Ini file importing visa connection problems

Similar Questions

• VI does not take into account my INI file settings

  I created a VI Labview 7.1 in 2006 on Windows XP.

  Now I wanted to use it again, under the execution engine, but now I have Windows 7 and the control panel is different.

  On my current computer should I use Windows system police 125% otherwise, I would not see stuff on my screen. This causes the police on the VI to invade other objects, and it looks messy. If I change the system fonr to 100% then the VI looks good, just I can't really use my computer for anything else to this 100% font setting.

  I have no Labview license more, so I can't edit the VI, what I can do is run the EXE in the runtime.

  I thought that I would write in my file ini VI, to compensate for the enlargement of fonts:

  FPFont = 'Arial' 7
  BDFont = 'Arial' 7
  appFont = 'Arial' 7
  dialogFont = 'Arial' 7
  systemFont = "Arial" 7

  In fact, it's what is in the ini file.

  The problem is the appearance of the VI is not performed by what I put in the ini file. 7 at the end of the lines was supposed to set the font to be small (size 7), but it does nothing.

  What's wrong? How to solve this problem?

  What is the name of the ini file and where is it located?

  The first line in the ini file must contain the program name in the square brackets. What is the name of the application?

• problem updating the ini file ini file

  I get the ip address of the user's input and to replace the old IP in the .ini to the last ip address file but the problem is when a user enter the IP and I write it in my ini file it does not at once, but if I do it twise in calling the same function of my command button twise then my ini file is updated , it is the strage iniwrite function returnes success although on first attempt. I checked with breakpoint, but when I do it twise, then it is done, please guide me in detail, I am really amayzed by this strange behavior...

  

  I already gave you the exact order of the functions in my previous message!

  Ini file tool generates an object in memory that allows you to store and locate the values. This object can be filled in reading a file on the disk; Similarly, it can be saved to a file on disk. This is the very first operation and the last to perform if you want a picture to date of your values on the disk. There are three layers to consider:

  1. The file on the disk
  
  
  2. The IniText object in memory
  
  
  3. The variables specific to your program

  With this in mind, the right order to update the file on the disk so that it reflects the value that your variables have in memory is:

  Ini_New create the object in memory

  Ini_ReadFromFile fill it with the contents of the disc

  Ini_get('sendmail_from') read of the idebugprogramnode2 memory in your program variables

  Here tou can update the values of program

  Ini_Put update the object of memory with the contents of your variables

  Ini_WriteToFile save everything on the disc

  Memory Ini_Dispose clear

  As you save on disk before you call the Ini_Put functions, the disk image is not updated

• .Mp4 and .mts video files import problems

  I've updated Premiere Pro 2015.4 and now all .mp4 or .mts files import video shows only and not audio. It's as if there is no sound in the video. Nobody knows all the solutions to this problem?

  Hi Jonathanm,

  Please close Premiere Pro and clean the media cache.

  FAQ: How to clean the files hide media

  Re-launch of Premiere Pro and import your files again.

  Thank you

  Ilyes Singh

• Write the string to the ini file problem

  

  I was tring to write a string in an ini file, which should be:

  [Basic information]
  File Name=C:\\11111.doc

  but the result is:

  [Basic information]
  File Name="C:\\11111.doc.

  whence the double quote come?

  got it, thanks

• Satellite Pro A60 Wireless connection problem

  Hello

  I have a Satellite Pro A60 which was connected to our main office using a Linksys Home Wireless - G USB adapt to I can share files and also connect to our connection broadband. The main office is connected directly to a G from Linksys home wireless gateway. It worked fine then for no reason (no settings have been changed or installed software) the laptop does not connect to the desktop or the internet. The software Linksys says that it is connected to the access point, but the internet cannot be found. Even if he says that it is connected I can't get to the desktop.

  I tried to set up a dial-up connection independent for updating drivers etc, but after the normal dial tones, he says that it cannot connect to the remote computer.

  We tried everything that we think would be grateful for any ideas. Please speak slowly and distinctly also even if I know a little technical jargon computers is a language that I'm not still commonly!

  Thank you very much

  Hello

  It's really not easy to say what can be the problem. In my opinion, you must remove all the settings and adapter WLAN Device Manager. Restart the unit, reinstall the wireless card and make a WLAN configuration again.

  In my opinion, it is very important to know if the WIFI network of the device works correctly, and if you are able to share files between the laptop and our main office. If it works properly again check the settings on our front door.

  One is the problem with Notepad or another device. If someone of your friends has a WIFI at home, you can try to check the laptop WIFI functionality. On this way, you can be sure that if the problem is caused by your Satellite Pro.

  If you find a solution please let me know what the problem is.

  Good luck!

• Number of serial port configuration ini file!

  Hello guys,.

  I am creating an ini config file to save the selected serial port of VISA.

  I will adapt if the ini file doesn't exist then look to pc serial ports and choose one of them. If the file is read the value to use when I use data acquisition.

  In the example attached. I have a structure of event (such as my application), where I have a stocking to open the 'options '. If you open the main vi and pass the error, open the Subvi options and choose comport, if you click on 'ok' it save the ini file, if you click on "Cancel" it closes and show in the indicator of the value of the comport the .ini file. The Subvi works well.

  The problem is when I try to read the value of include an application start. I put the code but that's fake.

  I used "simple saving and loading control values" TST ( https://decibel.ni.com/content/docs/DOC-15349 ) and it works well for the control of the Sub - VI.

  Why I got error and I can not read ini value?... section and the key is correct. I can't find the problem.

  Concerning

  Fred.

  OpenG INI example explained on the-openg-vis-that-i-couldn't-live-without

• invalid boot.ini file

  Invalid Boot.ini, after press R for recovery... ask what window installation you want to log on... can you tell me the answer... thx

  When I turn on the computer, see the "invalid boot.ini files", "boot c:/window'...so I try to follow the microsoft statement gave me to start the computer from Windows XP Home edition CD Rom to solve the problem... when it loads to"Welcome to put in place"I press R for recovery then it asks me" which window system you want to connect on ' "

  One more time...

  XP end by load? If Yes, you probably do not even need to enter the Recovery Console. Follow the helpful suggestion of Jose from this page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/invalid-bootini-file-message-when-starting-Windows/1b329eec-ec6e-E011-8dfc-68b599b31bf5?msgId=9cc3909c-266F-E011-8dfc-68b599b31bf5

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• desktop.ini files

  files desktop.ini appeared on my desktop and after deleting the desktop.ini files it is files/folders that im getting APPLICATION DATA NOT ACCESSIBLE. ACCESS DENIED error message. I also get records that have a blue arrow on it, but these records are not on my computer before. This all started after my sister, transfer photos to my laptop. pls hel

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. You may need to re - download the pictures, but the restoration of the system normally does not affect data files so it's probably not necessary.

  BTW, do not delete the desktop.ini file - this is important.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connection problems (SSL)

  Hi all

  Curse of some connections problems that are driving me crazy.

  Installation program:

  Customer Internet (AppPortal)

  |

  |

  Fix (3 x NIC: 1 x WAN, 1 x DMZ, 1 x LAN)

  |                                       |

  Broker for connections.

  (the area demilitarized)                           Parallels Virtuozzo Containers VDIs

  VDIs are ready, PNtools installed, etc..

  AppPortal gets its configuration very well.

  I'm trying to get RDP over SSL working (using a free signed certs).

  LAN and DMZ are RFC1918 address space.

  RDP client message:

  CERT_E_UNTRUSTEDROOT (click)

  The computer cannot connect to the remote computer

  (...)

  Attached log files.

  Additional accessories:

  • 20110129_23_23_05.log.zip
  • broker01.txt.zip

  Your answer is wrong... CERT_E_UNTRUSTEDROOT... If you use a self signed certificate, the client must trust the certificate, without which it can not connect.

  Ensure that the client does not get errors certificate by importing the certificate in the trust of customers root certificate store in the "Computer" certificate store and you should have no problem.

• How to remove the entry for Hot Standby node in the odbc.ini file in Windows 7

  Although I could see the file odbc.ini under c: Windows, there is nothing specific to hot standby node in the file. I use windows 64-bit computer and I have issues with my odbc DSNS when connecting to another application, I need to delete the entry for Hot Standby node in the odbc.ini file based on what I had as a solution to solve the problem. My mistake was "communication error with the connection process. Find target processes while they waiting for answer', when I tried to pull a few tables to a data source by using the ODBC DSN.

  Hi Jay,

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Forums.

  I would recommend posting your query in the link below.

  General Windows Forms:

  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• How to enable detailed connection tracing ODI Studio? and how do I resolve a connection problem.

  Is it possible to get a detailed trace of connection attempts from the studio of ODI on my deposit work?

  I tried to enable tracing in changeant...\oracledi\client\odi\bin\ODI-logging-config.xml according to the instructions that I found here: http://haithanh8x.blogspot.com/2013/03/ODI-11g-agent-logging-tracing.html

  The studio.log file has been created, but it is empty.

  I use studio ODI and basically I want to troubleshoot why I can't connect to the repository. When I try the Test button, I get an error "Invalid repository connection", here is the error that is displayed under Details:

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection

  at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)

  at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:531)

  .........

  .....

  ..

  Other important details:

  1.-s' Please note that before I use the Test button under the repository login Panel, I'm able to choose my work deposit that was recovered in the receiving of work section using the magnifying glass.

  2 - I am able to connect to the database with SQLDeveloper using JDBC, in fact I can connect with exactly the same connection string that I use in ODI, also I have no problems connecting to the database using SQLPlus.

  3. - this repository database is on a cluster and as mentioned, I have no problems to connect to it with other tools. Don't know if being in a cluster makes a difference (I tried hostname, scan name and the names of vip to connect)

  4 - this database is running in another server, and I have had no problems connecting to the front. In fact, I restore to a different server no CARS and was able to use ODI. (maybe something in the new RAC server that does not allow the connection?)

  I would like to get a path to better understand what is happening while the Studio tried to connect to the repository. It seems to me it is able to read the name of the repository work so I don't understand why there are connection problems later.

  Question: is it the fact that I am able to read the repository name means JDBC work? (Please confirm)

  I'm running out of ideas on what to try, so your help is appreciated.

  Thank you!

  Answer the questions:

  1-to get a detailed trace

  One option is to use a thick connection instead of a thin. This requires the installation of customer Oranet and settings but allows you to trace the SQL in the side server. That will let you know what the problem is.

  2. to turn on tracing

  Under search support Oracle Oracle Data integrator, there is an information center that includes detailed instructions and examples (files) on how to configure tracing.

  3 - If the test button works and pulls the name of the repository work means that the connection works, unfortunately, is not sufficient because ODI does not use the connection string supplied to connect to the repository instead, it uses the language sql stored in the repository and uses SQL to connect, so location you will see two connections for the initial attraction of the repository data, and then the other link with the chain withdrew from the database. In this case, the problem was that the database of repository has been migrated to another server, the previous server that the connection was made with localhost, but it does not work on the current server, because it runs on CARS, so outside the ODI, I updated the SQL used to connect with the SCAN name instead , and I was able to connect. The SQL is illustrated in the trace obtained using a thick client.

• Use several of DV Panasonic NV-DS60 11 imported elements without problems.

  Use several of DV Panasonic NV-DS60 11 imported elements without problems.

  Now using elements 14 but this program does not SEE the camera.

  Why not 14 sees the camera and how can I fix this problem?

  joudar

  It's not Adobe, instead essentially a user to user forum. I saw the first 14 supported Import Formats of video clips list. My first impression is as follows. DV-stream (.dv) here does not refer to the ability of Premiere Elements to capture DV data using a firewire connection in Premiere Elements.

  It is my understanding that the raw DV via firewire can be stored in a file with a .dv file extension. You also have these same raw DV data via firewire can be stored in container (Windows) .avi or .mov (Mac). I'd say that Adobe 'Dv-stream (.dv)' refers to the import of a file DV.dv in a Premiere Elements project with add Media/files and folders.

  However, this interpretation reveals a problem because if I take a known Dv.dv file and try to import in first items 14, 13/13.1 on Windows 10 or 7 64-bit, it will not matter and gives the message saying that the file type is not supported or the codec is missing. This same DV.dv reproduces with the VLC Player.

  The frequency of the presence of Adobe in this forum is not defined. But, perhaps personal Adobe or Premiere elements support Team can clarify the inclusion of 'DV-stream (.dv) in its list of supported import Formats. There is certainly no more DV HDV data capture firewire premiere elements Capture window elements first 13/13.1 and 14.

  Will post more information that it will be available.

  RTA

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra