try to access the Windows FIX IT

  Unable to connect

  Firefox can't establish a connection to the server download.microsoft.com

  * The site may be temporarily unavailable or too busy. Try again in a few
  moments.

  * If you are unable to load any pages, check your computer's network
  connection.

  * If your computer or network is protected by a firewall or proxy, make sure that
  that Firefox is permitted to access the Web.

  I tried twice today to post on the forum windows only to have IE8 back with impossible to locate the site.  I'm so compose the message this time and post on the Forum Internet Explorer as well.

  Hi 1FallenAngel,

  Firefox does not connect to the Microsoft update site. You must use internet explore for it.

  Please provide us with the error you are getting while trying to connect using internet explore. We would require the error code or error message for further investigation on the issue.

  In the meantime, you can try running internet explore in no add-on mode and try to access windows update.

  • Click theStart button, click principally made programs, on Accessories, click System Tools, and then click Internet Explorer (No Add-ons).

  If disabling all add-ons solves the problem, you can use the add-on Manager to disable all add-ons and then turn on modules only as needed. This will allow you to figure out which add-on is causing the problem.

  In Internet Explorer 8, you can disable toolbars by clicking theX on the side of the toolbar. If there are additional modules associated with the toolbar, a dialog box will be displayed where you can keep or disable the Add-ons.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Please answer in return.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Error: 303: unable to load a resource: can not access the resource file (try loosening Flash security)

  Error: 303: unable to load a resource: can not access the resource file (try loosening the Flash security settings): error #204 in shockshare.com and putlocker.com any help please?

  When I was watching a movie... There was a link, I always watched movie shockashre and putlocker.com but today, I saw this problem and don't kno how to solve

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hotmail cannot b viewed, the new computer

  I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hi GwenBright,

  1. what happens when you try to access the account? You receive messages or error codes?

  2. are you facing problems with hotmail account?

  If you are facing problems with your hotmail account, you can post your request in the Windows Live forum for assistance:

  Windows Live Support

  http://windowslivehelp.com/searchresults.aspx?query=cannot%20access%20account%20from%20New%20computer&ProductID=1

  Hope this information is useful.

• I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them

  I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them that I just want to be able to use the system restore and information system.  Thank you

  Hello

  What is the full and exact error message?

  Check if the article below or the thread will help.

  How to use restore system with Windows Management Instrumentation in Windows XP
  http://support.Microsoft.com/kb/295299
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-WMI-file-is-missing-i-am-running-Windows-XP/86242cad-ee5a-E011-8dfc-68b599b31bf5

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• InDesign on Mac Lion CS6 - cursor froze on the spot tool. Can not access other tools! Help please!

  InDesign on Mac Lion CS6 - cursor froze on the spot tool. Can not access other tools! Help please!

  I restarted CS6, and I can not yet anything the page. In the average operating system rush job ;(

  [Moved from the living room Forum to forum specific program... MOD]

  Thank you Michael. I will remember that if this happens again. In the end, it fixed itself! After an hour or two of hand frozen, I left for a while and when I got back, everything was very good! I think that there is a first time for everything!

• I can not access meus than

  OLA, had sou Brasileira. Renovei meu plano da adobe creative para students. An esta e paga mensalidade had I can not validar meus products. Simplesmente tenho para amanha submit e trabalhos I can not access meus programas. Alguem me ajude, por favor

  Hello

  Please try not to the following link Solve common Adobe Creative cloud activation of (log) and questions (disconnect) disabling or error messages

  If this does not work please try following steps depending on your operating system

  Mac t/s

  (1) close adobe every process in activity monitor (creative cloud sync Core CC library, ccx, services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, open finder and click on going in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to next support/adobe application and rename slstore.old and slcache to slcache.old Slstore.

  4) go to ~/Library/application support/adobe/oobe and delete the opm.db

  (5) navigate to/etc and open hosts file. Check if it has entries from adobe. If any amount of the fine, if yes replace the hosts file with a new file hosts without adobe entries

  (6) launch cc app and it should work properly

  Windows

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  (3) rename SLstore to Slstore.old to the following location c: / / program data / Adobe /.

  (4) rename SLcache in Slcache.old in the location C:\Program Files (x 86) \Common Files\Adobe more

  4) navigate to c: / / Users/username/appdata/local/adobe/oobe and rename Opm.db to opm.old

  5) navigate to c: / / windows/system32/drivers/etc/and the hosts file opened in Notepad. IF you see an entry from Adobe it please replace this hosts file with a new hosts file that doesn't have any input from adobe. If there is no entry permit Adobe the hosts file, as it is.

  (6) run cc app and sign in.